What is the standard for the implementation of decoration and decoration quality

The quality of decoration and decoration implements the "Construction Quality Standards for Building Decoration and Decoration Engineering".

This standard is based on the national standard "Code for Acceptance of Construction Quality of Building Decoration Engineering" GB 50210-2002 and the "Unified Standard for Construction Quality of Building Engineering" ZJQOO-SG-013 and -2006 of China State Construction Engineering Corporation;

Comprehensively consider the technical level, management ability, technical quality of construction team operators and the existing market environment and other objective conditions of the construction enterprises affiliated to China State Construction Engineering Corporation, and evaluate the quality of the project;

In order to unify the internal acceptance methods, quality standards, and quality grade evaluation and procedures of the construction quality of building decoration and decoration projects of China State Construction Engineering Corporation, and lay the foundation for creating a "process boutique" of project quality.

The quality acceptance of building decoration and decoration projects is mainly based on two standards: Chapter 10 and Chapter 11 of the Code for Construction and Acceptance of Building Decoration Engineering (JGJ73-91) and the Quality Inspection and Evaluation Standard for Construction Engineering (GBJ301-88). These two standards have played an important role in ensuring the quality of building decoration projects.

There are several habitual expressions about architectural decoration, such as architectural decoration, architectural decoration, architectural decoration, etc. Judging from the use of the three terms in the formal documents, the "Code for Construction and Acceptance of Building Decoration Engineering" (JGJ73-91) and the "Quality Inspection and Evaluation Standard for Construction Engineering" (GBJ301-88) continue to use the term "architectural decoration", and the "Regulations on the Quality Management of Construction Projects" and the "Code for Fire Protection of Building Interior Decoration Design" (GB5022-1995) follow the word "building decoration". From the point of view of the meaning of the three nouns, "architectural decoration" reflects the surface treatment is more appropriate, and the word "decoration" is more consistent with the basic treatment, keel setting and other engineering content.

The original meaning of the word decoration refers to framing. In addition, the term decoration is becoming more and more widespread in practical use. For the above reasons, this code decides to adopt the term "decoration" and define "architectural decoration".

The terms "architectural decoration" in this article have the meanings of "architectural decoration", "architectural decoration" and "architectural decoration" as currently used.

The implementation standards for decoration quality include national standards, landmarks, and enterprise standards. The national standard is the minimum standard that must be met. Second landmark.

The highest is the enterprise standard. He is above the landmark and the national standard. There are many specific standard documents.

Each type of work has different specifications. It is recommended to go to the architecture bookstore to find me.

The quality of decoration and decoration implements the "Code for Construction of Residential Decoration and Decoration Engineering" (GB50327-2001), and the new standard is implemented in 2007.

The quality of decoration and decoration implements the "Code for the Construction of Residential Decoration and Decoration Engineering" (GB50327-2001), and there are 15 specialties in the "Code", which contains all aspects of decoration.

The quality of decoration and decoration implements the "Construction Quality Standards for Building Decoration and Decoration Engineering".

This standard is based on the national standard "Code for Acceptance of Construction Quality of Building Decoration Engineering" GB 50210-2002 and the "Unified Standard for Construction Quality of Building Engineering" ZJQOO-SG-013 and -2006 of China State Construction Engineering Corporation;

Comprehensively consider the technical level, management ability, technical quality of construction team operators and the existing market environment and other objective conditions of the construction enterprises affiliated to China State Construction Engineering Corporation, and evaluate the quality of the project;

In order to unify the internal acceptance methods, quality standards, and quality grade evaluation and procedures of the construction quality of building decoration and decoration projects of China State Construction Engineering Corporation, and lay the foundation for creating a "process boutique" of project quality.

The construction of houses in our real life, as well as other engineering buildings, are inseparable from the decoration of engineering. Especially in our house construction, many homeowners pay special attention to the quality of their house engineering decoration, hoping that the house they live in can have a good decoration. However, in real life, we will still encounter many quality problems in the decoration projects of buildings.

So, what is the quality standard for decoration engineering?

1. What is the quality standard of decoration engineering?

This standard is based on the China State Construction Engineering Corporation (hereinafter referred to as China State Construction Corporation) in the city of Jian.

2004) No. 5 "Notice on Comprehensively Carrying Out the Preparation of Construction Standards for Various Specialties of China State Construction Corporation", which was organized and compiled by the Third Engineering Bureau of China State Construction.

This standard summarizes the practical experience of the construction quality management of the building decoration project of China State Construction Engineering Corporation, with the guiding ideology of "highlighting quality planning, improving technical standards, strengthening process control, and adhering to continuous improvement", and takes the improvement of quality management requirements as the core, and strives to effectively control the manufacturing cost of the project, so that the quality of the building decoration and decoration dust shortage project is effectively guaranteed and continuously improved.

