What is the reason why the new smoke machine does not exhaust smoke?

Updated on home 2024-08-13
11 answers
  1. Anonymous users2024-02-16

    Range hood smoke exhaust reason].

    1. The partition in the middle of the exhaust pipe is not directly placed or opened (there is such a door in the exhaust pipe of the old-fashioned range hood), or the exhaust pipe is artificially blocked.

    2. The wind wheel is reversed or damaged.

    3. The smoke exhaust pipe is blocked.

    4. The capacitor is damaged (two-phase electricity needs capacitors to rotate forward, and three-phase electricity does not need capacitors), resulting in the reversal of the motor of the range hood, which may not see oil droplets in the oil drop box.

    5. The motor is damaged, the power becomes smaller, or the exhaust pipe is too long, and the resistance increases too much.

    Range hood non-smoking solution].

    1. The oil in the range hood is full and should be cleaned again;

    2. If the capacitor is damaged, replace the capacitor;

    3. The exhaust pipe of the range hood is flattened and the exhaust pipe is replaced;

    4. Listen to the sound of the wind, turn the air volume of the range hood to the highest, and then open it to the maximum, and then listen carefully to the sound, if the wind sound has only one "whirring" sound, it means normal, if there is a different sound, it means that the air outlet is blocked.

    5. Look at the wind wheel. This situation is rare, generally does not appear, is to observe whether the wind wheel of the range hood is rotating in the counterclockwise direction, if it is the opposite, there is no air volume. If the rotor itself is damaged, it is possible that the bearing is damaged, and in this case, the rotor needs to be replaced.

    6. Test the suction. The same is to turn on the air volume of the range hood to the maximum, and then use a newspaper to stick the air outlet, see if the newspaper can be sucked, and then pull out the smoke exhaust pipe of the range hood to see if the wind is the same as the last time, if the difference is very large, then it can be concluded that the smoke exhaust pipe is blocked.

    7. The motor is damaged, so the smoker should stop working, there is no buzzing sound, it is easy to judge.

    8. Light the lighter or candle, start the motor, check whether it is suction or blowing, blowing proves that the motor is reversed, and the suction proves that the motor power is too small, the fan blade is deformed, and the exhaust pipe is too long.

  2. Anonymous users2024-02-15

    The motor does not turn to exhaust smoke because the meniscus in the connection between the smoke exhaust pipe and the smoke machine is not fully opened, or the old pipe is stained with oil, you can make a pot of boiling water on the stove and smoke it with steam to melt the oil, it is best to disassemble and clean it, so that the pipe is clear and the smoke is better.

  3. Anonymous users2024-02-14

    It's not that the smoke extractor doesn't exhaust smoke, but that the smoke exhaust pipe is too small and long, and the smoke collector is not pressurized enough to get the smoke out of the house.

  4. Anonymous users2024-02-13

    You can ask him to buy a range hood and find him on the ground to repair the master, it's a four-star, just like that, you can change it.

  5. Anonymous users2024-02-12

    That's just the reversal, or the rotation.

  6. Anonymous users2024-02-11

    Reasons why the range hood does not smoke after cleaning: 1. Check the power socket at home first.

    Whether it is installed in place, if the contact between the plug and the socket is poor, or the power switch is not activated, it will also cause the mold to be unable to move. 2. When cleaning, whether it is disassembled, whether it touches the wiring inside, causing the inner line joint to be desoldered, and carefully find out the circuit break point or desoldering point. 3. If water gets inside, it may cause the range hood.

    The capacitor is damaged, and the capacitor capacity of the motor starting capacitor is reduced or short-circuited or broken, which requires the replacement of the capacitor of the same specification to make the motor run. Extended Information: Precautions for the use of range hoods:

    1. Use a special power socket. The special socket is firmly grounded, the power wire is connected normally, no extension cord is used, and there are not too many electrical appliances in multiple ports, otherwise it is easy to heat up the wire.

    Short circuit, electric shock, etc. 2. Cut off the power supply during cleaning. It is dangerous to clean the range hood when it is powered on, and it is easy to get an electric shock accident due to misoperation.

    3. Do not touch electrical components with wet hands. In the kitchen, it is often necessary to clean the dishes, and when your hands are wet, you cannot directly touch the power plug and operate the switch, otherwise it is easy to get an electric shock. 4. Strictly prohibit the limbs from getting wet.

    Clean the range hood, be careful not to drip water onto the motor, switch, and connector.

    or there may be a risk of electric shock.

