What is the effect of car latte art? When applying latte to the car, what problems need to be paid a

Decorate the body and enhance the personality The shape, pattern and color of latte art can be well integrated with the body shape and color.

Protect the paint surface and avoid scratches When decorating a large area or part of the latte art, it can effectively prevent the damage caused by scratches or slight scratches caused by the impact of wind and sand.

Advertising Advertising latte art decoration is the most resource-saving mobile media carrier, which is convenient and practical, and the cost is low. Paste more car dealers' logos and trademarks of car peripheral products.

Unified logo, easy to identify The body latte decoration of the unified pattern is mainly used for the latte art pattern of some teams or car clubs and other participating activities, as well as the unified logo of the team such as self-driving tours and off-road.

I think that it is generally the wedding car that gets married and picks up the bride to use this thing to have this kind of decoration.

Of course, it is a special reminder that it is best to choose natural wood carving if wearing a pendant Buddha card, which is more beneficial to human health, try not to bring metal or materials that are not easy to health, and it is recommended to go directly to the temple to please, or Buddha dust.

The adhesive will leave an offset mark, and if you want to remove it, it will hurt the paint surface.

If it's a magnet, it will rub against the paint.

No good anyway.

Although there are few strokes, it seems simple, but the structure is the most difficult to grasp, and the philosophy is also intriguing. 1. It takes two strokes to write a person, and it takes a lifetime to be a man, one for the first half of his life, and one for the second half of his life; Write forward in one stroke.

1. The choice of the position of the latte art is very important, so as not to affect the line of sight of the car. 2. Choose the best products for latte art, and don't choose those that are easy to fade and fade. 3. The choice of pattern should make people comfortable, and do not choose a pattern that causes discomfort.

First, it is best to use tape to gently stick it on it, second, don't leave too many traces on the car, third, to make the latte art look better, fourth, pay attention to symmetry, fifth, pay attention to the choice of color.

Pay attention to the car paint, to avoid sticking on the glass, to pay attention to the body clean, the range of the paste should be moderate, not too large an area, the sticker should be controlled within a certain range, in order to have the corresponding beauty.

1 If you tear car stickers by handIf you tear car stickers by hand, you might as well try the "physical heating" method. After the adhesive is heated and softened, it is gradually removed from the edges of the car sticker. However, this method does not completely remove the clean residual glue, and the temperature should not be too high.

The most difficult thing is offset printing. Here's how: Required Items:

Tar Cleaner, Shellac, Gum Remover, Viscose Remover, Alcohol Cleaner, Warm Water Towel 2 Removal MethodRemoval Method: Wipe with alcohol, and it is estimated that many riders also try to wipe some stains that are difficult to remove with alcohol. I'm here to tell you that sometimes alcohol itself has a strong cleansing effect.

Medical alcohol can be cleaned**, and there is nothing to say about the car. However, it should be noted that alcohol is highly volatile. When wiping, make sure the alcohol is strong.

Cleaning with detergentSometimes detergent can only be used to clean grease stains, but in the case of adhesive backing, it cannot exert its full strength. At the same time, the paint itself cannot be cleaned with cleaning balls, which can easily damage the surface of the paint, so it is still difficult for the cleaner to remove this stain. 3 Wash with toilet water Wash with toilet water" toilet water is also the preferred choice for cleaning that most car owners love, because it also contains alcohol and smells good, so it is more suitable for cleaning cars.

Fu Zhijun said that there are some other formulas in the toilet, so be careful when using them. Remove the adhesive and apply the correct medication to the case, divide the remaining adhesive into chunks, spray the corresponding area of the body with adhesive remover, and wipe it off with a clean, soft towel. This method works well for most black gums, and it works well.

It can be said that this is the right remedy for the case. Professional adhesive removers, while asphalt cleaners, shellac, and gum removers are professional products for removing body adhesive, they often have very strong odors, and their formulations are also chemically synthetic. If the vehicle is used for a long time, it will corrode the vehicle paint and cause unnecessary damage to the vehicle.

If you tear the sticker by hand, you can try the "physical heating" method, and the adhesive is heated and softened, and then gradually removed from the edge of the sticker. However, this method cannot completely remove the clean adhesive residue, and the temperature should not be too high. The hardest part is offset printing.

