House heating is very important, many people when decorating, why strongly reject the floor heating

Introduction: Some people install heating equipment after the house is renovated. The weather is relatively cold in winter, and with heating equipment, even if you wear short sleeves at home, it is actually very warm.

Today, I will tell you that house heating is very important, why do many people strongly refuse to design floor heating when decorating? <>

I would like to tell you that the reason why people strongly reject the design of floor heating is because if there is a problem with floor heating, it is very difficult to repair. The installation of underfloor heating is different from radiators, because underfloor heating is directly laid in the ground, and then the construction is carried out. I would like to tell you that although this method is very convenient when installing and does not take up space in the home, it is difficult to repair it once there is a problem.

What I want to tell you is that if there are conditions in the home, it is recommended to install radiators, because radiators are still easier to maintain than floor heating. The role of floor heating is to achieve the effect of heating water by heating the pipe, and the floor heating is almost every room, if it is said for a long time, then the water pipe will have a certain impact, and at this time it will not be able to ensure the comprehensiveness of the heating will be a problem. Underfloor heating must be maintained over a long period of time, so that the pipes do not rust.

It is not recommended to use floor heating when decorating, because if the floor heating is used for a long time, there will be a certain amount of bacteria residue in the pipes, which is also very bad for people's health. If you feel that it is too cold in winter, it is recommended to install radiators at home, so that the effect is better than floor heating, sometimes there is air conditioning in the home, it is recommended to turn on the air conditioning in winter is also a very good choice, there is no need to install floor heating. Installing underfloor heating for a long time will also affect people's bodies.

Because floor heating will cause many furniture to be affected, will lead to deformation, not all places are suitable for installation, some places are not able to install floor heating, the cost of floor heating is more expensive.

It is particularly impractical, and there will be water leaks in life, and there will be some unwarm situations. So now many people will not choose floor heating when decorating.

It's because many people think that this ** is particularly expensive, but the final heating effect is not very good, so people are more repulsed.

Because many people think that the design of floor heating is chicken, floor heating does not have any temperature, and they also feel that floor heating can not help, and feel that floor heating is a waste of money, so they will reject such a design.

After many years of use, the home will not become particularly warm, and sometimes there will be some water leakage.

Because maintenance is more difficult, it is also very bad for the body, there is a problem with the design, and it may not be so warm.

Many people live in the north and choose to install heating in winter. As one of the more popular heating methods, floor heating occupies a large share in northern households. However, when decorating, many people will strongly reject the underfloor heating design.

So why is that? Let's analyze it for you.

The thermal insulation of floor heating is mainly manifested in two aspects: first, floor heating can play a role in regulating indoor temperature. The second is that the interior of the floor heating can form a good convection effect.

The heat in underfloor heating can be quickly conducted into the indoor space through various covering layers such as walls, floors, ceilings, floors, etc. Underfloor heating can increase indoor heat absorption and reduce heat loss. If you want to control the indoor temperature with underfloor heating, you need to use materials that are more insulating.

For example, it is better to use materials such as polyurethane materials, thermal insulation boards, and insulating glass. At the same time, it should also be noted that the floor heating material must have good thermal insulation performance.

Since the underfloor heating is laid under the ground, there is no sanitary dead end in the ground. Because the floor is not completely covered with air, the floor will be drier. And the floor will become dry after long-term use.

If a carpet or other cleaning tool is placed on the floor, the carpet will accumulate and become very difficult to clean due to long-term uncleaning.

Although underfloor heating can provide great benefits to our physical health, we still need to pay attention to some problems when using underfloor heating. First of all, we should pay attention to the following points when using floor heating: floor heating should ensure a certain heat dissipation effect.

Because when we use underfloor heating, the temperature of our ground rises. If the ground temperature is relatively high at this time, we may feel uncomfortable, and at this time we will choose to open the doors and windows to dissipate heat. Secondly, floor heating may produce some pollution when used.

Because underfloor heating is central heating, we use hot water to enter the ground through pipes, and if we use unhygienic hot water for heating, these hot water is likely to cause discomfort to the human body.

Since the floor heating needs to be laid on the ground during construction, a large amount of cement and sand may be used during the construction process, resulting in the long-term heating of the ground. And these cements and sand also have a certain service life. If the floor is used for too long, it will have the problem of aging.

In addition, the floor tiles need to be replaced regularly when the floor is laid, so the service life of the flooring material is relatively short. Floor heating material is a kind of insulation material, heating composite materials and other building materials, is a new type of building material between metal and plastic with high thermal conductivity and high environmental performance. Floor heating has a good thermal insulation effect and environmental performance!

The underfloor heating pipes are buried in the ground, and a layer of cement is laid around the perimeter. The cost of maintenance is high, and the heating effect will be greatly reduced after a few years of use of floor heating.

Because the floor heating is broken or malfunctioning, it is very difficult to maintain and repair, so it will be reluctant to install floor heating.

Personally, I feel that most families in the north are now underfloor heating, so that the whole family is heated evenly, and no room is cold, and no one refuses.

Because it costs a lot of money to install floor heating, and the cost is very high in the later stage, it is also very troublesome to renovate.

Floor heating is more common in high-rise buildings, what should be paid attention to when designing floor heating?

1.Floor heating has high requirements for comfort, energy saving and decoration. In the whole system, the position of the controller directly affects whether the system starts or stops at the most suitable time, and whether it affects the overall decoration effect.

The general temperature control position follows the following principles: arranged side by side with the light switch in the position; It cannot be set in direct sunlight or tuyere; It cannot be set in a location with a heat or cold source; Whether the power can meet the power requirements: Since floor heating is a high-power load, when designing floor heating, the load capacity of the household power supply should be checked first.

If the load capacity of household meters and wires is insufficient, the design should be changed or a load sharing device should be installed.