  7. Anonymous users2024-02-10

    Summary. 3.Water enters the hood, resulting in damage to the capacitor of the range hood, and the capacity of the motor starting capacitor is reduced or short-circuited or broken, which requires the replacement of the capacitor of the same specification to make the motor run.

    Pay attention to the use of range hoods, and use special power sockets. The special socket is firmly grounded, the power wire is connected normally, no extension cord is used, and too many electrical appliances are not used, otherwise it is easy to have wire heating, short circuit, electric shock, etc.

    Hello dear! We'd be happy to help you answer your questions! The range hood does not smoke after cleaning because:

    1.If the power socket at home is not installed in place, the contact between the plug and the socket is poor, or the power switch does not start to move, then it will also lead to the inability to start the swim branch. 2.

    When cleaning, disassemble and touch the wiring inside, causing the inner line joint to be desoldered, and carefully find out the circuit break point or desoldering point.

    3.Water enters the inside, resulting in damage to the capacitor of the range hood, and the capacity of the motor starting capacitor is reduced or short-circuited or broken. Pay attention to the use of range hoods, and use special power sockets.

    The special socket is firmly grounded, the power wire is connected normally, no extension cord is used, and too many electrical appliances are not used, otherwise it is easy to have wire heating, short circuit, electric shock, etc.

    The motor is running and windy, but the smoking effect is very poor.

    Dear, the motor is running and windy, but the smoking effect is very poor, you can see if the wind wheel is reversed or damaged <>

    So how do you look at it?

    Pro, close to the air outlet is the left wind wheel, the old ant is near the west wind wheel is the right wind wheel, the hood wind wheel installation and destruction of the direction is relative, most of them are turned to the inside of the potato.

    Oh, the wind turbine is rotating, which means that the wind turbine is not broken, right?

    Does it have anything to do with the exhaust pipe?

    Dear, it has something to do with the exhaust pipe.

    Pro, if the motor is damaged, the power of the range hood will be reduced, resulting in less smoke from the range hood.

    Okay, so how can I solve it?

    Dear, if the motor is damaged, you need to find a maintenance master.

    That is to say, the main thing is to check whether the motor is damaged, and what is the exhaust pipe to check.

    Pro, the exhaust pipe of the range hood is too long, and the increase in resistance will also lead to the poor smoking capacity of the range hood.

    Whether the wind wheel is reversed or damaged will also cause the range hood to be ineffective.

  8. Anonymous users2024-02-09

    The range hood can turn but does not exhaust smoke indicates that there is a certain problem, and the solution is relatively simple, and the specific solution is as follows:

    1. The primary need is to check whether the check valve can be opened normally; It is possible that the source imitation is that the blades of the check valve can not be turned over normally, although the motor rotates, but the oil smoke can not be discharged from the air outlet, and the pressure at the air inlet cannot be less than the pressure of the air outlet to form a pressure difference, so I feel that I do not smoke; In the same way, see if the flue mouth is blocked.

    2. After that, check whether the motor rotates, if the motor rotates, the pressure of the air outlet will be less than the pressure of the air inlet, so it is also a non-smoking wild cracked oak.

    Tips for using range hoods:

    1. Just turn on the gas, and turn on the range hood.

    In fact, the function of the range hood is not only to smoke away the cooking fumes, but also to eliminate gas pollution.

    2. Pay attention to ventilate the range hood to make up for the fresh air.

    Don't just pay attention to the smoke and neglect to make up for the fresh air. Along with the exhaust fumes, a ventilation fan is used to make up for the fresh air, so that the gas can be kept incinerated with enough oxygen.

    3. Do not wipe the range hood with alcohol and metal solutions.

    Wipe the plastic parts with an alcohol solution and wipe the exterior of the range hood with metal, which will make the plastic parts and the exterior of the range hood tarnish.

  9. Anonymous users2024-02-08

    Check whether the smoke exhaust pipe of the smoke machine is too long, the length of the smoke exhaust pipe is controlled within 1.5 meters, and the number of bending is 1 time; Check whether the installation height of the range hood is too high, the installation height of the range hood is generally determined according to the site situation, and its lower edge is generally 610-750mm away from the counter surface of the cabinet; The angle of the smoke exhaust pipe affects the smoke exhaust effect; It is recommended to check what the problem is first, and then contact the manufacturer after-sales service to deal with it.

    Extended Information: Range Hood Cleaning Method.

    First of all, you need to prepare the cleaning liquid, add a certain amount of vinegar and dish soap to the water, and then stir well.

