-
It's not that I hit you, there's no way, you know that you don't know the warranty coverage if the phone is not water and liquid, you want to find them, then you look at what they gave you, what the agreement says, whether you signed it, if he says that the repair may not be able to be used, if you still sign, then you think you are unlucky. If he gives you an agreement that it can be used, it can be used for a long time, and there will be no problems after repairing, etc., and if such a problem occurs, it is not free to repair, if so, you can go to him and ask him to repair your machine until they can't repair it, and you can also ask them to be responsible for you.
-
If you don't want to be angry, buy a new one as soon as possible!
-
Talk to them, it's not good to find the consumer association, repair the mobile phone to repair the can be used miscellaneous, spend that more money to repair that still can't be used, that's not the same as not repairing (others are talking about repairing not repaired, who told him the times), they are unreasonable, if they don't solve it, find the consumer association to complain to them.
-
Let's complain! The main question is whether the leakage is before or after the repair, if it occurs after the repair, it is necessary to find the consumer association to defend the rights, "maintenance" means maintenance and repair. Since we are looking for a professional customer service staff to "repair", it is to restore the function of the product.
If you say that you can't "repair" at the beginning, the customer service will not be responsible. However, since you accept the customer's "repair" request and application, it is your responsibility to acknowledge the subsequent associated liability. And if you pay for "repairs", there is a commercial sense of a "transaction".
So the customer service is responsible. You should go to the Consumer Association! ~!
-
You go to the mobile phone accessories manufacturer to buy a power amplifier for your mobile phone, note: (to be fully paired) you hand over the mobile phone repair to ask him to help you change, your mobile phone is definitely not corroded 3,
-
There is no warranty for liquid ingress in mobile phones anyway, let alone replacing them with new ones, once the mobile phone is injected, the motherboard itself will be very unstable, so anything can happen, and you should consider it before repairing. Even if you fix this kind of liquid-fed machine, it won't last long.
It is impossible for him to give you a new machine, because there is no basis for the three-guarantee law, but you can negotiate with him and ask him to refund some of the money to you.
-
First of all, it depends on the degree of liquid ingress into your mobile phone at the beginning, because if there is more liquid intake, it may cause oxidation of the motherboard solder joints and antennas, and you need to clean it. That's your responsibility in the first place.
Secondly, it may be a legacy problem caused by not cleaning carefully during maintenance. It can also be a man-made failure caused by a low level of technology. There is also a possibility to distinguish whether it is a disconnection caused by a bad signal, or an automatic hang-up problem caused by the failure of the button (that is, the keying of the change) in the hang-up button.
Due to the problem caused by the liquid in the mobile phone, there may be many potential failures, which cannot be completely eliminated, so there is the possibility of "repairing one kind of failure, but bringing out another failure", and the mobile phone repair industry is also helpless for this kind of problem, and will not bear this responsibility.
You can take it back and ask him to help you overhaul it, have a better attitude, and then be more tactful yourself, and meet a Lei Feng again, that may be able to help you get it.
-
You are the consumer, and you say whose responsibility it is.
Consumers should protect their rights and interests.
Be bold.
Go for theories.
-
If the failure is frequent, it is a problem with the maintenance point, I suspect that the motherboard is deformed when cleaning the machine or when installing the machine, and the power amplifier and some of the original parts are desoldered, I estimate that the maintenance department does not admit responsibility, because the fault was not repaired at that time. If necessary, you can go to the Consumer Association to complain. If it's not a big problem, consider yourself unlucky.
-
1. Falling into clean water when the power is on, this situation generally does not need to be disassembled.
1 Power off as soon as possible.
2 Shake the finch dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.
3 Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. After these three steps of processing, the power supply can basically work normally. Carry wisdom.
2. Drop into non-corrosive liquid in the case of power failure. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.
1 Shake dry vigorously, but don't shake the machine off.
2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.
3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest Qinzao maintenance department for processing or dismantling the machine for cleaning by yourself.
-
Wash the tail wipe with alcohol!
-
Yes, your phone is probably burned. The normal method of water treatment for mobile phones is like this. After water ingress, do not turn off the machine, and directly remove the battery.
And then it's rubbing. It also depends on what kind of water it is. If only the water were better.
If it's not clear water, other measures are needed. After wiping it off, Li Soluan kept it hanging for a few days. Or use a hair dryer to blow cold air.
After that, it can be turned on. In your case, it is estimated that the motherboard is already broken. Repair it after the sale, so that if you miss the match, they can still help you continue to repair, and personally, they will replace the good parts on your mobile phone, and you will lose more than you gain.
Attention, I have encountered the same problem as you, don't be afraid to lose it, to the customer service to repair the machine only need to flush the machine to electricity, and in all parts of the country, you have a record in the machine, customer service can check whether it is a licensed parallel import, and if it is not within the warranty period, do not need to bring an invoice, and if it is out of the warranty period, it will cost money, and it is very expensive to repair there, it will be no problem during the warranty period, rest assured to go!
Feedback questions with them.
They will guide you. >>>More
All of Nokia's screens are broken, including the screens of many machines, which have to be returned to the factory for repair, that is, you said that they should be taken to the company. >>>More
The data connection is to use the mobile phone as a USB flash drive, and the offline mode of the mobile phone must be used to use this mode! I also use 6120c, and my phone's dictionary works fine! Are you not using the memory card originally sent by the mobile phone, and replaced it with a new card, right, the dictionary data is stored on the original attached card, you need to use the new card, the new card is re-checked, and then on the computer, copy the files on the randomly attached card, including folders, to the new card, and then plug in the mobile phone to use, I believe that your dictionary can be used! >>>More
You see if the SMS center number is set, generally in the SMS option to set GPRS can not be connected, it may be that the network settings are not set up · i. Network settings. >>>More