What are the common stone repair materials and what are the stone repair methods

If there is a slight flaw or stain in the stone, the marble can be restored to the same bright and bright as the original by stone restoration. Restoring a stone (or marble) is a work that requires a lot of skill, but it's worth taking the time out to fix it, it will make your marble look like new. Wax coating on the stone plate is the earliest application, the lowest cost, and it is also the most commonly used method for some stone manufacturers to obtain a better gloss and board effect.

It can cover up some small cracks on the board surface, and can also increase the luster and color of the stone. However, this method and material cannot solve the problem fundamentally, and the durability of the effect is poor. If the waxed sheet is used outdoors, it will reveal its true appearance in a short time.

In addition, the waxed stone is not breathable due to the wax blocking the pores of the stone, which often leads to the lesion of the stone, and also makes the stone protective treatment difficult. The wax also attracts dust, making the surface of the treated stone susceptible to contamination. Unsaturated resins are used in stone repair and reinforcement Unsaturated polyester resin is a thermosetting resin that, when it is applied to heat or initiators, cures into a polymer reticulated polymer.

It is applied to the repair and reinforcement of stone based on the following faces: fast consolidation; Low viscosity, easy to use and operate; Light color, good transparency; The colloidal hardness is high and the polishing is good; Simple formulation and low cost. If your marble has a missing corner, and the fragments or missing corners are not found, then you need to find a material similar to marble.

The exact outline of the fragments is measured with a simple mold made of wax paper. The mixture of white powder and polyester resin cement can then be used to fill in the missing pieces. It is not difficult for a skilled master to operate.

Stone repair spots and color line materials are their own experience with a variety of chemical materials ratio, this is their own confidential project, our method is according to the color ratio of the various components of the stone out of the dye that does not fade, and then according to the color of the stone embellishment, to achieve the effect of sensory color consistency.

1. What are the materials and methods of stone repairIf there are some defects or holes in the stone, we need to repair it through a series of materials and in accordance with the correct method. Prepare wax that brings about restoration and increases the shine and color of the stone. In addition, unsaturated resin can also be used to strengthen and repair to avoid the problem of cracking again in the later stage.

The surface of the stone is cleaned first, which can be used to repair holes or cracks on the surface of the stone, which can bring high strength and fast bonding speed. If there are some holes or defects, the defects need to be cleaned and the dust is vacuumed. Next, select the same quality material to crush it, and mix it with resin glue to fill it up and make up for it.

Later, the surface is polished by a grinding machine, and then waxed, which can restore its luster.

Stone is one of the common decoration materials, especially the necessary materials for public decoration, we only see the atmospheric side of stone decoration, and do not understand the common methods of stone surface treatment, here is a simple and talk! There are polishing, grinding, pickling, chopping axes, burning, cracking, tumbling, brushing, etc.

Polished: High gloss surface. Polishing may or may not last for a long time, mainly depending on the type of stone. Granite, dali, and limestone are usually polished and require different maintenance to maintain their luster.

Polishing: The polished surface looks "soft" and has noticeable scratches that do not require much care. Marble, limestone and slate are suitable for polishing.

Pickling: There are small traces of corrosion on the surface. The pickled surface has fewer scratches and a more rustic appearance than the polished surface. Most of the stones can be pickled, but the most common are marble and limestone. Pickling is also a way to soften the luster of granite.

Chopping axe: The surface is not smooth. After the initial cut, the stone is further processed to eliminate visible saw marks, but the results are not as good as those after polishing. Granite, marble and limestone can be treated in this way, often in a custom-made situation.

Fire: Rough surface.