How long does it take for a violin to open a new note

The timing of the opening of a new violin varies from individual to individual, but it usually requires a certain amount of time and patience.

Normally, the amount of time you spend playing the violin each day will vary depending on the individual's practice time and skill level. Some people may choose to practice for a few hours a day, while others may choose to practice for a shorter period of time each day. For most people, practicing for 30 minutes to 1 hour a day is a reasonable starting point.

However, even if you practice for a certain amount of time each day, it is not possible to see significant progress in a short period of time. It usually takes at least a few months or even a year before you really start to see an improvement in tone and an improvement in technique. This is because the process of opening the tone involves many factors, such as the honing of skills, the understanding of **, the sensitivity of the ears, and the sound quality of the piano itself.

In addition, if you want to speed up the opening process, you can try playing the violin more than practicing, such as in recitals or with other instruments. This allows the ear to become more familiar with the sound of the violin, which helps to better hear yourself when practicing.

In conclusion, the timing and progression of the opening vary from person to person and need to be determined according to the individual's situation and practice plan. At the same time, patience and consistent practice are key, and you will gradually see your progress over time.

Violin. The tone is getting better and better, but don't expect a year or two to reach a more perfect feeling. Even more than five hours of practice a day can't be achieved.

The process of opening the violin is actually a process in which a violinist injects soul into the piano. Regarding the question of the violin brand, to be honest, I haven't studied it. Because the purchase of violin itself is based on timbre and sound quality as the main consideration, no matter how good the maker is, there will be defective products, and the products produced by each brand will naturally be good and bad.

Buying a violin according to the brand, I personally think it's not a very scientific practice. If it is a violin produced by an assembly line with a price of several hundred, in fact, the timbre is almost the same, and there is no need to care too much about the brand. If you want to buy a gongqin, you might as well go to a violin workshop to buy it.

Hope what has been said helps you.

Summary. Practice more every day, and after about half a year, the voice will be turned on.

Practice more every day, and after about half a year, the voice will be turned on.

Is it okay to progress like this for three months?

If you ask the teacher to open it, the teacher can play some difficult pieces to make the violin's pronunciation sensitive, the dynamics to the object destruction ratio, the cover is equipped with the strings and saddles of each position, the piano surface, side plate and back plate can be well vibrate, and the violin is constantly adjusted.

And with proper maintenance, the piano will get better and better. It takes a while for a new piano to get used to it, and if you ask someone else to open the sound, it's someone else who gets used to it. It's going to take time for you to get used to it. Scattered.

Three months is not enough, at least about five months.

After the new instrument is made, the sound will be a little dry, or noisy. Open sound means that after the new piano is in hand, it needs a certain amount of time to play, and the sound can reach the purity of a sock, or the sound will be better. This is similar to the run-in of a car.

However, only a better handmade piano can talk about the upper tone, the mechanical piano made on the assembly line, the piano board is very thin with a good macro, and the sound of the new piano is already good, and it can't change much if it is pulled, so it can't talk about any opening and not opening.

How to pull to make a better sound, is there a way?

I'm talking about handmade pianos.

Let's talk about the method of pulling.

1.Hold the strings with a bow close to the horse and pull slowly and vigorously. 2.Start with a double note of the open string, and raise half a note with each bow of the closed finch of the closed finch for each change. 3.It can be alternately pulled by alternating between third degrees and width, fifths, and octaves.

It's been more than three months.

The string shaft is old and loose, what to do.

Please reply, wait a minute.

You can twist the pins, or you can smear some rosin on the saddle, and if it still comes loose, you have to change the strings.

If the 4 strings are loose, it should be that the tendon of the string board is broken, and the trace key Li Bang is reloaded. If only one string is loose, push the pin into the shaft hole and tighten it.

Summary. Hello, I'm glad to answer your question for how to open a new violin and the answer is: "Start with empty strings."

The so-called empty string start is to start the long process of sound cultivation based on the sound of the empty string. "A journey of a thousand miles begins with a single step. This "step" is nothing else, it is the original sound that can be produced by the new piano that I have just bought.

The acoustic quality of the wood material of the new piano is different, and the level of production technology is different, and the quality of the sound is of course different. The quality of the material determines the size of its vibration performance, the quality of the production determines the performance of the vibration performance of the material, and the speed of the opening effect determines whether the first two can be used to the best and increase the value of the violin.

Hello, I'm glad to answer your question for how to open a new violin and the answer is: "Start with empty strings." The so-called empty string start is to start the long process of sound cultivation with the sound of the empty string as the base empty Zen point.

"A journey of a thousand miles begins with a single step. This "step" is nothing else, it is the original sound that can be produced by the new piano that I have just bought. The acoustic quality of the wood material of the new piano is different, and the level of production technology is different, and the quality of the sound is of course different.

The quality of the material determines the size of its early spine vibration performance, the quality of the production determines the performance of the vibration performance of the material, and the speed of the opening effect determines whether the first two can be used to the best and increase the value of the violin.

The violin is a stringed instrument. There are four strings in total. The vibration is generated by the friction of the string and the bow, and then the vibration is transmitted to the back plate through the sound column in the resonance box, and the resonance generated by these parts produces a harmonious and bright sound with the segment.

The violin body (resonance box) is about centimeters long and is made of curved tops, backs, and sides bonded together.

If you are just a beginner in the cello, you can replace the strings when the strings are broken, and there is no mandatory time requirement, but if you have high requirements for your own practice and find that the strings are not pure in the fifth, you will have to replace them, and for professional performers, they generally have the habit of changing the strings every three to four months.

According to the calculation of practicing the piano for two hours a day, generally about five to six months, the sound quality of professional-grade nylon strings will be reduced, and the phenomenon of string scalp will occur in serious cases. At this time, the string position of the cello will also change, resulting in imperfection of the fifth, so at this time, we should replace the strings of the cello in time.

If your cello is made of high-carbon steel strings, you usually need to replace the strings every six months or so. Of course, if you are a beginner and do not have high requirements for the timbre of the strings, you can wait until the strings are broken and then replace them. In addition, it is also important to know that the performance of nylon strings is not very good after being replaced, and the sound state of the strings will stabilize after about three to four days of pulling.

If you are just learning the cello for a short time, or if you are a beginner, you can replace it with a new one when the string breaks, and there is no strict and mandatory time limit. If you have higher requirements for your own practice, you need to replace it with a new one when you notice that the fifth degree of the string is not pure. For professional players, it usually takes 3 to 4 months to replace the strings with new ones.