How to eliminate the Chevrolet Sail engine maintenance light

Updated on Car 2024-08-10
11 answers
  1. Anonymous users2024-02-15

    Theo doesn't have an oil maintenance lamp, so there's no need to use it. I hope it can help you, Chevrolet 4S maintenance technician will answer for you [If you have any questions about the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  2. Anonymous users2024-02-14

    This car is without maintenance lights [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  3. Anonymous users2024-02-13

    Hello, according to your situation and our maintenance experience, this car does not have a maintenance prompt light, I hope mine will satisfy you, I wish you a happy car, [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  4. Anonymous users2024-02-12

    Hello dear, there are three possible scenarios for the oil lamp to be on. The first is that the amount of oil in the car has decreased, and it has reached the bottom line of the oil dipstick, and the oil light is on is a warning of the lack of oil. The second possibility is that there is a problem with the car's oil pump, and the oil pressure is too low, causing the oil light to turn on.

    The third situation is that there is a problem with the car's sensor, the display is not accurate, and sometimes when the speed of the car is increased while driving, the oil lamp will go off automatically. The solution to the light of the oil lamp of the car is as follows: 1. The oil lamp is on indicating that the oil pressure is not enough, which is generally caused by the lack of crack and less oil

    2. It is necessary to check whether the oil rod is lacking, and then check whether the oil plug is off or leaking, if there is no problem with these two, the loss is caused by the inside of the engine: 3. It may also be caused by the oil pump not working well, or the oil pump filter screen is blocked, which needs to be checked in detail, it is best to tow it to the repair shop or drive it to the nearest maintenance, remember that it is not allowed to run too far to avoid unnecessary trouble.

  5. Anonymous users2024-02-11

    The regular service interval for the Chevrolet Sail is every 6 months or 5,000 km, which is in line with the service interval for most models. Change the oil and filter every 5,000 km, change the air filter, cabin air filter and gasoline filter every 20,000 km, brake fluid and spark plug every 30,000 km, antifreeze every 240,000 km or every 150,000 km or 10 years for the 5-year chain.

    It should be noted that there is no official replacement cycle for transmission oil, and 4S shops recommend replacing it at 60,000 kilometers or 3 years.

    1. There is a time limit for the replacement of "three filters".

    The oil filter must be replaced every time the car is routinely maintained. For long-term driving in non-dusty areas, the air filter can generally be used for 20,000 kilometers, and only needs to be cleaned for 7,500 kilometers. The life of the gasoline filter is related to the use of oil, if you have been refueling at a regular gas station, and there is no poor oil supply, you can consider replacing it for more than 20,000 kilometers.

    Under normal use, the brake pads can be used for 30,000-40,000 kilometers, and the original battery can be used for 3-4 years. There are many classifications of spark plugs, ordinary nickel alloy spark plugs can be used for 20,000-30,000 kilometers, platinum spark plugs can be used for 80,000-100,000 kilometers, iridium spark plugs can be used for 30,000-40,000 kilometers, etc. Car owners can appropriately adjust the service life of these parts and oil products according to the maintenance manual of their vehicle and the actual condition of the vehicle.

    2. Identification of oil replacement period.

    Brake fluid: The manufacturer generally requires that it be replaced at about 50,000 kilometers, but there is no big problem in practice, and the brake does not need to be replaced if there is no abnormality. The brake fluid is almost out of handbrake light will be on or flashing, at this time it is not too late to change the brake fluid, do not change the repair shop to change.

    Engine oil: foreign engine oil is basically replaced at 10,000 kilometers, and domestic manufacturers generally advance the replacement cycle to 7,500 kilometers and 5,000 kilometers in advance of poor domestic road conditions. However, as long as the oil color is clear and the oil level is not lower than the minimum liquid level indicated, there is no need to change the oil so frequently without special circumstances.

    Steering power oil: The power steering oil does not need to be changed frequently, and the dealer also recommends changing it once every 100,000 kilometers, and there will be no potential safety hazards if it is not replaced. If there is a lack of steering oil, there will be abnormal engine noise, and the steering power oil also has a minimum scale, which is lower than the minimum scale and then replaced.

    3. Deep washing of the engine.

    Deep cleaning of the engine is actually a cleaning of the internal lubrication system and carbon deposits of the engine. Because the engine works in a high-temperature and high-pressure state for a long time, the oil sludge and carbon deposits generated will reduce the efficiency of the engine, which is very necessary for old cars of a certain age. However, most of the lubricating oil used in cars has its own cleaning function, which can ensure that the engine does not produce sludge or a small amount within a certain number of kilometers.

    The deep engine cleaning of the new car at the time of the second warranty will cause a huge waste and is completely unnecessary. Cleaning the lubrication system, air intake, combustion chamber and other items is necessary for the maintenance of the car's engine, but in the normal state of vehicle use, it will generally take 30,000-50,000 kilometers to consider.

  6. Anonymous users2024-02-10

    When I used the original oil parts to do maintenance, the maintenance cycle is particularly short, the cost is not low, after using it twice, it will be directly replaced with G T magic red engine oil, which is the base oil of four types of PAO, with good anti-recession ability, long maintenance mileage, greatly extending the maintenance cycle, and now there is no problem with a change a year, which is much more convenient.

