How don t the small lights in the Volkswagen Polo turn off automatically

Generally, there are two gears of interior lights, the first gear is always on, and the first gear is turned on and then the door is turned on and the door is turned off. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, there are three gears, if you keep the gear on, it will always be on, and you need to close the door on the door to close the door and the door will automatically turn off [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, it may be that the switch is broken, I hope mine can help you, if you don't understand anything, please continue to consult thank you. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Maybe the door light switch is broken, I hope it can help you, I wish you a happy life! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello The car door will close automatically after it is closed [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The switch has a setting. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, this depends on whether you hit the automatic transmission or not. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

How to turn on the polo lights:

Turn the low beam button on the left to the low beam position, turn on the low beam at this time, press the handle on the left side of the steering wheel, press down, this is the high beam, return to the position up, it is the low beam, and then up, the low beam and high beam alternately change and flash.

On the left side of the steering wheel, there is a disc that turns to the right, the first gear is the width, and the second gear is the headlights.

When the headlights are turned on, the low beam is the upward direction of the turn signal pole; The high beams are turn signal poles down, and the low beams are still on.

What lamp, you ask?

The low beam, "on the lower left side of the steering wheel, next to the door switch, is screwed up".

High beam, after turning on the low beam, push forward the switch handle fog lamp of the turn signal, after turning on the wide indicator light or low beam, pull the switch of the low beam outward, there are two gears, respectively front and rear fog lights.

In the lower left foot of the steering wheel, next to the door switch, I screw it.

On the left side of the steering wheel, there are cue buttons for each small light.

1. Parking lights and turn signals.

The vehicle needs to be ignited for light operation:

a. Turn right signal.

b. Left turn signal.

2. Alternating function of high and low beams.

c. The high beam is turned on, and the blue high beam on the dashboard is on at this time.

d. When the alternation of high and low beams is required, only the return rod of the dial cavity needs to be toggled to the position d.

3. Fog lamps. On, automatic headlights, low beams, width indicators.

Front and rear fog light switches on the steering wheel.

The bottom left position. The way to turn on the light is very simple, just rotate the knob to the corresponding position. When the auto button is on, it means that the automatic headlights are on at this time, and there is no need to manually adjust the headlights manually.

4. Headlamp cleaning.

Just turn on the headlights, and turn on the glass water at this time.

Switch, which sprays the headlights while spraying the glass. If you only want to clean the glass, turn off the lights and turn on the glass water switch.

5. Adaptive headlights.

Opening Method: Adjust to the auto position.

Adaptive headlights are also known as dynamically adjustable cornering lights. It intelligently adjusts the height of the lights according to the steering angle and the speed of the vehicle. When the steering angle exceeds a certain value, the adaptive headlights are switched on.

And when the speed does not exceed 70km h, it can work normally.

Some high-end models will also add light intensity to the headlight system.

The sensor will automatically switch the high beam to low beam when it detects the light of an oncoming vehicle at night to prevent it from dazzling other vehicles.

The reading light switch has three positions, the first is closed, the second is on when the door is opened, and the third is always on.

There are three modes of interior lights: on, off and door, the interior lights are always on is in ON mode, select OFF mode to turn off the lights, or it may be door mode, close the door, and the interior lights will go out.

The interior lights of some cars can be pressed down, and they can be turned on or off by pressing them, and many car lovers do not know this function, so you can try to see if the lights on the roof of your car are pressed to operate.

If the lights in the car are abnormally on, check the light switches, doors, and lights. Because interior lights are often used, most interior lights are generally not problematic.

For the lights to be always on, it should be that the lights are selected in the continuous mode or the door opening light mode, and then you only need to check the relevant settings. Generally, as long as the car is powered on, the interior lights will be on. Therefore, it is only necessary to check that the doors are closed and that the roof lights are set to the correct mode.

I am very happy to answer for you, dear, the reasons why the Volkswagen polo headlights cannot be turned off are as follows: 1. The headlights of the car cannot be turned off, which may be caused by the damage of the combination switch of the light, and the combination switch will not be able to turn off the headlights after the combination switch is damaged, and even other stools will be affected. In this case, the owner needs to go to a professional repair shop or 4S shop as soon as possible to repair or replace the combination switch of the headlights.

