Volkswagen Touron burns engine oil can only be overhauled, and there is no other way to improve?

Updated on Car 2024-08-11
4 answers
  1. Anonymous users2024-02-15

    It is still relatively common for Touron to burn engine oil, and the only way to completely solve it is to overhaul, but it is very troublesome, and it is not low, it is not worth it at all, it is better to continue with engine oil. I am now using imported GT Magic Red, the quality of this oil is very good, it is the base oil of the four types of PAO, the quality is very good, even if there is a case of burning engine oil, it will not produce a lot of carbon deposits, it will not affect the power of the engine, the power improvement is also good, the car is very smooth, as long as the liquid level is checked at any time, it is not too low, and there is no problem with normal driving.

  2. Anonymous users2024-02-14

    Does Volkswagen Touron burn engine oil

    the formation process of burning engine oil in automobiles;

    Step 1. The long-term unclean oil circuit of the car leads to the increase of oil rubber, hand and hand impurities, moisture, poor combustion, and excessive carbon deposits.

    Step 2. Excessive carbon deposition leads to a significant decrease in engine condition and greater carbon deposition, and eventually piston ring stagnation and related parts aging.

    Step 3. Slight oil burns begin to appear.

    Step 4. Because burning engine oil produces greater carbon deposits.

    Step 6. The trunk went from having one liter of oil ready to being ready for two or three liters of oil at any time.

    Step 7. The overhaul was too expensive, and it was delayed, until in the end, the engine was overhauled with a burst cylinder.

    How often does burning oil occur

    There is no warning of burning engine oil, and it is said that it burns Bilingna, and the illness is like a mountain. Moreover, the new car has not burned engine oil for tens of thousands of kilometers, and once it starts to burn engine oil, it will become very serious in half a year and half a year. I don't think you want to go through such a process, but it has happened that the engine has been revitalized by oil, and it has become a serious oil burn, so it is recommended to check it first, and don't rush to deal with the engine problem blindly.

    Burning engine oil will lead to shaking, weakness, high fuel consumption and other possible phenomena, these are caused by burning engine oil, don't be in a hurry to deal with small phenomena, first deal with the problem of burning engine oil on the main line.

    Workaround:

    Don't worry about burning engine oil, prescribe the right medicine, as long as the carbon deposition problem of the piston snap ring is solved, there is no need for overhaul, and you can directly repair the oil burning problem. Before burning engine oil, through many understandings, the vehicle was completely solved by using the method of dismantling and non-destructive repair of burning engine oil by Siyoupu.

    The problem of adding one liter of engine oil for 1,000 kilometers, after fixing, there is no need to add oil for 5,000 kilometers. At the same time, it can clean the carbon deposits and colloidal impurities in the oil circuit, and the plugging of the fuel injector and the carbon deposits in the combustion chamber can be cleaned at one time.

    As long as you use the general burning oil repair agent for 4 times in a row and drive more, you can clean the carbon deposits on the top of the piston and release the piston ring.

    Burning oil and overhauling the engine is a pit.

  3. Anonymous users2024-02-13

    Why does Volkswagen burn engine oil.

    In order to protect the engine and prolong the engine life, Volkswagen is designed to reduce the frictional resistance between the piston ring and the cylinder wall, and an oil film will be formed on the cylinder wall, and part of the oil film will be burned off with the gas burned at high temperature, so the oil loss is more than the same period last year.

    1. Volkswagen's processing technology for engine cylinders, the engine cylinder wall is shown as a mesh shape under the microscope, each small mesh is a "small oil depot" for storing oil, and the piston has better lubrication performance than the flat cylinder wall when running up and down in the cylinder, which also minimizes the wear between the piston ring and the cylinder wall.

    2. The toughness of the piston ring of Volkswagen is better, and the degree of tension is weaker than that of Japanese cars, simply put, it is strong, but the elasticity is small, and this matching naturally reduces the wear caused by the piston ring running up and down on the cylinder wall, so Volkswagen has driven hundreds of thousands of kilometers to measure the wear of the cylinder wall of its engine of the rolling machine, which is much smaller than other car series, and the engine can still maintain good working condition.

    3. The engine is like the heart of the car, in the final analysis, the engine burns oil or the piston ring has a problem, under normal circumstances, there will be oil loss every 1000km, if it exceeds too much, it is possible to burn oil. If there is a problem with the sealing of the piston ring, the oil will follow the movement of the piston and secretly drill into the combustion chamber to participate in the combustion, and then the oil will be burned.

