Xiaomi Mi 2s is not good if you change the screen without any pixels?

The reason why changing screen pixels is bad is that the user is replacing a fake brand screen.

Xiaomi's accessories manufacturers are not allowed to supply Xiaomi after-sales channels unexpectedly, so in addition to after-sales, there is no original screen.

The Xiaomi screens sold outside or the screens that are replaced after sales are all copycat screens or refurbished screens.

The copycat screen is a fake, and the quality is not ***.

The refurbished screen is the first screen with the outer screen broken and the inner screen is lossless, and the screen produced by the refurbishment and suppression of a cottage external screen is called the rear pressure screen in the industry.

Hi! Please turn on the camera Click the menu key Settings Advanced settings Simple mode, select Off, switch to expert mode, and then go back, turn on **Size, set the next pixel.

Tips for setting the parameters of the camera that comes with Xiaomi mobile phones.

You can refer to it!

Are you changing the original screen? If it's not the original, it's definitely a cheap screen, and the pixels are definitely not good!!

1. Whether there is focus in the photo, take pictures after the screen is focused, but there is generally an autofocus function, check whether there is a problem with the mobile phone and cannot focus, 2. See if there is dust in front of the lens, or whether the dust enters the lens dust lens, 3. Check the mode of photography to check the resolution. Steps: Open the camera - Settings - switch to expert mode (** size selection 800w), the second selection is very fine, others can be freely selected, it is recommended to default on, 4. Clear the phone cache, set up the app, find the camera program, clear the cache, 5. Restart the phone to try.

The default pixel of Xiaomi phones is only 500W.

You have to set it up yourself.

You can select the advanced mode in the camera settings, and then there is a pixel in it that can be adjusted to 800w and **The quality can be turned up a bit.

Hi! The screens of Mi 2 and Mi 2S are exactly the same, Xiaomi Mi 2 and 2S both belong to warm screens, you can adjust the temperature and warmth in the phone settings - display and then try again.

The screen material is IPS hard screen, the screen size is inches, the resolution is 1280 720, and the display effect is the same.

The Xiaomi Mi 2 configuration is as follows:

Main screen size: inches;

Resolution: 1280x720 pixels;

Rear camera: 8 million pixels;

Front camera: 2 million pixels;

Battery capacity: 2000mAh;

Battery type: Removable battery;

CPU: Quad core;

RAM: 2GB.

The Xiaomi Mi 2S configuration is as follows:

Main screen size: inches;

Resolution: 1280x720 pixels;

Rear camera: 13 million pixels;

Front camera: 2 million pixels;

Battery capacity: 2000mAh;

Battery type: Removable battery;

CPU: Quad core;

RAM: 2GB.

Ahh

This situation is normal, the Xiaomi Mi 2S rear camera usually can't focus slightly, that is, it can't shoot very close objects or things, even if the focus function is normal, the focus will be blurred, and the objects shot after the appearance are blurred and ghosted. I have encountered this problem many times in the process of solving problems for many rice noodle friends, and most of them appear after disassembly. There are 2 ways to solve this:

1. Disassemble the camera again, remove the camera and then install it or flick the camera with your hand and then install it, and the problem solving rate is 95%. I used this method to solve the problem that the camera head of several meters 2s is not clear, and the effect is very good.

2. Replace the camera, but this method is not recommended, because the vast majority of unfocused cases are not camera damage, but only fine-tuning problems, and it is recommended to use the first method to solve it.

As for why this problem occurs, I don't know, the layer consults professional customer service staff, saying that it is a fetal disease, that is, the hardware design is defective, but as long as it can be done, it is OK. Therefore, I recommend using the first method to solve the problem.

I've had this problem too! You can do a factory reset!

If it is not a screen that is replaced after Xiaomi after-sales, it is not original, unless it is the original screen removed from someone else's mobile phone that was purchased.

In order to protect its after-sales rights and interests, Xiaomi does not allow accessories manufacturers to supply to channels other than after-sales.

Therefore, in addition to the after-sales of original accessories, other channels are counterfeit or refurbished.

A knockoff is a fake.

Refurbished goods are the seller's ** inner screen is not broken but the outer screen bursts, replace a cottage outer screen to pretend to be the original to sell, the industry calls it the rear pressure screen, easy to break, and the control is not normal.

The use of counterfeit screens, the quality cannot be guaranteed, the compatibility with the mobile phone is not good, coupled with non-professional private maintenance, may cause more damage to the mobile phone.

Log in to the homepage of Mi Net, click on Mi Home or service point at the bottom to query the address and ** of Mi Home and after-sales maintenance points, and you can also check the address and ** of local after-sales maintenance points in the service in Xiaomi ** on your mobile phone. Users can call the after-sales service in advance.

I really don't know about this, but the compatibility doesn't work.