-
Anonymous users2024-02-15Wanlong Machinery will answer for you: my company's Raymond mill from raw material procurement to production process to factory packaging, each link is strictly tested and monitored, all of which use high-quality materials, and must achieve high standards and refinement, so that the products have a longer life. Henan Wanlong Machinery Manufacturing Co., Ltd. is mainly engaged in the production of large and medium-sized series of Raymond mill equipment and other products.
The main scope of application of this kind of products is ore, cement, refractory materials, bauxite clinker, corundum, glass raw materials, machine-made construction sand, stone and various metallurgical slag products. The distinction between good and bad products is mainly determined by various parameters and technological processes of the product, the selection of raw materials and other factors. Our company's products, both in terms of product quality and cost performance, are....
-
Anonymous users2024-02-14Different models are not the same, even if it is the same model, different manufacturers are not the same, the material workmanship must be more expensive, the material workmanship must be cheaper! You get what you pay for, you have to ask the manufacturer for details! o( o You go to consult Guilin Hongcheng's mill equipment, their products and services are good!
-
Anonymous users2024-02-13There are many kinds of Raymond mill models, according to different models, ** is also different, how much is Raymond mill please determine the model, and then consult the professional manufacturer Vanke Machinery!
-
Anonymous users2024-02-12This question is not appropriate to ask here, there are too many models on the market, and the fish are mixed.
-
Anonymous users2024-02-11The model parameters of Raymond mill are as follows:
Model. 6r4525
5r4119
4r3216
3r903r85
3r753r65
3r60 parameters.
4r904r85
Particle size (mm).
The particle size of the finished product (mm).
Shift production (t) with different material fineness
Shaft speed (revolutions).
One hundred and eighteen. Grinding ring diameter (mm).
Grinding roll diameter (mm).
Roll height (mm).
Host. y315m-4-132
y280s-4-75
y225s-4-37
y225m-8-30
y225m-8-22
y200l-8-15
Motor. y315m-4-132
y250m-4-75
y200l-4-37
y180m-4-22
y160l-4-15
y160l-4-15
y160m-4-11
Analysts. y160m-4-11
y112m-6-202
-
Anonymous users2024-02-10Raymond mill is suitable for small and medium-sized mines, chemical industry, building materials, metallurgy, refractory, pharmaceutical, cement and other industries of efficient closed-circuit cycle of high-fine milling equipment, is a new type of mill instead of ball mill processing powder, various technical indicators have reached the domestic advanced level, by the industry users praise. The product adopts the advanced structure of similar foreign products, and is updated and improved on the basis of large-scale Raymond mill. The equipment has higher efficiency, lower power consumption, small footprint and less one-time investment than ball mills.
The grinding roller is tightly pressed on the grinding ring under the action of centrifugal force, so when the grinding roller and grinding ring are worn to a certain thickness, the output and fineness of the finished product will not be affected. The grinding roller and grinding ring have a long renewal cycle, which eliminates the disadvantages of the short replacement cycle of the wearing parts of the centrifugal pulverizer.
The air flow of the machine is circulating in the fan grinding shell cyclone separator, so it has less dust than the high-speed centrifugal crusher, and the operation workshop is clean and the environment is pollution-free.
2. The degree of sealing is high, and it is not easy to enter the dust in the assembly during the production process, thus prolonging the service life of the bearing.
3. In the production process, according to the wear degree of the assembly bearing, the bearing clearance can be adjusted to ensure that the upper and lower bearings are concentric, and the bearings can be used continuously for more than ten months.
4. The new grinding roller assembly prolongs the maintenance cycle, reduces the maintenance intensity, reduces the production cost, improves the production efficiency, and can bring considerable economic benefits to the user.
-
Anonymous users2024-02-09The model parameters of Raymond mill are as follows:
Model. 6r4525
5r4119
4r3216
3r903r85
3r753r65
3r60 parameters.
4r904r85
Feed particle size (mm).
Finished particle size (mm).
Shifts of different material fineness (t).
Central shaft speed (r min).
Grinding ring diameter (mm).
