Selected to chase 40 points AO organization divides humeral shaft fractures into three categories: A

A simple fracture, generally only two sections, rice with fragmented bones. A1 refers to ordinary spiral fractures, A2 refers to the angle between the fracture line and the horizontal direction is greater than 30 degrees, and A3 refers to the angle between the fracture line and the horizontal plane is less than 30 degrees.

b has a butterfly-shaped bone block, but if you remove the butterfly bone block, one of the remaining two ends can be directly combined together (the expression is worse, I hope you understand). B1 is a spiral fracture + bone fragment. B2 is wedge-shaped, and B3 is two or more bone pieces [in fact, after the two ends are aligned, there will be a defective groove, which can be filled with bone pieces.

However, there will be no change in the overall length of the bone. 】

cComplex fractures. In other words, if the bone fragments are removed, the length of the bone will be shortened. C1 is two butterfly-shaped bones, C2 is broken into 3 pieces, and C3 is broken to a mess [what is this......Poor expression skills ......】

There is a provenance meter. It's hard to find ...... online

Humeral surgery is the humeral shaft below 1 cm from the distal neck to more than 2 cm above the humeral condyle. Humeral shaft fractures are more common in young adults, with a predominantly central fracture, followed by the lower part, and the least in the upper part. The middle and lower 1 3 fractures are prone to radial nerve injury, and the lower 1 3 fractures are prone to nonunion.

Can't texture it.,Give a**:.

Look at the fourth picture from top to bottom - it is the ABC classification of diaphyseal fractures, you should understand it after reading it.

Asimple fractures include three subtypes: A1 spiral simple fracture, A2 oblique simple fracture (30°) and A3 tranverse simple fracture (<30°).

There are three subtypes of wedge fractures: BL spiral wedge fracture, B2 curved wedge fracture and B3 fragment wedge fracture.

Complex fractures include three subtypes: CL spiral complex fractures, C2 multi-segment complex fractures, and C3 irregular complex fractures.

Class A addresses.

Class B addresses, Class C addresses.

IP address type.

When the Internet was first designed, each IP address included two identifiers (IDs), namely the network ID and the host ID, in order to facilitate addressing and hierarchical construction of the network. All hosts on the same physical network use the same network ID, and a host on the network (including workstations, servers, and routers on the network) has a host ID corresponding to it. IP addresses are divided into 5 types according to network IDs: Class A address, Class B address, Class C address, Class D address, and Class E address.

1 Class A IP address.

A Class A IP address consists of a 1-byte network address and a 3-byte host address, with the highest bit of the network address must be "0" and the address range is from to. There are 126 Class A networks available, each capable of accommodating more than 100 million hosts.

2 Class B IP addresses.

A Class B IP address consists of a 2-byte network address and a 2-byte host address, with the highest digit of the network address having to be "10" and the address range from to to. There are 16,382 Class B networks available, each capable of accommodating more than 60,000 hosts.

3 Class C IP addresses.

A Class C IP address consists of a 3-byte network address and a 1-byte host address, and the highest bit of the network address must be "110". There are more than 2.09 million networks ranging from to class, and each network can accommodate 254 hosts.

4 Class D addresses are used for multicasting.

The first byte of a Class D IP address starts with "LL0", which is a specifically reserved address. It does not point to a specific network, and is currently used for multicasting. A multicast address is used to address a group of computers at a time, and it identifies a group of computers that share the same protocol.

5 Class E IP addresses.

Start with "llll0" and reserve it for future use.

The all-zero ("0 0 0 0") address corresponds to the current host. The IP address of all "1" ("255 255 255 255") is the broadcast address of the current subnet.

Category A generally belongs to comprehensive management positions at or above the provincial level.

Category B belongs to positions above the prefecture and municipal level.

Category C positions below the county level.

Civil servants are generally divided into general management posts and administrative law enforcement posts.

When you apply for the exam, you will be automatically assigned corresponding test questions according to different positions.

The unit you are reapplying for is noted.

Define the categories to be examined. Each unit has a different category. There is a dao on the job list, you pay attention to it.

The examination subjects of Category A are "Administrative Aptitude Test" and "Essay", the examination subjects of Category B are "Administrative Aptitude Test" and "Public Basic Knowledge", and the examination subjects of Category C are "Administrative Aptitude Test" and "Professional Knowledge" (generally accounting and computer science).

Northern Jiangsu belongs to category A, and southern Jiangsu is category B, you can refer to the public security system position list in the past two years.

The research and drafting of laws and regulations, plans, etc., and the guidance, supervision and inspection of the implementation of policies, laws, regulations, and subordinate plans, as well as the positions engaged in the comprehensive management of the internal affairs of the organs.

Category B positions mainly include: positions in state organs and related institutions that are engaged in professional and technical work within the organs and provide professional and technical support for the business work of the organs; Directly apply the specific provisions to administrative law enforcement positions in citizens, legal persons and other organizations.

Category C positions are specifically for township-level positions in the recruitment examination of Jiangsu Province.