2.The design of the main flow rate of the floor heating coil should meet the requirements of the minimum water flow rate of the floor heating coil. If the water flow is only verified based on the heating load and the temperature difference between the supply and return water, it may cause air congestion and no heat.

Since insufficient flow can disrupt the system circulation, the design needs to achieve a minimum water flow rate of the underfloor heating coil to ensure the heating effect in the later stage. When designing the floor thermal storage layer, the reasonable thickness of the thermal storage layer should be determined according to the purpose and use rules of the heating room and the need to determine the thermal storage layer, and its influence on the floor height and structure should be properly considered when designing the building structure. According to the requirements of HVAC, it is best to control the length of each floor heating pipe within 90 meters for independent heating, and the floor heating pipe of type 20 should not exceed 120 meters.

3.In the same room, when laying the electric floor heating system, the location of other facilities such as doors, windows and furniture should also be considered, and the electric floor heating products should be reasonably distributed so that the heat can be dissipated most effectively. When laying the insulation layer, the four corners of the wall and the noisy ground should be kept warm to avoid heat exchange between the wall and the outside, increase heat loss, and increase operating costs.

For houses or villas with low utilization, the increased heat loss caused by heat transfer between households should be considered. Therefore, the wall between two adjacent residents should be insulated to prevent heat transfer between residents. The required wiring for underfloor heating should be calculated based on factors such as heating area, room type division, pipe size and length.

No more, no less, reasonable.

It is necessary to pay attention to the distance between the coils, the length of the coil, the design of the flow rate, the requirements of the water flow speed, and the water circulation system.

It should be grouped, and there should be a few more groups, which can be closed when it is hot in the later stage, and put more in the bedroom and bathroom, pay attention to the problem of water inlet and water change, and ask in advance if there is a problem of repairing Zheng Nianfu Dong Cong Kaina.

When designing a computer, a number of sheds must pay attention to the thermal insulation performance of the floor material, and judge that the effect of heat energy should also be paid attention to. You should also pay attention not to spend too much money on the design of floor heating, and you should also pay attention to the overall cost performance, and you should pay attention to all-round considerations.

We must pay attention to the problem of shouting load per mu of heat negative shed, and also pay attention to the heat source of the hall, and calculate every link in advance. It is necessary to pay attention to the chain field problem of the interface, and also divide the area reasonably.

In terms of aesthetics, floor heating is good, there is no excess unsightly radiator at home from the degree of warmth, floor heating is relatively good, heat dissipation is evenly regional, dry places are not suitable for floor heating, the home will be too dry The price is high, the floor heating is expensive, generally special floors and then repaired, in fact, they have their own advantages, if they are better plumbing materials, the service life of floor heating will be longer, the specific reasons have not been carefully studied. But if you want to repair the heating, it will be troublesome, it is said that the current floor heating board can be disassembled and assembled at any time, that is not very understood.

In terms of the current **, floor heating is more popular.

If you live in a building with floor heating upstairs and downstairs, then I recommend hanging heating, there is heating up and down is not cold, if you add floor heating, the home will be too dry.

If you just want to install a floor heating, it's still good, especially in Baotou, the city of plumbing is not very good, and the floor heating is more secure in terms of warmth.

Floor heating is better, if you lay wooden flooring, then use laminate flooring, but the quality is a little higher.

There are several requirements for wood flooring for floor heating, which must be done, I will not talk about it here, it is recommended to use water for heating.

Renovation of new houses. Floor heating bar, wall mounted heater, no matter what color, I don't feel like it fits the decoration. Also, the wall-mounted heating affects the effect of the curtains.

If you pack heating. Curtains made into half curtains are even more ineffective. That's my opinion.

If I want to buy a house and renovate it, it will definitely be underfloor heating.

To do underfloor heating, you can lay wooden floors. The advantage of floor heating is that the surface card is relatively neat and tidy, and the disadvantage is that it is more troublesome to repair if there is a problem in the future.

Floor heating ash If there is a bad place when the work is hot, you have to plane it all or be ordinary.

1. The location selection of the divider and water collector.

The water divider and water collector are the parts of each water loop in the floor radiant heating, and it has the effect of distributing water flow to each heating area. At the same time, it is also the connection and conversion place between metal parts and plastic pipes, as well as the drain port for system flushing and hydrostatic test, so whether its location is suitable is very important for the entire heating system, and it should be located in a place that is easy to control and has drainage pipes, such as toilets, kitchens, etc. It should not be located in bedrooms and living rooms.

It is not advisable to be located in a storage room.

2. Selection of filters.

The floor radiant heating coil is generally a plastic pipe of DE16, with an inner diameter of only a dozen millimeters, once there is a foreign body blocked, the whole loop will lose its heat dissipation function, so it is particularly important to ensure unblocked, so it is recommended to force the filter to be set.

3. The balance of each loop.

According to the theory of fluid mechanics, the flow distribution of parallel loops is related to the resistance of its loops, and the length of each loop is kept equal or similar in length, that is, the flow balance of each loop is guaranteed, but because the heat load borne by each loop is different, and the loop with short pipeline and small resistance, although the heat load is small, but its flow rate is larger, so when it is difficult to balance the length of the loop, an adjusting device should be added on each loop.

4. Reserved expansion joints for the floor.

In order to ensure that the ground works normally in the heating project, when the span of the room is greater than 6 meters, the ground expansion joint should be set, the width of the joint should be 5mm, and when the heating coil passes through the expansion joint, a flexible sleeve with a length of not less than 100mm should be provided.

5. Residents are generally not allowed to make holes (eyes) on the floor and floor slabs (lower residents), and when they must be played, they should consult relevant professionals and find out the non-pipe parts before they can make holes (eyes) to ensure that the heating coil is not damaged.