This standard is based on the national standard "Code for Acceptance of Construction Quality of Building Decoration Engineering" GB50210-

2002, China State Construction Engineering Corporation, "Unified Standard for Construction Quality of Construction Projects", zjqoo-sg-

013, -2006 on the basis, comprehensive consideration of the technical level, management ability, construction team operators of the technical quality of the construction team and the existing market environment and other aspects of the objective conditions, the quality of the project quality assessment, in order to unify the China State Construction Engineering Corporation system of the construction of the system of construction enterprises building decoration engineering construction quality of internal acceptance methods, quality standards, quality grade assessment and procedures, to create the quality of the project "process quality" to lay the foundation.

This standard will be revised regularly or irregularly according to the changes in relevant national norms and the needs of enterprise development. In the process of implementing this standard, construction enterprises at all levels are requested to pay attention to the accumulation of information, summarize experience, and please timely feedback the opinions or suggestions and relevant information to the quality management department of China State Construction Engineering Corporation for reference when this standard is revised.

1) The building decoration project must be designed, and a complete construction drawing design document must be issued.

2) The design of building decoration and decoration projects must ensure the structural safety and main functions of the building. When the main body and load-bearing structure are changed or the load is increased, the original structural design unit or the design unit with corresponding qualifications must verify the relevant original data and verify and confirm the safety of the existing building structure.

3) The materials used in building decoration and decoration should be fireproof, anti-corrosion and insect-proof according to the design requirements.

4) In the construction of building decoration projects, it is strictly forbidden to change the main body of the building, load-bearing structure or main functions without authorization in violation of the design documents; It is strictly forbidden to dismantle and alter water, heating, electricity, gas, communications and other supporting designs without design confirmation and approval of relevant departments.

5) The construction unit shall abide by the laws and regulations on environmental protection, and shall take effective measures to control the pollution and harm caused by various dust, exhaust gas, waste, noise, vibration and other dust on the construction site.

6) The plastering layer of the exterior wall and ceiling must be firmly pasted between the base layer and the plastering layer.

7) The installation of external doors and windows of the building must be firm. It is strictly forbidden to fix doors and windows with nails when installing doors and windows on masonry.

8) Heavy lamps, fans and other heavy equipment are strictly forbidden to be installed on the keel of the ceiling project.

9) The number, specification, location, connection method and anti-corrosion treatment of the embedded parts (or post-embedded parts) and the reed connectors of the veneer installation project must meet the design requirements. The on-site drawing strength of the embedded parts must meet the design requirements. The veneer installation must be secure.

10) The veneer with bricks must be pasted firmly.

11) The structural bonding material used in the hidden frame and semi-hidden frame curtain wall must be neutral silicone structural sealant, and its performance must be in line with the "Silicone Structural Sealant for Construction".

GB17776); Silicone structural seals must be used within the expiration date.

12) The quantity, specification, location and anti-corrosion treatment of various embedded parts connected by the main structure and the curtain wall must meet the requirements.

13) The connection between the metal frame of the curtain wall and the embedded parts of the main structure, the connection between the column and the beam and the installation of the curtain wall panel must meet the design requirements, and the installation must be firm.

14) The height of the guardrail, the distance between the railings, and the installation position must meet the design requirements. The guardrail installation must be secure.

The quality acceptance of the decoration project shall comply with the following provisions.

1. The quality of the division (subdivision) project included in the decoration (sub-unit) project shall be accepted.

2. The quality control data should be complete.

3. The testing data related to the safety and function of the branch project contained in the decoration (sub-unit) project should be complete.

4. The results of spot checks on the main functional items shall comply with the provisions of the relevant professional quality acceptance specifications.

5. The perception quality acceptance should meet the requirements.

1. What is the quality acceptance procedure for decoration projects?

1. The construction unit shall organize the completion acceptance of the project and preside over the acceptance meeting (the construction unit shall make a brief speech before the meeting, introduce the project completion acceptance procedures and make a summary speech at the end of the meeting).

2. The engineering survey, design, construction and supervision units shall report on the performance of the project contract and the implementation of laws, regulations and mandatory standards for engineering construction in all aspects of the project construction.

3. The acceptance team reviews the project archives of the construction, survey, design, construction and supervision units.

4. The acceptance team and the professional group (composed of survey, design, construction, supervision units, supervision stations and other relevant experts organized by the construction unit) inspect the quality of the project on the spot.

5. The professional group and the acceptance team express their opinions and make a comprehensive evaluation of the engineering survey, design, construction, equipment installation quality and various management links; The acceptance team forms the project completion acceptance opinion, fills in the "Construction Project Completion Acceptance Report" and signs it (with the official seal).

2. What are the key points of engineering quality control?

1. Process quality control.

Including the quality of construction operation and the quality of construction technology management.

1) Determine the process of engineering quality control;

2) Actively control the activity conditions of the process, mainly referring to the factors that affect the quality of the process;

3) Check the quality of the process in a timely manner, and put forward the requirements and measures for the follow-up work;

4) Set the control points of process quality.

2. Set up quality control points for loose oranges.

For a certain process or link with high technical requirements and difficult construction, set the focus of technology and supervision, and focus on controlling operators, materials, equipment, construction technology, etc.; In view of the process of common quality problems or easy to produce unqualified trace excavation products, effective measures are formulated in advance to focus on control; Special attention should also be paid to new processes, new materials and new technologies.