2. It may be that there is a fault in the control circuit of the headlight, and the more common fault is the circuit tie. After this kind of failure, the headlights may be used in a short period of time, but if they are not repaired for a long time, they may cause damage to the line, and the owner should go to the 4S shop as soon as possible to check the control line of the car headlights. 3. If the owner finds that the car owner locks the car or turns off the engine after the car headlights are still on, this may be due to the problem of setting, for example, some models may be set to automatically provide lighting for the car headlights after the car owner gets out of the car, and the car headlights will turn off by themselves after a period of time.

The Volkswagen Polo is a popular small model, but during use, we may encounter some problems, such as the maintenance indicator light is on. So, how do we solve this problem?

First of all, we need to understand the meaning of the maintenance reminder light. This light is a maintenance reminder function of the vehicle, when the vehicle has traveled a certain mileage, the light will turn on to remind the owner to carry out maintenance. If maintenance is not carried out in a timely manner, it may affect the performance and safety of the vehicle.

So, what should we do with the maintenance reminder light on? Here are some workarounds:

1.Maintenance: When the maintenance indicator light is on, it means that the vehicle needs to be maintained. We can understand the specific maintenance content and time according to the maintenance manual of the vehicle, and then go to the regular car maintenance stove base repair shop to enter the front line of maintenance.

2.Reset light: After some vehicles turn on the maintenance reminder light, it will automatically turn off after only maintenance. However, some vehicles require a manual reset of the lights. For details, please refer to the vehicle's maintenance manual.

3.Maintenance failure: If the maintenance indicator light is on, even after maintenance or reset light, it is still faintly lit, it may be that the vehicle is faulty. At this point, we need to go to the car repair shop for repairs.

To sum up, the Volkswagen Polo maintenance indicator light is on, and it needs to be maintained or repaired in time. When using the vehicle, we will regularly check the maintenance of the vehicle to ensure the performance and safety of the vehicle.

The Polo lights turn on: in the lower left corner of the dashboard, there is a knob switch. The low beam button turns to the low beam position, at this time the low beam is turned on, the handle on the left side of the steering wheel, press down, at this time it is the high beam, and the upward return is the near group morning light, and then the upper collapse of the Qingque, is the low beam, the high beam alternately changes and flashes.

Volkswagen's new polo light use: width indicator lamp: commonly known as small light, take polo as an example is to turn the light switch only clockwise one gear, at this time the front of the car small light and the rear of the difference is not wide light on, when the sky begins to darken but has not yet darkened when it opens, darker rainy weather or wind and sand days can also be turned on, the purpose is to make their car easy to be seen by other cars.

Low beam: commonly known as headlights, polo is to dial the light switch clockwise two gears, at this time, on the basis of the small lights, the low beam headlights in front of the car are on, which can illuminate the road surface in front of the car about ten meters, the illumination angle is low, and it will not shake to the opposite driver and pedestrians, it is recommended to use low beam in most cases at night. Open when it's dark, whether it's at night or in bad weather.

Car headlights, also known as car headlights, car LED daytime running lights, as the eyes of the car, are not only related to the external image of a car owner, but also closely related to the safe driving at night or in bad weather conditions, the use and maintenance of car lights can not be ignored.

Photo by Q&A) @2019

The Volkswagen Polo parking light is a light with a parking warning function.

Parking lights are an important lighting fixture imitated in the tail lighting system of automobiles, usually composed of white or yellow bulb fibers. As for the parking lights of the Volkswagen Polo model, white bulbs are used. Parking lights are mainly used to improve the night identification and warning effect of other vehicles and pedestrians, and ensure the safety of vehicle driving and parking.

Turning on your parking lights while parking allows other drivers to know your vehicle's location more clearly, thus avoiding unnecessary accidents.

In addition to the stop lights, the rear tail light system also includes marker lights, brake lights, reversing lights, turn signals and other lamps. These lamps and lanterns play an important role in vehicle driving, braking, turning, reversing and other beam occasions, and are a part that cannot be ignored to ensure driving safety.