The subjects of the Category A examination are: "Public Basic Knowledge" Paper A, "Administrative Vocational Aptitude Test" Paper A and "Essay";

The subjects of the Category B examination are: "Public Basic Knowledge" Paper B and "Administrative Vocational Aptitude Test" Volume B;

The subjects of the Category C examination are: "Public Basic Knowledge" Paper C and "Administrative Vocational Aptitude Test" Paper C.

For legal professional positions in the provincial courts and procuratorate systems, additional legal professional subjects will be examined.

The review materials are divided into three different categories, and the review content should be different.

There are many C-class positions, and there are many relatively people, but for a certain position, the competitiveness of the general A-class exam is relatively large!

Comprehensive management at or above the county level in Class A cities, grass-roots administrative law enforcement below the county level in Class B, and professional and technical positions in Class C.

Jiangsu text training has the answer:

According to different positions, it is divided into management (category A), law enforcement (category B) and grassroots level (category C). The province conducts unified interview examinations according to different categories.

Generally, the interview in Jiangsu Province is divided into 2 days, with 1 set of questions a day.

Hello, Huatu Education is at your service.

For information on interview questions for civil servants in Jiangsu Province, please go to Huatu to view, where there is a detailed introduction. There is a teacher's training, and the past questions and hot analysis are also collected.

Jiangsu Provincial Civil Servant Interview:

After the written examination of public subjects is completed, the Organization Department of the Provincial Party Committee, the Provincial Department of Human Resources and Social Security, and the Provincial Civil Service Bureau will study and determine the minimum qualified score line for various positions.

The competent departments for civil servants at all levels shall determine the candidates to participate in the interview in proportion to three times the number of people to be hired from the highest score to the lowest score.

Before the interview, the recruiting unit must review the qualifications of the interviewees. The list of persons who have passed the qualification review shall be published by the competent department of civil servants at or above the municipal level in the relevant **. If the re-examination is unqualified, the interview qualification will be cancelled, and the candidates for interview will be replaced in order from the highest score to the lowest score among the qualified candidates in the written examination for the same position.

There is no passing line for the interview score, but the position is not competitive, and the candidate's interview score reaches 60 points. The results of the interview will be notified to the candidates on the spot by the examiner.

If you have any questions, please feel free to ask questions to Huatu Education Enterprise.

Civil servants in Jiangsu Province are divided into three categories of ABC according to the application category, and the written test papers are different, but the interview is unified across the province.

Jiangsu Province civil servant interview questions are divided into three categories: A, B, and C. Hope it helps.

The examination consists of a written test (public subjects, professional subjects) and an interview. The written examination of public subjects is divided into three categories: A, B, and C, and the written examination of public subjects is divided into three categories: A, B, and C.

The Category A examination consists of three subjects: "Public Basic Knowledge" Paper A, "Administrative Vocational Aptitude Test" Paper A and "Essay";

The Category B examination consists of two subjects: "Public Basic Knowledge" Paper B and "Administrative Vocational Aptitude Test" Volume B;

The Category C examination consists of two subjects: Paper C of "Public Basic Knowledge" and "Volume C of Administrative Vocational Aptitude Test".

You can review according to the position you choose, and if you can determine which type of position it is, you can only review that category.

Hello, Zhonggong Education is at your service.

The interview questions for civil servants in Jiangsu Province are unified, and there are no three categories: A, B, and C.

There are three types of interviews:

Category A exams are three subjects: "Public Basic Knowledge" A, "Administrative Vocational Ability Test" A and "Essay";

Category B exams are two subjects: "Public Basic Knowledge" B and "Administrative Vocational Aptitude Test" B;

Category C exams are two subjects: "Public Basic Knowledge" C and "Administrative Vocational Aptitude Test" C.

If you have any questions, please feel free to ask questions from Zhonggong Education Enterprises.

Why does C contain at least two sub-level hubs inside? This is because the standard divergence, must C contains a third type of buying and selling point for B, that is, C must first end the center B, if C does not have a third type of buying and selling point, it can only be regarded as the center of B pivot **, so it is possible that this trend is expanded into A + A, so that there is an essential difference with the trend, let alone the divergence, because there is no trend, there is no divergence. Therefore, in order to consider divergence, it is necessary for the third type of buying and selling point to appear within C to confirm that A+A+B+B+C is a trend, and the confirmation of the third type of buying and selling point must be the departure of the secondary level and the pullback of the secondary level not into the central range.

There are three types of sub-levels, **, **, consolidation, and two sub-levels, consolidation + consolidation, at least two middle structures, and a trend of a sub-level type requires at least two sub-level centers, and the above C internal at least two sub-level centers, which refers to the sub-level consolidation + consolidation.

And the chart you drew above is wrong, this is just a sub-level trend, and consolidation + consolidation, the sub-level generally shows a central expansion.

I don't think you're a triple buy, because it's not a sub-low. It's just a ** of the same level. I'll re-add some instructions, if there is something wrong, please advise, thank you!