Here's how:1Must-have items:

Tar detergent, shellac, gum remover, gum remover, alcohol detergent, warm water towel 2. Cleaning Method: Wipe with alcohol.

It is estimated that many drivers will also try to wipe some stains that are difficult to remove with alcohol. I'm here to tell you that sometimes alcohol itself has a strong cleansing effect. Medical alcohol can be cleaned**, and there is nothing to say about the car.

However, it is important to note that alcohol is volatile. When wiping, make sure the alcohol is strong. Cleaning with dish soapSometimes dish soap can only be used to clean oil stains, but in the case of adhesive backing, it cannot give full play to its own strength.

At the same time, the paint itself cannot be cleaned with a cleaning ball, which is easy to damage the paint surface, so it is still difficult for the cleaning agent to remove this stain. Wash with toilet water" Toilet water is also the first choice for most car owners, because it also contains alcohol and smells good, so it is more suitable for cleaning cars. Fu Zhijun said that there are other formula foods in the toilet, so be careful when using them.

Remove the adhesive, apply the correct medication to the box to break the remaining adhesive into pieces, spray the adhesive remover on the corresponding area of the body and wipe it with a clean, soft towel. This method works well for most black gums. It can be said that this is the right medicine.

Professional adhesive removerAlthough asphalt cleaners, shellac, and adhesive removers are all professional products for removing body gum, they usually have a strong odor and the formula is also chemically synthetic. Long-term use of the vehicle will corrode the paint and cause unnecessary damage to the vehicle.

I firmly believe that many young people's car friends are based on the body sticker on the latte pattern case to highlight the personalization, so how to paste the latte art of the car? Will the body latte art endanger the annual inspection?

Because the body latte has a high demand for lamination, it is recommended that car enthusiasts go to a professional car beauty salon to carry out practical operations as much as possible when the latte art with a total area is too large.

Let's give us a brief introduction to the pasting and dispersing process of automobile latte art:

Cleaning: Clean the car body neatly, especially the parts that are latched.

Sprinkling: Sprinkle water on the fit area after cleaning.

Lamination: Tear off the bottom paper of the latte art, and evenly spread the latte on the body, and finally carefully scrape the bubbles in the latte art according to the scraper (the actual operation of the latte art is as soft and slow as possible, otherwise it is likely to cause the deformation of the latte art).

Tear off the film: After all the scraping is smooth and symmetrical, the protective film on the surface of the latte is torn off, and the latte lamination work can be carried out.

Will the body latte art harm the annual inspection?

The state's management methods for car latte art are as follows, if the paper sticker of the body does not meet the above requirements, it is not possible to pass the Spring Festival trial, and at the same time, if you walk on the road to Chongyu and are seen by the police uncle, you may also encounter a penalty of 500-1000 yuan.

1.Because the bright red color of the special type for fire safety, the light yellow of the special type for emergency repair of virtual bridges in engineering projects, and the blue color on the top and bottom of the national comprehensive law enforcement special type all belong to the special color of special vehicles, therefore, we generally cannot apply the car.

2.Car painting, pasted logos or body advertisements shall not affect driving safety.

3.The total area of the car paper sticker shall not be higher than 30%, if it exceeds 30%, it shall apply to the transportation department for filing.

Millions of car purchase subsidies.

How to tear off the car latte art:

1. Physical heating removal method: After the adhesive is heated and softened, it is gradually removed from the edge of the car sticker. However, this method does not completely remove the adhesive residue and the temperature should not be too high.

2. Alcohol removal method: alcohol itself has a strong nuclear lifting and cleaning effect, it should be noted that alcohol is easy to volatilize, and the concentration of alcohol should be ensured when wiping.

3. Toilet water cleaning method: Toilet water is also the first choice for cleaning, because it also contains alcohol, and there are some other formulas in the toilet water, so try to be cautious when using it.

4. Adhesive removal cleaning method: divide the residual adhesive into blocks, spray the corresponding area of the body with adhesive removal, and wipe it with a clean soft towel to remove it.

5. Professional remover: professional tarmac cleaner, shellac, and gum remover are professional removal of body adhesive items, but often the smell is very strong, and its formula is also chemically synthesized.