    4. In order to prolong the service life of the engine, Volkswagen manufacturers cause engine oil to be burned.

    Precautionary measures for burning engine oil:

    1. Use high-quality engine oil

    Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the thinning of the oil film, which is easier to enter the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

    2. Pay attention to the cleanliness of the fuel circuit

    Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., all of which are directly or indirectly related to the formation of carbon deposits, so keeping the fuel circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality PNF fuel additives.

  4. Anonymous users2024-02-12

    Volkswagen's cars burn gas all the time, and so does the Volkswagen Touron, but it won't burn gas very badly. ""Combustion oil" refers to the oil entering the combustion chamber of the engine and participating in combustion with the mixture. The phenomenon of "burning oil" in the vehicle will cause the vehicle oxygen sensor to be damaged too quickly, resulting in increased carbon deposition in the combustion chamber, unstable idling, poor acceleration, increased fuel consumption, excessive exhaust exhaust and other adverse consequences.

    Although the problem of burning engine oil is more cumbersome to solve, it can be prevented by certain measures in the early stage:

    1.Use high-quality engine oil: engine oil is easy to corrode and age when exposed to high temperature for a long time, resulting in a thinner oil film and easier to run to the combustion chamber to participate in combustion. Therefore, using a high-quality engine oil can greatly delay this phenomenon.

    2.Pay attention to the cleanliness of the fuel circuit: carbon deposits will inevitably occur during the combustion process, which is the root cause of some car failures, such as the aging of valve seals, the widening of the piston cylinder wall clearance, etc., which are directly or indirectly related to the formation of carbon deposits.

    Therefore, keeping the fuel circuit clean can go a long way in preventing fuel combustion. Of course, this requires high-quality fuel additives.

    3.External force: As mentioned above, the cleanliness of the fuel circuit and the degree of anti-aging of the engine oil basically determine the key to preventing oil combustion.

    Considering the current relationship between domestic oil products, to achieve this goal, it is necessary to use high-quality engine oil and fuel additives, which is also the key to achieving maintenance-free engine oil combustion.

    Millions of car purchase subsidies.

Related questions
2 answers2024-08-11

At present, the only way to solve the problem of burning engine oil is overhaul, it is indeed more troublesome, I hesitated for a long time before and finally did not do it, but the maintenance was replaced by imported GT engine oil, four types of PAO base oil, the quality is higher than the general three types of fully synthetic engine oil, less carbon deposition, the power of the engine is better to improve and protect the engine, the effect of maintenance is good, although the car is still burning oil, but the power of the engine is not much affected, and there is no problem with normal driving. Bring an extra liter of engine oil with the car, and add less to it.

9 answers2024-08-11

Tourang is indeed a case of burning engine oil, I burned 16 models, went to the 4S shop is to say let me overhaul, not enough cost is too high, I don't feel very cost-effective to get it, now it is continued with engine oil, using imported GT engine oil, the effect is still good, the oil quality is good, will not produce any carbon deposits, the power is similar to the oil that was not burned before, and there is no problem with the engine, although it is still the same burning oil, not enough car to drive no problem.

8 answers2024-08-11

Hello, if you want to solve the problem, you have to change the piston ring, you have to disassemble the machine! Do regular maintenance, add some if you are missing, there is no way to bring turbocharging!

12 answers2024-08-11

The main reason for burning engine oilIn two aspects, one is that there is a problem with the accessories, the waste valve, the valve oil seal, the cylinder is pulled in the cylinder, and the cylinder pressure is insufficient. The second is that the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the oil service life is too long, and the piston ring is stuck, and the more common situation is that the piston ring is stuck. Stagnation starts from the oil circuit, the oil bears the temperature at 110 degrees, and the high temperature caused by the long-term unclean oil circuit makes the oil at a temperature of 120 degrees or higher for a long time, so that the oil will fail in advance, the small hole of the oil ring is very small, and the oil inside will be dried and scabbed for a long time, and a cylinder stuck is a liter of oil for 5000 kilometers, at this time, the working conditions of other cylinders will also begin to be bad, and soon the 4 cylinders are stuck, and it will become a liter of oil for 1000 kilometers or even hundreds of kilometers. >>>More

6 answers2024-08-11

Volkswagen cars essentially burn engine oil, but changing a waste gas valve can solve the problem of not burning engine oil for 10,000 kilometers! This body is above the valve chamber cover. Round.