Grinding roll diameter (mm).
Grinding roll height (mm).
Host motor. y315m- 4-132
y280s- 4-75
y225s- 4-37
y225m- 8-30
y225m- 8-22
y225s-
y200l- 8-15
y160m-
Fan motors. y315m- 4-132
y250m- 4-75
y200l- 4-37
y180m- 4-22
y160l- 4-15
y160l- 4-15
y160m- 4-11
y132s-
Analyzer motors.
y160m- 4-11
yc200-
yc120-
y112m-
y112m-
y112m- 6-202
y112m-
y90l-
-
Anonymous users2024-02-081. The three-dimensional structure of Raymond mill covers a small area, has a strong set of characteristics, and independently forms a production system from lump to finished powder.
2. The fineness of the finished powder is uniform, and the sieving rate is 99%, which is difficult for other grinding equipment.
3. The transmission device of the main engine of Raymond mill adopts a closed gearbox and a pulley, which has a stable transmission and reliable operation.
4. The important parts of Raymond mill are made of high-quality steel, and the wear-resistant parts are made of high-performance wear-resistant materials, and the whole machine has high resistance to damage and drafting, and the operation is reliable.
5. The electrical system adopts centralized control, and the grinding workshop can basically realize unmanned operation and maintenance.
-
Anonymous users2024-02-07About which manufacturer produces itRaymond MillA good question is mainly to see which manufacturer produces itRaymond MillIt can meet your production needs and reduce your need forRaymond MillObstacles in the process of use, that is to say, which Raymond mill has excellent performance and complete after-sales service, which is a good choice, the main situation is as follows:
If Raymond Mill ***.
It's not easy when you're working.
appearedDamagephenomenon, then not only will not affect the efficiency in production, but alsoReduced maintenance of breakdownsRequiredCost, whileThe quality is not good
In the production, due to the phenomenon of wear and tear, parts failure will occur frequently, and at this time, it will need to be shut down for processing, which will naturally affect the production efficiency of Raymond mill and increase the cost of fault maintenance.
And Raymond Mill'sPerformanceIt refers to whether the grinding requirements of the material can be met when working, as well as the size of the production capacity and the fineness of the finished product can meet the production needs of customers.
<> in addition to quality and performance, for Raymond MillsAfter-sales
If the after-sales service is complete, then it can reduce the obstacles encountered by the Raymond mill in use, otherwise, it will not only delay the production process, but also increase the obstacles to production, soManufacturers with complete after-sales serviceproduced Raymond mill after allOkay
AboutWhich Raymond mill is good
The analysis of the problem is mainly carried out from three aspects, namely:Quality, performance and after-salesand analyzes the importance of these aspectsComparison of Raymond mills produced by manufacturers with excellent performance and complete after-sales service
Okay, other about Raymond Mills.
Please consult the question in the hope that it will be helpful to you.
Beginner, 10,000 reliable, I bought, kawaii a10,000, cost-effective, hopeful!
Granulators include condensation granulator, melt granulator, steel belt granulator. This kind of granulator material is not in contact with water at all, the water content is low, there is no dust, and the particles made are full and uniform, the operation is simple, and the output is large and stable. The question of whether it is good or not, and who is better, is a matter of opinion. >>>More
The C3 four-dimensional color super produced in Shenzhen is about 250,000.
The ** of the computer stripping machine is about 10,000 yuan per unit, the cheap ones are thousands of yuan, and the expensive ones are tens of thousands of yuan. Different types of stripping machines are not the same. In terms of categories, there are: >>>More
It ranges from about 5000-10000, and domestic household wall-hung boilers are probably in this range. Because the wall-hung boiler has a power range, such as the Ruima wall-hung boiler, the same style, 20kw-40kw is not the same, the more powerful the more expensive; If it is a condensing wall-hung boiler, it is generally more than 10,000, because the technical process required is higher. The foreign wall-hung boiler brand is at least 8000 or more, in fact, the product configuration is almost the same, the quality is also about the same, but the ** is very different, if you use it yourself, it is recommended to use the domestic brand, which is more practical.