-
Anonymous users2024-02-15Go to the computer city to buy a VGA cable, buy a slightly better one, and the cheap image will interfere. Before connecting, pay attention to the resolution of the computer host is best placed in 1024*786, the image may not be displayed if it is large, the image is not clear if it is small, and the refresh rate must be 60Hz. Then find the VGA interface of the TV and the VGA interface of the computer,Connect the two with the cable you just bought,Use the TV remote control to switch to VGA mode (some may display computer input) can be displayed。
If it's a notebook, generally press the fn key and the shortcut key at the top of the notebook (the one with the display symbol), and it will be displayed normally!
-
Anonymous users2024-02-14Dear users, hello!
1. The resolution of the computer should be within the range of the TV, and the specific range can refer to the random manual of the TV.
2. The refresh rate of the computer should be 60Hz.
3. Turn on the TV first, put the TV signal in the VGA state, and then start the computer host to let the TV automatically identify the computer's signal (note: don't turn on the computer first and then turn on the TV, there may be no picture).
If it is connected to a notebook, the first three points are the same as above, and it is still not displayed after connection, you can press the fn+ switch key of the notebook (according to the computer brand), and the screen can be displayed.
-
Anonymous users2024-02-13There is no need to adjust the resolution of the computer monitor,You need to reconcile the resolution of the graphics card port connected to the TV,Generally42The resolution below 42 inches is1376*768,The resolution above 42 inches is1920*1080
-
Anonymous users2024-02-12Dear users:
1. The resolution of the computer should be within the range of the TV (such as 1024*768, etc.);
2. The refresh rate of the computer should be 60Hz.
3. Turn on the TV first, put the TV on the computer, VGA, and PC, and then start the computer host to let the TV automatically identify the computer's signal. (Note: Do not turn on the computer first and then turn on the TV, that may not have a picture);
4. It is recommended to connect a PC audio cable as the output of the sound.
-
Anonymous users2024-02-11Are you sure you are this is the original ** Konka LCD? Why can't I find this model?
-
Anonymous users2024-02-10Find the toggle menu first, and select VGA mode in it. Some remote controls have direct switching (such as a signal or a computer key).
-
Anonymous users2024-02-09Dear Konka users:
Hello, sorry for the inconvenience caused by the product! According to your description, it is caused by the high resolution, Kangsui Lijia LCD TV is used as a monitor, it is recommended to use a VGA cable connection, and please pay attention when setting:
1. The resolution of the computer should be within the range of the TV (such as 1024*768, etc.);
2. The refresh rate of the computer should be 60Hz.
3. Turn on the TV first, put the TV on the computer, VGA, PC (according to the dialog box that pops up in the remote control menu of the TV, the computer signal source of the stool displayed by different TVs is different, if there is an option in the TV menu "computer", select the computer), and then start the computer host to let the TV automatically identify the signal of the computer. (Note: Do not turn on the computer first and then turn on the TV, that may not have a picture);
4. It is recommended to connect a PC audio cable separately as the output of the sound.
-
Anonymous users2024-02-08Modify your computer's display properties and adjust the resolution to suit your TV.
Have you ever encountered that the resolution of the monitor is suddenly abnormal, and you can't adjust to the normal resolution in the system? For example, it used to be 1440*900 resolution, but now it has become 1280*800 resolution, and there is no correct resolution option in the system resolution adjustment options. When the display resolution is incorrect, the displayed font and image will look blurry and incongruous, affecting normal use. >>>More
The problem you are talking about is the point distance of liquid crystals. If you look at the liquid crystal carefully, it is a small grid, and the small grid of the computer monitor is relatively large, because we generally look at it far away, at least a few tens of centimeters away, and the LCD grid is too small to see clearly. >>>More
May I ask the landlord, is your computer different after the adjustment, as soon as the computer is restarted, it will change back? >>>More
The resolution of the phone cannot be adjusted.
In the evaluation criteria for the display effect of the mobile phone screen, the resolution is an important indicator, which is a hardware parameter and cannot be modified. >>>More
Because third-party software uses a relatively low resolution when developing, this is for the sake of the versatility of the software. Your monitor is good, but some users have low resolution monitors, so in order to take care of it, they use a lower resolution. There are also software manufacturers that can support a variety of resolutions, so that the programming is complex and the cost will increase.