Hikvision monitoring installation tutorial, Hikvision monitoring installation tutorial and configura

Hikvision monitoring installation method is as follows:

2. Double-click the Hikvision IVMS-4200 monitoring software installation package to enter the installation wizard, and then click Next directly, as shown below.

3. Check the terms of the acceptance license agreement, and then click Next, as shown below.

4. This is just a monitoring software, so only check the client here, and then you can modify the installation destination folder, and then click Next, as shown below.

5. This is just a hint of the installation wizard, here if you have no doubt about all the previous choices, you can directly click Install, as shown below.

6. Then there is the waiting time of the installation process, as shown in the figure below.

7. After the installation is over, the installation wizard will prompt whether to create a client desktop shortcut, which is checked by default here, and then the next step, as shown below.

8. Then there is the installation completion prompt of the installation wizard, click Finish, as shown below.

9. After that, you can see a shortcut to the software of the Hikvision IVMS-4200 monitoring software client on the desktop, as shown in the following figure.

10. Next, double-click to open Hikvision IVMS-4200 monitoring software, the first time it is launched, the client needs to create a superuser, as shown below.

11. You can create it at will, but you must remember the password, use the superusername of sqlserver here, and then set your own password, as shown in the figure below.

12. The computer port used by this client is 80, but in general, this port will be used by its program, and the client needs another free port, as shown in the following figure.

13. Port 9090 is used in the following figure, and when the port is generally configured, the port after 1000 needs to be configured, as shown in the following figure.

14. After the above configuration is configured, it will enter the client of Hikvision IVMS-4200 monitoring software, and the installation will be over, as shown in the figure below.

1. First install and debug the equipment, open the remote control software, and after opening the remote monitoring software, you can see the resolution displayed on the screen.

Yes, it can be adjusted, and that's the first step.

2. The initial password of monitoring it is 1234567, you can change the password yourself, after the modification is completed, if there is no accident, try not to change other parameters, and then ensure that all the previous steps are completed, just click Next.

3. Generally speaking, the first time we use it, we need to initialize our hard disk, that is, format, which is the operation of this step.

4. When the status becomes normal, you can record the video, which is the whole process of monitoring and debugging.

Hikvision monitoring installation tutorial and configuration are as follows:

Brand model: Hikvision.

System version: Hikvision.

Software version: Camera settings.

1. First of all, we need to connect the device, and then we need to connect our device according to the image below, and we need to ensure that in the next settings, the link should always be kept on it, which is the operation of this step.

2. When we need to modify the IP of the IP camera after the first step is completed, we can directly use the network cable to connect the IPC and the computer to modify, this is the operation of this step.

3. If our IP camera is default. To access the IPC, then we need to modify our PC into a section, which is the whole process of Hikvision monitoring installation.

4. Other items can be set to the above or default settings. Don't tick "Enable DHCP", after the above settings, click "Apply" in the bottom right corner of the screen, in "More Settings", set the relevant port number, if the IP is unstable, you can use Hikvision's domain, after the above settings, click "Apply" in the bottom right corner of the screen.

1.First, install and debug the equipment and open the remote control software. After opening the remote monitoring software, you can see that the resolution displayed on the screen can be adjusted. This is the first step.

2.The initial password to monitor it is 1234567, and you can change the password yourself. Once you're done, try not to change the other parameters if nothing else, and then make sure that the previous steps are all done, and click Next.

3.Generally speaking, when we use it for the first time, we need to initialize our hard drive, that is, format it. Here's how it works.

4.When the state becomes normal, you can record the video, which is the whole process of monitoring and debugging.

Things to look out for:

If it is a monitoring project in large places such as residential areas, streets, and shopping malls. After the completion of the project, all equipment needs to be started for trial operation, including the commissioning of the monitoring matrix, monitoring host, switch router, optical fiber network, monitoring PTZ, camera angle, integrated wiring, storage, etc.

In general, the commissioning and testing cycle of a large project can be as long as 3 to 6 months as needed. Commissioning of a monitoring system is a very complex step that requires relevant know-how and technology.

The installation and commissioning methods are as follows:

Operating tool: vivo X9

Operating system: Funtouch OS

Software: Hikvision Camera Yoosee

1. Open Yoosee directly, and then select the Smart Online option in the position shown in the figure, see the figure below, go to the steps below.

2. After performing the above operations, the page needs the wifi name and password to connect, see the figure below, go to the steps below.

3. After performing the above operations, the connection is successful, please continue to wait for the process until it is completed, see the figure below, go to the steps below.

4. After performing the above operations, you will see the corresponding result, and the camera will be connected successfully, see the figure below. In this way, the problem is solved.

Summary. 1. Install the host 1Prepare to install the device:

IP cameras, network cables, network switches, hard disk recorders, determine the installation location, and ensure that the installation location meets the installation requirements; 2.Install the IP camera according to the installation location to ensure that the camera can work normally; 3.Install the DVR, and network the IP camera to the DVR through the network cable; 4.

After the installation is completed, connect the DVR and the network switch, configure the network, and set it up according to the installation requirements; 2. Install the client 1Prepare the device for installation: network monitoring client software; 2.

Install the client software, and after completing the installation, set the client login information; 3.Open the client, log in to the system, and enter the IP address of the DVR; 4.Set the parameters of the client to view the camera and set the camera; 5.

Complete the client setup and install the Hikvision monitoring system.

Hikvision monitoring installation tutorial.

1. Install the host 1Prepare the installation equipment: IP cameras, network cables, network switches, hard disk recorders, determine the installation location, and ensure that the installation location of Bitan meets the installation requirements; 2.

Install the IP camera according to the installation location to ensure that the camera can work normally;

1. Install the host 1Prepare the installation equipment: IP cameras, network cables, network switches, hard disk recorders, determine the installation location, and ensure that the installation location meets the installation requirements; 2.

Install the IP camera according to the installation location to ensure that the camera can work normally; 3.Install the DVR, and network the IP camera to the DVR through the network cable; 4.After the installation is completed, the buried sail is connected to the DVR and the network switch, the network configuration is carried out, and the settings are set according to the installation requirements; Second, the trembling installation client 1

Prepare the device for installation: network monitoring client software; 2.Install the client software, and after completing the installation, set the client login information; 3.

Open the client, log in to the system, and enter the IP address of the DVR; 4.Set the parameters of the client to view the camera and set the camera; 5.Complete the client setup and install the Haiwan Hail Convision monitoring system.