Can a broken violin be repaired?

How big is the piano? How much did you buy it? If there are more than 1,000 violins, you can repair the headstock, because the headstock is related to the pitch, etc., which slightly affects the timbre, if the violin is less than 1,000, it is recommended to buy it from the beginning, because the maintenance cost is very expensive, it is better to buy it.

Our teacher's piano can still be repaired if it is broken, and if the craftsmanship is good, it can be repaired very well, but it is worth it to see if it is worth it, and it is very expensive to repair, if it is more expensive than the piano itself, it feels meaningless. Unless you have a deeper affection for the piano, that's another story.

Personally, I think it's not necessary, although the headstock doesn't have much impact on the sound of the piano, but the piano has been greatly damaged after all, if it's a low-end piano, there is no need to repair it, if it's a good piano, you can try it then, but it is estimated that it costs a lot of money, and the piano is also ruined.

Yes, but the sound quality will have a considerable impact.

It's better not to fix it, it's not necessary, unless your piano sounds good, but it won't sound so good after repairing.

It can be repaired, but it will not work well.

The broken headstock can be repaired, can be connected or replaced, depending on the specific situation.

I am a professional repairer here, and you can chat privately if you have any questions.

Summary. Dear, Hello, I am glad to answer for you, the headstock of the cello is broken and repaired with hot glue.

How to fix the broken headstock of the cello.

Dear, Hello, I am glad to answer for you, the headstock of the cello is broken and repaired with hot glue.

Can this be fixed?

Hello, dear, this can be repaired.

1.You place the broken neck in its original position, padding the clip holder with the fretboard and buttons, and then using the clips to secure the neck. Check the fretboard's projection height, inclination, and alignment with the saddle, and make a record so that you can check it after restoration.

2.You remove the clip and apply hot glue to the broken side of the neck to glue it to its original position.

3.Then choose a suitable drill bit, a drill bit with a diameter of about 15 mm for cellos and about 7 mm for violins and violas.

4.You choose a maple that is larger and longer than the hole, and the wood must be dry thoroughly, otherwise the dowels will come loose after a thousand reductions. To make a dowel according to the diameter of the drill bit, it must be very well matched, but not too tight, because the wood will expand after gluing.

First, gently knock the wooden pin into the hole to the bottom of the hole, close to the plane of the chassis, and make a mark on the wooden pin for the positioning mark when sticking.

5.Remove the wooden pin and carve a groove on the side to allow excess glue to be squeezed out of it as you glue. The wooden pin and the hole are coated with thick hot glue, and the wooden pin is quickly knocked into the hole, do not rotate the wooden pin, and stop when you notice that the mark is reached.

Good. Okay, dear.

First of all, it is necessary to find out the correct position of each of the four strings. How to switch to the front of the violin when the violin string is broken, the lower string shaft on the left is equipped with the g (4) string, and the upper shaft is equipped with the d (3) string; The shaft on the upper right is the A (2) string, and the lower one is the E (1) string, please do not wear the crown or wear it, otherwise, it will either cause slippage or break the string. When the violin string is broken, how to change the string, emphasize again:

First, take the right seat, put one end of the string with a small copper pin into the string hole of the string plate, and the other end passes through the hole in the pinshaft and is neatly wound around the pin. How to change the broken strings of the violinNote: Facing the violin, the G and D strings are turned counterclockwise with the left hand, and the A and E strings are turned clockwise with the right hand.

How to change the broken violin strings As for how long each string turns, is another topic, but here I will tell you how to change the violin strings when they are broken6 and set the strings according to the "G, D, A, E" played by the timpani or keyboard instrument. Of course, if you have a good ear, you should first set the A string, and then determine the pitch of the other strings according to the relationship between the five degrees of the two adjacent strings, which is more convenient and convenient.

Find a professional piano shop and ask if there are any technicians who can provide restoration services.

Then take the piano over to check the damage, and if the cost of repairing it is high, it is better to buy a new one.

For example, if the headstock is broken, it may take thousands to repair, and if it is not a particularly good quality piano, it is better to buy another one.

The bow hair comes out of the tip of the bow and is reinstalled, and the bow hair needs to be combed to a flat level, and then fitted with a wooden stopper.