    Remove the box of the range hood with grease, wipe the remaining grease inside with a paper towel, and then place it in the washing solvent to clean it again. If there is a solid residue in the box that is difficult to clean, it can be cleaned with a steel wool ball. Finally, clean the box with clean water.

    The top of the range hood is also a difficult place to clean, you can spray the solution to the top grease and scale, and then use steel wool balls and sponge cloth to scrub the surface of the range hood clean. The smooth surface of the range hood is easy to clean, and you only need to wipe it back and forth with a sponge cloth dipped in cleaning liquid.

    Tips: The oil stain in the snail shell and the oil stain of the wind wheel will directly affect the smoke exhaust efficiency, and the long-term smoke exhaust will not be smooth will affect the human body.

  10. Anonymous users2024-02-07

    <> the solution of non-smoking of the new range hood: 1. The smoke suction machine can exhaust the indoor fumes in the shortest possible time, but it is not possible to smoke them all at once, so please choose high speed when using, and choose low speed to work for 5-10 minutes after cooking, so that you can completely exhaust the fumes.

    2. Use environment. When using, please keep the kitchen properly ventilated, and pay attention to the window should not be opened too large, otherwise it will affect the smoke exhaust effect. In addition, it is also related to the size of the kitchen, and the kitchen is too large to affect the smoke removal effect.

    3. Do not clean for a long time. Please clean it in time according to the instructions of the manual.

  11. Anonymous users2024-02-06

    The reasons why a new range hood does not smoke may be due to the following aspects:

    1.Pipeline blockage: When installing the range hood, there may be residues in different parts of the pipeline during the connection of the pipeline, or other sundries may be mistakenly put into the pipeline during installation, resulting in the blockage of the pipeline and the inability to discharge the fume.

    The solution is to clean the pipes and unclog the blocked parts.

    2.Fan failure: The new range hood does not pump may be because the fan is faulty or the blower is not voltile-on, at this time, you need to turn on the air supply power supply to check whether the fan is rotating, whether there are abnormal conditions such as noise and vibration.

    If you need to replace the fan, it is recommended to contact the manufacturer or a special contractor for processing.

    3.Improper installation of range hood: When installing the range hood, there may be some unreasonable design and installation, such as the installation of the ceiling range hood with a shield at the bottom. Therefore, it is necessary to carefully check that the installation position and height are correct, and if the installation is not done properly, it is best to reinstall it.

    4.Circuit failure: The new range hood does not exhaust because of the circuit failure, that is, whether the connected power supply is normal, whether the circuit is open or short-circuited, etc. In this case, a professional is required to carry out the inspection and repair.

    5.Operation error: the new range hood does not exhaust may also be due to improper operation, when using the range hood, you need to operate in accordance with the instructions to ensure the normal operation of the stove, and take the correct use guidance to achieve the effect of high shed grip on the range hood.

    It is recommended to read the manual before using the range hood and have a certain understanding of the use method before starting to operate.

    Summary: There are many reasons why the new range hood does not smoke, and it needs to be carefully investigated and diagnosed to find an effective solution. It is recommended that when encountering this kind of problem, contact the nearest after-sales service or professional maintenance workers, so that they can check and repair, so as to ensure that the range hood can work normally and prevent it from affecting life and work.

Related questions
15 answers2024-08-13

I used to work in a hydropower station, and my colleagues who worked in hydropower stations all knew that they had to release water during the flood season to lower the water level to the standard level, and there was no specific time for the time, sometimes at night, sometimes during the day, this is not necessarily. When I was in the power station, I had to turn on the meter, and then I operated it myself (I couldn't control it remotely) and when I wanted to release water, they would call **, just like that, I slowly learned to smoke, and the purpose of smoking at that time was to refresh myself, and now I am used to smoking.

9 answers2024-08-13

It is said that the reason for the quarrel between the locker room and the coach.

10 answers2024-08-13

The main reason is that the main reason is that it has suffered from the harm of pests and diseases, or it is a disease, when the leaves do not develop, you should first check whether there is white powder on the back of it, if there is powdery mildew, at this time you need to be timely **, or have fertilizer, then there will be macular and white spots.

22 answers2024-08-13

For heat dissipation facilities in the home, radiators are more commonly used. However, for radiators, you will find such a phenomenon, that is, the radiators that were very hot last year, but after a year, they are not hot again, and the probability of this phenomenon is very high. So why does the radiator appear not hot? >>>More

6 answers2024-08-13

If you are using a Huawei mobile phone and the charger is connected, if the mobile phone does not respond, the battery charging icon is not displayed, and the charging cannot be charged, you can follow the following methods to determine the cause of the problem: >>>More