Oxidation of cell shipments is complained, how to package to prevent oxidation? 15

Vacuum-packed, insulating air from contact with it.

You can try the Intercept anti-oxidation packaging bag, the Intercept anti-rust and anti-oxidation material is the most advanced anti-rust technology on the market, is a patented product developed by Lucent Science Bell Laboratories in the United States, and has been developed for more than 30 years since it was used for anti-corrosion protection of the Statue of Liberty in 1984.

Intercept works by:

Intercept technology is a permanent integration of copper ions and polymer molecular chains to neutralize corrosive gases. The patented technology is based on the principle that the area of copper ions after special treatment is 256 times greater than before treatment. Then it is permanently integrated with the molecular chain of the polymer, and can no longer return to its original state, like a large net, which can neutralize all the foreign corrosive gases that pass through the film.

Intercept Technology reacts with corrosive gas elements in the atmosphere and neutralizes these gases to make them lose their corrosive activity. The gases sealed in the INTERCEPT anti-rust material packaging will no longer corrode (rust, oxidize, solderability, etc.) and age the packaged items. A small amount of water vapor passing through the INTERCEPT antirust material does not cause corrosion because the corrosive material contained in it has been neutralized during the penetration process.

The characteristics are: compared with traditional anti-rust and protective technology packaging materials such as VCI vapor phase anti-rust, INTERCEPT's new interception anti-rust technology is safer and more secure

Permanent anti-static protection.

Suitable for a wider range of ambient temperatures: -35 80

The duration of protection is long: up to 10-15 years.

The range of anti-rust and anti-corrosion materials is wider.

Including: ferrous metal, non-ferrous metal anti-rust, protection, mildew and other protection; Electronic components, circuit board antistatic, shielding electromagnetic and radio frequency interference, moisture and other protection; anti-aging protection of plastic and rubber products, etc.;

It is more environmentally friendly, safer and harmless to the human body.

Compliant with RoHS, TRGS 615 and TRGS 900 standards, it is not harmful to humans and the environment.

OK. Because plastic wrap keeps out oxygen.

It is okay to keep it in the refrigerator for a short period of time. But after a long time, it will not work.

The environment should be kept in good condition and then wrapped in plastic wrap.

Placement Environment Requirements: Temperature 22 3Humidity 60% Humidity and high temperature will cause oxidation, it is best to make a good production plan and deal with it at one time in time

Oxidation is for sure. Unless it is sealed in an anti-static bag, it may be better.

Metal oxidation requires exposure to air and electrolyte solutions. Applying grease is effective in preventing contact with electrolytes. and isolate oxygen. Therefore, oxidation is prevented. Let's say olive oil. Silver is the only metal used to make jewelry that oxidizes.

To prevent the metal on your jewelry from being oxidized, you should:

It is best not to wear it when bathing or sleeping.

Wipe it clean with a silver cloth before and after wearing it every day, avoid oxidation in contact with the flowing air when not wearing, please put it in a jewelry box or sealed bag, and store it away from light.

Keep your accessories dry and don't wear them for swimming, especially in the sea and hot springs.

People who sweat a lot are not suitable for wearing silver jewelry.

If you find that the jewelry has a slight oxidation, first use a soft brush to clean the fine seams of the silver jewelry, and then wipe the surface with a silver cloth.

You can try applying a little toothpaste to the surface of the silver, scrubbing it with a toothbrush dampened in warm water, and finally drying it with a whole wool fleece.

When the surface of the silver jewellery is slightly corroded and slightly discolored, it can be gently wiped with detergent or hotter medium soap, first with a soft brush, and then dried with a full wool velvet, at which point the silver jewellery will show its original shine.

Rinse with laundry detergent and warm boiling water into a solution, then wet the surface with phosphoric acid solution, and then wipe with a flannel cloth to make the silver jewelry cleaner.

The use of silver cloth is one of the fastest and most convenient ways, silver cloth contains silver maintenance ingredients, can not be washed, wipe the stain for silver, can be used many times.

If the silver jewelry is not sealed or wiped frequently, it is easy to darken the color.

The best way to maintain silver jewelry is to wear it every day, because the body oil can make the silver produce a natural warm luster (of course, there are exceptions, this varies from person to person).

This is electroplated hardware. If it is oxidized and rusted, it will not be treated, and if you want to wipe it without oxidizing the oily things, it will be no problem.

Generally, jewelry with high purity is not easy to be oxidized, I recommend that if you are afraid of oxidation, hide it in a dry and sealed jewelry box after wearing.

You can see that your baby is an electroplating product. Even the best electroplating process, if placed in the air for a long time, will fade due to oxidation (especially gold), this kind of jewelry itself is low, not suitable for the use of very expensive maintenance water for maintenance, as long as you avoid acid, alkali and humid environment. Humid environments include:

Do not wear it when bathing or washing your face, or when you sweat profusely. When taking it off, it should be wiped clean with a dry cloth immediately, and then the baby should be sealed in a sealed ziplock bag, which can keep the baby shining for a long time

In case of oxidation, the oxide layer can be carefully wiped off with a flannel cloth.

Put some butter on it, apply it evenly, don't let it come into contact with water, if the battery starts to seep out, then the battery is not working, it needs to be replaced.

The easiest way to do this is to butter it!

I bought the matting agent first and then I bought it, and I kept it in the window.

Buy a hood, the kind that you use to show off the model.