-
It's pulled into the car along the gap in the door, but you can't make a hole in the roof, otherwise your roof will be useless.
If you don't need to destroy the car body, you can directly pull the wire in the front door or the rear door folding door crack, because the sealing strip of the door is relatively thick, it does not affect the closing of the door. You don't have to do it yourself, just get the thread right for you by the repair shop.
-
Generally, SUV cars are installed with these roof lights, but it is best not to open them in urban areas and traffic arteries, just as a decoration, otherwise the traffic police will dismantle one and one will fine you.
Generally, when installing roof lights, there are more spotlights, generally five or six, and it is meaningless to see more, and others feel stupid when they see it.
Go to a car boutique to fix the mounting frame of the ceiling light, or go to the aluminum alloy material store to order it, and come back and spray it black with your hand.
A relay is added to prevent the light from being too electric and ablative to the vehicle's circuit board.
The dome light line is drawn into the dashboard of the car along the front of the left front door, and a switch is installed on the empty button board of the dashboard. Empty key switches are basically on the dashboard of every car.
There are two ways to install the roof light stand, one is that the magnet is fixed on the roof light stand and sucked directly on the roof, so that the roof will not be damaged, that is, there is no need to drill holes. However, it is difficult to buy a strong suction type for magnets. If the suction power is not enough, it will fall off at high speeds.
There is also a drilled hole, fixed on the roof of the car, if you want to be safe, this method is good, but it hurts the car.
Another is that the general SUV car basically reserves the installation seat of the roof rack, and the roof light rack is designed according to the fixed position of the luggage rack.
-
There are buttons next to the roof lights, and there are generally three modes, namely open-always open, door open-closed, and closed-closed. When the button is set to "Door", the light will automatically light up when the door is open and turn off automatically when the door is closed.
When the switch is in the "door" position of the beam, the light will light up if the door is open. Equipped with an interior light timer, the interior lights will continue to turn on for about 15 seconds when:
1.With the driver's door closed, pull the key out of the ignition.
2.When the mechanical key is not plugged into the ignition, turn the ignition to the "locked" position.
3.When the key is not in the ignition, open the driver's side door lock.
4.When there is no key in the ignition, Guan Sen closes the last door.
This interior light timer will be canceled in the following cases:
1.The driver's door was locked.
2.Turn the ignition to the "on" position. When the switch of the rear reading light is in the "on" position, the rear reading light will illuminate regardless of the status. When the switch is in the "off" position, the rear reading light does not illuminate, regardless of the status.
-
There are buttons next to the roof lights, and there are generally three modes, namely ON continuous mode, door opening and closing mode, and O FF off mode. When the button is set to the door, the lights will automatically turn on when the door is opened, and will automatically close when the door is closed.
When the switch is in the "door" position B, if the door is opened, the light is on. Equipped with a timer for the interior light, the interior light will continue to be on for about 15 seconds when:
1. With the driver's side door closed, pull out the key from the ignition.
2. When the ignition switch is not inserted into the mechanical key, the ignition switch turns to the "lock" position.
3. When the key is not in the ignition switch, open the driver's side door lock.
4. Close the last door when there is no key in the ignition.
The interior light timer will be canceled in the following cases:
1. The driver's side door is locked.
2. The ignition switch is turned to"on"Location. When the rear reading light switch is in the "on" position C, the rear reading light will light up no matter what state it is in. When the switch is in the "off" position A, the rear reading light does not light up, regardless of the state.
Photo by Ling Xiufang) @2019
-
There are buttons next to the roof lights, and there are generally three modes, namely open-always open mode, door open-close mode Liang Kaichun and closed-off mode. When the button is set to "Door", the light will self-drive when the door is opened, and will automatically turn off when the door is closed.
When the switch is in the "door" position, the light will light up if the door is open. Equipped with an interior light timer, the interior lights will continue to turn on for about 15 seconds when:
1.With the driver's door closed, pull the key from the ignition.
2.When the mechanical key is not plugged into the ignition, turn the ignition to the "locked" position.
3.When the key is not in the ignition, open the driver's side door lock.
4.When there is no key in the ignition, close the last door.
The in-car light timer will be canceled in the following cases:
1.The driver's door was locked.
2.Turn the ignition to the "on" position. When the switch of the rear reading light is in the "on" position, the rear reading light will illuminate regardless of the status. When the switch is in the "off" position, the rear reading light does not illuminate, regardless of the status.
Millions of car purchase subsidies.
The person who posted this post, the people who are traveling with you know that you are a peer at a glance, you must know that you still rely on the Guangdong and Hong Kong driving school to start yo, you hit your own mouth, if you want to say that the service of the Guangdong and Hong Kong driving school is poor, it is also because of your kind of people to make the reputation of Guangdong and Hong Kong poor, you leave the Guangdong and Hong Kong driving school is inevitable, leaving Guangdong and Hong Kong and joining into Anshunkang, the same will make their reputation scolded, thank you for choosing to leave, the Guangdong and Hong Kong driving school is blessed. An Shunkang has been doing poorly in his peers, of course, he didn't mean to attack him, he did not do well, the indicators were few, the management was not good, and the boss did not have the heart to operate, I heard that the management rights have been transferred now, I hope that An Shunkang's tomorrow will be good, but at least now please be sensible, a driving school for its own interests, and use this despicable means to attack peers, especially the attacker also started by Guangdong and Hong Kong driving schools, leaving Guangdong and Hong Kong and entering An Shunkang, you should not do this, you can't forget your roots, Have the right conscience. With a manager like you, Anshunkang should not be much better, because you don't know how to manage, you can't manage your own behavior, how can you manage your own team, and what kind of manager brings out what kind of team. >>>More
2. Landing: drill the ring, put the landing gear, slow down close to the ground, press down to raise the nose slightly, land smoothly without damage and listen to the car in the center of the red circle, about 20 seconds gold medal. The difficulty is average. >>>More