What is the best way to drive and encounter the glare of the sun and the glare of the high beams? 5

Put down the visor and shake each other with the headlights.

1.Look away from the light source

When the human eye sees bright light, the pupils will shrink instantly, and it will take a long time to return to seeing objects in dim light, and when you turn on the high beams on the oncoming vehicle, you will find that the road ahead is not clear even under the illumination of the headlights. Therefore, when we find that the vehicle in front of us has far lights, we should avoid the light point as much as possible, although this is also very dazzling, but it can alleviate the observation of the road after strong light.

2.Adjust the headlight height

A few friends complained to me that when driving at night, the oncoming vehicle did not turn on the high beams when it was far away, but when it was about to meet the car, they turned on the high beams, and they did not turn on the high beams at all, why were they still shaken? Actually, it's very likely to be bigThe height of the lamp is related. Some models are equipped with headlight height adjustment, you can try to lower the headlights, and models that do not have this function can find an open basement to adjust manually, or you can find a repair shop to adjust.

3.Slow down your car

While avoiding the light source, you must slow down, because at this time, except for two strong lights, everything next to you is not clear, if you are not following the car, you can even stop and wait, it is very dangerous to not be able to see the things in front clearly.

4.Flash the high beams several times in a row to alert each other

While doing the above actions, we can also flash the high beams three times in a row to give the other party a hint to turn off the high beams. But not everyone will obediently turn it off, in this case, we should not turn on the high beams to fight back, which will cause the opponent's eyes to see clearly in front of them.

1.Use the mirror anti-glare function

As mentioned earlier, what should we do when we are shaken by an oncoming vehicle, but if we are shaken by a vehicle behind us? At this time, the use of anti-glare rearview mirror is the best solution, automatically turn on the switch, manual need to use the small button below the rearview mirror to switch it, this is the fastest and most effective solution.

2.On the premise of ensuring safety, prompt the rear car

If the rear car continues to turn on the high beams, or frequently flashes the high beams, you can use the intermittent braking method to remind the rear car, but remember not to retaliate against the rear car to brake suddenly, this will endanger the safety of yourself and others, just point to the end. If the car behind still ignores and continues to turn on the high beams, then there is no need to over-prompt.

3.Slow down and give way

As the saying goes, "if you can't afford to hide". If the other party still continues to turn on the high beams, simply merge the line steadily, let the other party pass, for their own safety, and at this time to maintain a good attitude to face, do not have a sense of revenge and competitiveness.

Driving with high beams dangling is the most hated thing for drivers, and it is also the most prone to traffic accidents. So, what to do when you encounter such a situation?

1.Shaken by the vehicle on the opposite side.

Keep your eyes away from light sources.

When the human eye sees bright light, the pupils shrink instantly, and it takes a long time to recover from seeing objects in dim light. When the oncoming vehicle turns on its high beams, it will find that the road ahead is not clear even under the headlights. Therefore, when we notice that the vehicle in front of us is turning on the high beams, we should try to avoid the light spots.

Although it is also glaring, it can alleviate the observation of the road after bright light.

2.Adjust the headlamp height.

A friend complained to me that when driving at night, the opposite car did not turn on the high beam when it was far away, but when it was about to clear the noise, the high beam was turned on, and the high beam was not turned on at all. Why is it shaking? In fact, this is probably related to the height of the headlights.

Some models are equipped with headlight height adjustment, so you can try lowering the headlights. Models that do not have this feature can be manually adjusted in an empty basement or in a workshop.

Slow down. While keeping your eyes away from the light source, you must slow down, because at this time, except for two bright lights, everything next to you is not clear. If there is no car behind, you can even stop and wait, it is very dangerous not to see what is in front of you.

4.Flash the high beams several times in a row to alert each other.

While doing the above, we can also flash the high beam three times in a row to give the other person a prompt to turn off the high beam. But not everyone will turn it off obediently. In this case, we should not turn on the high beams to counterattack the other party, which will cause the other party's eyes to see clearly what is ahead, and it is a terrible thing to not see clearly in both cars!

Second, it is left and right by rear vehicle 1. Use the anti-glare function of the rearview mirror.

As mentioned earlier, what to do if you are shaken by an oncoming vehicle, and what if you are shaken by a vehicle from behind? At this time, using an anti-glare rearview mirror is the best solution, just automatically turn on the switch and manually switch it with a small button under the rearview mirror, which is the fastest and most effective solution.

