How to repair the peeling of the cabinet, what to do if the kitchen wall is peeling

1.If the skin is broken, you can not completely repair it at home or ask a general carpenter, only to take it to the cabinet store you bought, and ask the cabinet store to help you return to the factory for repair, if it is a small crack, it can be repaired quickly, if it is a large area of damage, it may be necessary to redo a door panel.

2.If it is within the warranty period, it generally does not need to be charged, and if it is beyond the warranty period, then you need to pay for it.

1: Directly shovel off the whole piece that falls off, scrape the surface with a scraper or blade to remove the remaining debris and residual glue, 2: Buy some AB glue and stir it evenly to coat it, and wait for the surface to be about six or seven dry 3:

Then paste a new veneer on the surface (the veneer is bought in the decoration material store, pay attention to buy the same color), 4: use the wooden square (you can also use a slightly thicker book) pad, and then use a hammer to beat it evenly and directly, so that the veneer is firmly pasted on the last point, if you are a handicapped party, then directly ask a carpenter master to do it, or your cabinet is not worth much at all, you are not short of this money, change it.

Cabinet peeling can ask the person who repairs the furniture, they have a way to do the repair, if it is too serious, you can only replace the cabinet.

The cabinet can be repainted, or it can be re-pasted with new skin!

How to repair the initial peeling of the cabinet? Buy some sticky. Glue the paper to him. It's not closed yet, it's still attracted.

How to repair the skin after removing it? Then you can buy some wandering milk, and brush some for him. Otherwise, there is nothing. Can only send good.

1. Reinforcement the base layer of the noisy wall first, shovel off the wall surface of the peeling area, completely remove the debris on the wall, and repaint putty and paint. 2. The method of remedy for wall cracking is to apply the adjusted putty and paint to the cracks, but it cannot be completely eliminated. If you want to prevent this problem, you should scrape the last putty after it has dried thoroughly during construction, and the thickness of the putty should not exceed 2 mm each time.

When reworking and repairing, the cracks should be scraped clean, scraped with putty, and the topcoat should be applied again after the putty is dry.

1. It should be noted that there is a difference between the paint applied to the interior and exterior walls, and the interior wall latex paint has high requirements for scrub resistance, and it is easy to stain the wall in home life, and it can be wiped with water at any time. The reason why exterior wall paint can be used to paint interior walls is because it has water resistance, and interior wall paint has no sun protection function and cannot be used to paint exterior walls.

2. Sometimes there will be blister-like protrusions on the walls of the kitchen, which will fall if you touch them. This may be caused by too much pigment added or mixed with impurities in the paint mixture; Paint barrels, brushes, rollers are not clean; When the paint surface is not dry, the moisture penetrates into the paint, resulting in the paint film is de-adhesion; The walls were not cleaned in time when they were painted.

3. Generally, the mold of the kitchen wall is due to the fact that the room is too humid or soaked in water for a long time, so that the wall is prone to spotted mold, or the mold of the messy luggage area, and moss will even grow out of the wall with a delay.

1. Solution: If the door paint is not very serious, just a small part, it is recommended that you use some simple furniture maintenance materials, only need a gentle spray, very convenient and fast, now the hand spray paint on the market is almost 8 yuan a bottle, not expensive. Another way is that if the paint on the door is more serious and the whole piece is detached, it is recommended to re-paste it with 502 or other glue.

If you want to renovate the door, you must first know what kind of door paint was used before the door, and the repair paint should be the same brand as the original paint, so as to avoid the phenomenon of paint not drying and color difference. If the damage is recessed, then use 502 and wood powder to repair it, then use a knife to sharpen, sandpaper sanding, and then use Snickers water combined with toner to repair the paint.

1. Reasons for discoloration:

1) The ester solvent in the varnish reacts with the iron container and turns black after encountering water.

2) Turpentine is easy to produce reddish-brown pigment in iron drums.

3) Gold and silver powder and varnish are prone to acid etching, which makes the paint color green, dark and tarnished.

4) The storage period is too long, and the precipitation is discolored.

2. Prevention and control methods:

1) For the shellac varnish that is most prone to discoloration, use a non-metallic container.

2) Add gold powder and silver powder before using the varnish, and do not add it to the varnish too early for storage.

3) For the precipitated discolored paint, if it is not a quality problem, it can still be used after full stirring.