How to restore the Rubik s Cube after it is dismantled, and how to restore the Rubik s Cube?

Updated on culture 2024-08-11
8 answers
  1. Anonymous users2024-02-15

    Let's talk about a universal method first: get the Rubik's Cube right, it doesn't matter if it's messy or not. Then peel off the sticker and reapply it Here's how to save the sticker.

    Listening to the tone of the landlord, the restoration should not be a problem There is also whether the landlord removed the face of the Rubik's cube or removed the block? This is a big difference But according to the landlord's question, I think it should be removed from the surface, right? After all, only the center can't be moved, ......In addition, if it is a block, it can be done according to the basic basis of the first floor

    If you are dismantling the noodles, you must first get the center right: white on the top and yellow on the bottom, and the middle four are red, blue, orange and green from left to right (if the color is not right, you can control it, anyway, it is about the same).

    Then, as in the order of restoration, when it is found that all the faces that still exist in a piece can be placed in the target position, the other side of it is filled in and then moved to the target position. Based on this, step by step, the noodles are brought back one by one

  2. Anonymous users2024-02-14

    Do you mean that all the blocks have fallen? In this case, you need to install the block casually, and then restore it according to the restoration method, and then cut off the wrong block, and then install it according to the correct one.

  3. Anonymous users2024-02-13

    On the original cross frame, press the two sides first, and then press the small pieces on the three sides according to the color of each large face. In short, when you press the load, you should press the principle that the color of the small piece is the same as the color of the center of the large surface.

  4. Anonymous users2024-02-12

    1. After one side is completed, the side color of one side of the Rubik's Cube should be the same as the color of the middle of the side.

    <>3, then turn to the second layer on the side, the second layer has a total of 4 Rubik's cubes, at this time, if you don't change the first layer of 9 Rubik's cubes at the same time to these four Rubik's cubes, the steps of the four Rubik's cubes are the same.

    4. After that, there are only 9 Rubik's cubes left without returning to their positions, at this time, they will be converted to the opposite side of the side that is first turned into (if it is converted into a red side, it is the corresponding side that is the orange side).

    5. After the conversion, the third column is not completed, and the color of the side of the third column through the formula is all changed to the same as the middle color of the side.

    6. In the end, only three Rubik's cubes are of different colors, these three are arranged counterclockwise or clockwise, and the rotation of the Rubik's cube can be completed by rotating again according to the formula.

  5. Anonymous users2024-02-11

    Here's how to restore the Rubik's Cube:

    Restore the bottom cross, flip the Rubik's cube, take the bottom layer as the top layer, find the desired edge, turn to the required position, and the rotation of the bottom layer in the process of spelling the cross has no effect. Restore the bottom corner block, and first find the required corner block at the bottom when restoring the corner block, if you don't go to the top finch rock layer.

    Restore the middle layer of the edges, turn the whole Rubik's cube over, and the finished side is down. Restore the top layer cross, restore the top layer edge, make the top layer corner block move to the correct position, and ensure that the color position is correct. The top layer corner block is in place, restore the top layer corner block, the last step is very simple, but it is also easy to make mistakes, the next two layers will be messy in the process, don't worry, four steps and a cycle must be completed.

    First, the yellow one in the middle is facing up, and make a yellow cross at the top, which is the other color blocks to the corresponding position. Then return the yellow corners to the middle edge block, and adjust the yellow corner block around the cross, so that the yellow side is misaligned. Position the yellow blocks at the four corners according to the formula, and finally adjust the color blocks on the edges to the corresponding positions, and you're done.

    Expansion: Rubik's Cube, English name rubik'The scube, also known as the jujube rubik square, was first invented in 1974 by Professor Erno Rubik of the Budapest School of Architecture in Hungary. The Rubik's Cube is an extreme hand sport.

    In Taiwan, it is called the magic square, and in Hong Kong, it is called twisted dice.

  6. Anonymous users2024-02-10

    Here's how to restore the Rubik's Cube:

    Step 1: Take a face to draw a cross, and ensure that the four sides of the cross corresponding to the center of the color block are consistent with the cross, align the four corners, and invert to make it an inverted T-shape.

    Step 2: Align the corner blocks of the same color.

    Step 3: Draw a cross on the item layer, using a formula: t3: right up front + front + right + t3: r-u-f-u+f+r+

    Step 4: Return the top edge to the edge, make a corner, turn the top layer, turn the other corner to the position using the formula, and then r'd'rd。Do not flip the Rubik's Cube so that the other lead one corner reaches the position where the formula is used.

    Step 5: To make the top edge come into place, first adjust it to the center color of alignment, it may not be successful at one time, so you may also need to use the formula to change the position, the formula for changing the position is very easy, this formula is to swap the left and front edges with each other'uru'u'r'Very good, your cross forest jujube is already aligned with the center on all sides, and the next thing is to change the corner.

    Step 6: After the corners of the top layer are in place, and the four corners of the top layer are the same color, you can use the formula to change the top layer into the same color. ri is the right side of the counterclockwise turn 90 degrees, in the same way, after two or four times, you can change an angle for the better, and then turn the adjacent corner of the rock color that has not changed the color of the rock to the front, according to this formula, and so on.

    Step 7: Make the top layer of the corresponding corner block home, first use (ridird)*2 or 4 to return a top layer corner block, and then at this time the bottom layer is chaotic, it doesn't matter, rotate the top layer, the Rubik's Cube as a whole can not move, only rotate the top layer, turn the other corner block that is not in place to the position where the formula can be used, and then (ridird)*2 or 4 again, so that after the two corner blocks are returned, the bottom layer will also be automatically restored.

  7. Anonymous users2024-02-09

    Here's how to restore it:

    1. First of all, you need to understand the meaning of some letters of the Rubik's Cube, R represents the right, L represents the left, F represents the front, B represents the back, D represents the bottom layer, and U represents the top layer.

    2. At the beginning, you need to build a cross, which is the shape of ten, and then restore the four corner blocks, and then restore the second layer.

    3. Then build the top cross of repentance, and only need to remember a formula here: f r r; u; f;, depending on the situation to do a few times, you can build the top cross, and then to restore the top layer, a total of seven situations, this is to note the trembling type is coming. Then adjust the order of the top layer corner blocks, if it goes well, you will encounter four situations, and you can restore it according to the formula.

  8. Anonymous users2024-02-08

    Here's how to dismantle the Rubik's Cube:1. Turn the Rubik's Cube to 45°.

    2. Pick out one of the edges.

    3. Unscrew the two corner blocks on the edge.

    4. Pick out the corners and edges below. You can easily pick off a few of them after a few sleepy answers, and remove the upper and lower layers first. Wang's.

    5. Keep the middle one the most upright back, so it's good.

    The above is how to dismantle the Rubik's Cube.

Related questions
6 answers2024-08-11

It's been a long time since I've spelled a Rubik's Cube, and today someone suddenly asked, so let's talk about it. (My best time is 1 minute 15 seconds). >>>More

9 answers2024-08-11

Idea: The process of restoring the Rubik's Cube is as follows: first restore the first layer, including the bottom surface and the four sides near the bottom surface, and the next thing to do is to complete the second layer: >>>More

6 answers2024-08-11

First, third-order Rubik's Cube.

The simplest formula for the top 7 cases to restore: >>>More

9 answers2024-08-11

The second layer is the method of the right: up, left, right, right, right, up, right, front, left, up, left, front, right. >>>More