-
Anonymous users2024-02-15Meaning of motorcycle tires 350 — 10 sizes:
350 refers to the cross-sectional width of the tire in inches.
10 refers to the diameter of the tire's hub, in inches.
The default flat ratio for this tire.
is 100%, so the cross-sectional height of the tire is also inches. (Flattening rate = cross-sectional height cross-sectional width x 100%).) ）
Motorcycle tire specifications.
The marking properties are basically the same as those of car tires, but there are some special marking attributes, so let's first introduce the specifications of which parts of the tire are marked by these numbers.
The basic specifications are marked with:
The outer diameter of the tire.
The total width of the tire (including the width of the tread, at the widest point of the tire), the height of the tire (the length from the bead of the bead to the tire**), and the rim. Diameter, etc.
Based on these four basic data, the following specification markings will appear on the tire: (total width of the tire) (flat ratio of tire: ratio between tire height and total width) - rim diameter (example of table notation:
Please refer to the figure below), these data are not labeled to a fine 1mm unit, but only a rough description.
First of all, for example: 110 70R 17 H54110: is the width of the tire (110mm);
70: The tire height is 70% of the width (flat ratio 90);
r means that it is a radial tire;
17 indicates the diameter of the rim (17 inches);
h: Indicates the ultimate speed of 210km h.
54: Load capacity 212kg.
Another example is the common Haojue Suzuki EN125-2A modified rear tire: 110 90-18110 is the width of the tire (110mm);
The tire height is 90% of the width, which is 99mm;
The diameter of the hub is 18 inches, which is 46cm.
-
Anonymous users2024-02-14The content is as follows: called inch tires. That is, the size of the tire is measured in imperial length units.
Meaning: 1 The width of the tire is inches. 2. The height-to-width ratio of the tire is 100%, that is, the height is also inches (the height is the difference between the radius mentioned above.
10 means that the rim diameter of the tire is 10 inches.
-
Anonymous users2024-02-13300 refers to the width of the tire, 10 refers to the rim diameter (that is, the inner diameter of the tire), the unit is inches, this kind of tire is generally more commonly used on small scooters.
-
Anonymous users2024-02-12ScootersThe width of the tires is inches, about centimetersRimsThe diameter (tire inner diameter) is 10 inches.
The types of tires are: the international standard tire code, which indicates the cross-sectional width and aspect ratio in millimeters.
percentages. After that: tire type code, rim diameter (inches), load index (allowable load quality code), allowable speed code.
For example: 175 70r 14 77h in 175 represents the tire width is 175mm, 70 means that the flat ratio of the tire section is 70%, that is, the height of the section is 70% of the width, the rim diameter is 14 inches, the load index is 77, and the allowable speed is H level.
Scooters are basically continuously variable gear.
Self-rental dispersion clutch, the mind hand is similar to the Moulin electric car, there is no gear design, after starting, just twist the throttle and go, the throttle will automatically and gradually slow down until the stop, and the scooter.
The wheels are smaller than other cars, and the vast majority of the transmission parts are belt driven.
This is what is commonly referred to as ** motorcycles.
Pedals are those with a wide pedal between the saddle and handlebars, so that you can ride on it comfortably as if you were sitting on a chair, rather than straddle it like other bikes.
-
Anonymous users2024-02-11Tire specifications mean: 300 refers to the width of the tire, 10 refers to the rim diameter (that is, the inner diameter of the tire), this kind of tire is generally commonly used on small scooters.
10 is a motorcycle tire, 14* is an electric vehicle tire, but the logo of the two is different.
The thickness of the 10 tread is larger, and the 14* tire wall is thinner. However, the two can be used interchangeably because the inner diameter is the same.
3. The angle and pattern of the tread are different.
The diameter of the inner tube of the tire is 3 inches, and the diameter of the outer ring is 10 inches; Among them, 300-10 of 300 refers to the width of the tire, 10 refers to the inner diameter of the tire, and "- represents the bias tire. The unit is inches, and the tread thickness is larger. 14* is a special tire for electric vehicles, the tire wall is thinner, of which, 14 is the outer diameter, unit:
inches, is the width of the section. 1 inch .
Tire specifications are often expressed by a set of numbers, the former number indicates the tire section width, and the latter indicates the rim diameter, measured in inches. For example, 165 70R14 means radial tires with a tire width of 165 mm, a flatness rate of 70, and a rim diameter of 14 inches. For example, 165 70R14 means radial tires with a tire width of 165 mm, a flatness rate of 70, and a rim diameter of 14 inches.
Some tires also contain other letters or symbols, which have special meanings: "X" means high-pressure tires; "C" indicates strengthened; "b"indicates a bias tire; "One" means low-pressure tires.
-
Anonymous users2024-02-10Not the same as the land, the 10-inch steel rim can be installed, but the general 909010 is relatively narrow, the 35010 is relatively wide, the general 909010 is equipped with the front wheel, and the 35010 is equipped with the rear wheel.
**Motorcycle tires and 90 90-10 tires are similar in size, the same inner diameter, interchangeable, but not exactly the same, relatively speaking, 90 90-10 tires are slightly flattened, the outer diameter is slightly smaller, and it looks slightly narrower. Late matching.
-
Anonymous users2024-02-09The first 90 indicates the height of the tire, and the second 90 indicates the width of the tire—10 is the inner diameter of 10 inches 1 inch = mm.
-
Anonymous users2024-02-08It is called an imperial wheel white tire. That is, the gauge of the tire is measured in the imperial length unit. The meaning of the dao:1 tire.
The back width is inches. 2. The height of the tire is 100%, that is, the height is also inches (the height is the difference between the radius mentioned upstairs).
10 means that the rim diameter of the tire is 10 inches.
90 90---10 is called metric tires. i.e. "--is preceded by metric units of length. The front 90 is 90 mm wide, and the rear 90 is 90% of the height-width ratio, that is, the height is 90% of the width, do your own math.
10 means the same as above.
There is also a kind of tire that is "American-specified", that is, the United States regulations, there are very few in China, and there are almost no civilians, so there is no need to understand.
There is no Michelin sold in domestic motorcycle tire stores, ** more expensive, most of them are used for sports cars, and there are very few ordinary motorcycles! It may be sold at a general motorcycle tuning shop! Fully imported!
You see what brand of tires it is. If it's a Kenda. Or Zhengxin. Sakura 30,000 km no problem.
Hello, I'm a person who hasn't read a book, and then the first time I heard about your kind of problem, and then I think this two-wheeled motorcycle tires, about a few years need to be replaced, in fact, it depends on how you ride, if you say you, ride every day in this, well, very poor, ride on the road then too, pay it back early, if you say you, 700 million a year twice like me, well, can't ride, um, every time is to push the motorcycle back, in that case, I don't have to change it for ten years.
The size of A4 paper is 210mm 297mm.
When you set the resolution to 72 pixels inches, the pixels of an image of the size of A4 paper are 595 842, and when you set the resolution to 150 pixels inches, the pixels of an image of the size of A4 paper are 1240 1754. >>>More
1. Cruz. 2. Fox. 3. Kia K3 Kia Bora.
5. Suteng. 6. Jetta. 7. Changan CS75 (SUV). >>>More