2.On the premise of ensuring safety, prompt the rear car.

If the rear car keeps its high beams on, or flashes its high beams frequently, you can use the brakes intermittently to alert you, but remember not to retaliate against the sudden braking of the rear car, which will endanger your own safety and the safety of others. Click here. If the car behind still doesn't pay attention to keeping the high beams on, then there is no need to give too many warnings.

3.Slow down and give way.

As the saying goes, "can't hide". If the other party is still with the high beams on, simply keep moving forward and let the other person pass, for your own safety, keep a good attitude at this time, don't hold a grudge, and be competitive.

Generally, in the case of good lighting conditions, there is basically no need to turn on the high beams, but in remote areas or on roads without street lights, there will be people who use the high beams indiscriminately, regardless of the distance between the opposite vehicle and the rear vehicle, the high beam will always be on. We should pay special attention to this.

Millions of car purchase subsidies.

1. Maintaining a safe distance is the premise.

When driving in the harsh sun, drivers should adjust their mentality, concentrate on driving, and be sure to keep an effective safety distance from the car in front of them, and do not follow the car too closely.

2. Wear sunglasses.

Wearing sunglasses when driving can not only resist the dazzling sunlight, fully filter ultraviolet rays, but also not affect visual judgment and ensure driving safety. The sunglasses on the market are divided into dyed lenses and polarizers, and it is best to wear polarized sunglasses when driving, because ordinary sunglasses simply dim the light and cannot filter and block harmful light. Polarized lenses, on the other hand, completely block glare caused by various factors such as scattering and reflection.

3. Do not place reflectors under the center console and windshield.

Paper driving passes or temporary parking cards are generally made of plastic products, which will reflect on the windshield when encountering sunlight, interfere with the driver's line of sight, and have certain potential safety hazards. Therefore, for items such as car licenses, if they obstruct the view, it is better to put them away first and take them out when needed.

You can wear glasses, you can put down the visor on it while driving, and you must be cautious and improve your judgment while driving.

In such a situation, we can get the car baffle down, or we can apply the car film, so that we can avoid the sun dazzling.

You can buy a pair of sunglasses to get a good solution, and you can also let yourself see the road ahead clearly without car accidents.

In summer, not only is the weather very hot, but the sun is also very harsh. Driving in this kind of weather is easy to dazzle the driver, which has a great impact on the driving safety of the car owner. So what should I do if the driving sun is too dazzling? Is there any way to avoid it?

1.Keep a safe distance.

At present, many vehicles have chrome trim strips on the front and rear bumpers. Although it looks beautiful, it is easily reflected in sunny weather, and its glare is not inferior to direct sunlight at all. So when encountering this kind of vehicle with chrome trim, the best way is to keep a sufficient safety distance, and at the same time adjust your mentality, concentrate on driving, and don't get too close to the car to avoid rear-end accidents.

2.There are no reflective items on the center console.

It is not recommended to place reflective items such as mineral water, mobile phones, glass products, and plastic certificates on the center console of the car. When exposed to sunlight, these items will reflect on the windshield and even the eyes of the human body, thus affecting the driver's vision, and there are certain safety hazards. Therefore, in order to avoid unnecessary dangers, it is best to put these things in the storage compartment or the bag that you carry with your Zheng Shen pants and take them out when you need them.

3.Use a visor.

When the vehicle is driving in the sun, the sun visor can be lowered to effectively block the impact of sunlight on the eyes. When the sun is still shining, the angle of the visor can be adjusted, but try not to set it at 90°, as the low position may affect the driver's observation of the signal lights.

4.Be careful when entering and exiting the tunnel.

In the summer, the intensity of the sun is high. Due to the large difference in light when entering and exiting the tunnel, it is difficult for the human eye to adapt to sudden changes in light. If the speed is too fast, it is difficult to see the situation inside the tunnel, which can easily lead to traffic accidents.

Therefore, when entering and exiting the tunnel, you must be cautious and slow, turn on your lights before entering, and watch out for vehicles and pedestrians on both sides.

5.Clean the dirt from the windshield in a timely manner.

The current air environment in this city is not very good. If you don't wash your car for a few days, a layer of dust will fall off your body. If dust and dirt are attached to the windshield, when direct sunlight is shining, it can seriously affect the driving vision.

So, clean up these dirty things in time before driving. The operation is very simple. Just spray the glass with water, turn on the wipers and clean up.

Millions of car purchase subsidies.