  7. Anonymous users2024-02-09

    Ordinary oil is 5,000 kilometers, and synthesized 7,000 to 8,000!

  8. Anonymous users2024-02-08

    Hello! Normal 5 thousand km oil change.

  9. Anonymous users2024-02-07

    5000 km, mine is also Sail.

  10. Anonymous users2024-02-06

    With the general full synthetic engine oil to run seven or eight thousand kilometers for change, cost-effective in general, I am now buying G T magic red engine oil to do maintenance, the oil quality is very good, is the base oil formula of four types of PAO, the oil is long-lasting and durable, there is no problem with a 15,000 kilometers for a change, compared to the previous maintenance to come a lot of cost-effective.

  11. Anonymous users2024-02-05

    The soul of the car light is its bulb, and its performance will affect the effect of night lighting, which is directly related to driving safety. Therefore, it is necessary to use high-quality car bulbs to fully ensure safety. If you find that the light is dim or defective, it is best to check for replacement in time.

    Don't think about waiting for them to be completely broken before fixing them, so as not to affect normal use.

    Replacement of headlights.

    1.Open the hood and observe the layout of car parts on the back of the headlights. If the gap is insufficient, then find a professional instead. Determine the headlight model of your car, and pay attention to the headlight identification model under the outer glass of the headlight.

    2.Unscrew the lampshade and note that the method of removing the lampshade will be slightly different depending on the model.

    3.Forcibly unplug the lamp head with the power cord, taking care to hold the lamp with your hands to avoid damage.

    4.Loosen the clamping spring of the lamp holder, remove the bulb, and reinstall the new bulb. The process of reassembly is reversed from the order of disassembly and will not be repeated here. Be careful to screw the dust cap when reinstalling it to prevent rain and dust from invading the headlights.

    If there is enough empty space on the back of the lamp to replace, you can replace it by following these steps:

    Replacement of tail lights.

    1.Open the trunk lid, cut off the power to the vehicle, and clean the trunk to leave room for replacement.

    2.Remove the dust plate on the back of the lamp. Most car lights come in two forms: bulb socket integrated and bulb socket split. The former is introduced here, and the latter is the replacement of the headlights.

    3.Identify the lamp that needs to be replaced, press and hold the rotating handle behind the lamp, and unscrew it. Replace the lights with new ones, paying attention to the model and color of the lights.

    4.Reinstall the lights and dust panels.

    In general, the disassembly and assembly of the taillights is relatively easy, the working space is empty, and the structure is relatively simple.

    Changing lights is not very technical, but it is not an easy task either. This is due to the different layouts of the various components in the car. For vehicles with compact layouts close to the back of the lights, there is very little empty space for the user to change the lights.

    Based on this situation, it is better for users who are not particularly skilled not to risk replacing them themselves, so as not to damage the internal parts of the car, and the gains outweigh the losses.

Related questions
10 answers2024-08-10

Hello! Regarding the problem you mentioned, it is generally directly related to the working conditions of the engine ignition system and the electronic fuel injection system, such as the ignition timing is too early or too late and the spark is too weak, and the mixture is too thick or too thin and other reasons will lead to the phenomenon of engine acceleration weakness, please focus on the following aspects of the inspection, one is to check whether the ignition system is normal, mainly to see whether the ignition energy is too weak and whether there is intermittent fire failure, mainly with the spark plugThe second is to check the electronic fuel injection system, check whether the fuel pressure is too low, whether the steam filter is blocked, check whether the fuel injection nozzle is blocked due to blockage or dripping caused by poor fuel injection and poor atomization, and then check whether the air filter is seriously blocked, if there is a blockage, it will lead to too little air intake and cause the mixture to be too thick. In addition, if the relevant sensors work abnormally, it will also lead to the above phenomenon you described, such as throttle position sensors, air flow meters or manifold pressure sensors, etc., and finally you need to check whether the cylinder pressure is too low and whether the exhaust system is blocked. The above suggestions are for your reference only. >>>More

10 answers2024-08-10

1. Clean the water tank regularly. Rust and scale can limit the flow of coolant in the cooling system, reduce heat dissipation, and cause engine overheating or even engine damage. Therefore, it is necessary to clean the tank regularly to remove rust and scale from it. >>>More

24 answers2024-08-10

The knock sensor is installed in the middle of the engine block, and the four-cylinder engine is installed between the 2nd and 3rd cylinders, or one in the middle of the 1st and 2nd cylinders, and one in the middle of the 3rd and 4th cylinders. Its function is to measure the degree of engine shake, and to adjust the ignition advance angle when the engine detonation.

15 answers2024-08-10

1. Poor combustion state: Poor combustion state of the engine is the main reason why the engine failure light is on. >>>More

22 answers2024-08-10

1. Start and stop the vehicle three times in a row. 2. Turn off the engine and pull out the negative pole of the engine's battery, wait for 30 seconds and then connect it, and then try to start. >>>More