How to set up the DJI drone battery to automatically discharge

1. Use a full-power battery to avoid misestimating the battery life.

Before flying, be sure to fully charge the battery to ensure that the battery is fully charged.

2. Pay attention to the ambient temperature, and preheat the battery in a low temperature environment.

After entering the camera interface, select the three dots on the mainland in the upper right corner of the motor, select to enter the "Battery Settings" menu, and select the appropriate discharge time in the Start discharge time.

Currently, the Mavic 2 series, Mavic Pro, Wizard 3 series, Wizard 4 series (except the Enterprise Edition and Multispectral Edition), the Enlightenment series, and the Majestic 2 Enterprise Edition support setting this difference in the app.

iOS Android DJI GO 4 changes the battery self-discharge setting to 1-5 days, and the default discharge days are changed from 5 days to 2 days.

Hello, glad to answer for you! We're waiting for you! 1. Charge in an open outdoor environment

1) Remove the drone battery from the aircraft and place it on the ground in the open mold outside; (2) Connect the power supply and insert the power plug into the charging socket of the battery; (3) Press the charging button to start charging until it is fully charged; (4) Disconnect the power supply and put the battery back on the plane. 2. Charging in an indoor environment: (1) Remove the drone battery from the aircraft and place it on the dry ground indoors; (2) Insert the power plug into the charging socket of the battery; (3) Press the charging button to start charging until it is fully charged; (4) Disconnect the power supply and put the battery back on the plane.

3. Charging safety precautions: (1) It is forbidden to use the extension cable when charging indoors; (2) It is forbidden to use broken chargers and charging cables when charging; (3) Leave the charging location when charging is prohibited; (4) It is forbidden to overload the power supply while charging; (5) It is forbidden to place the battery in a water bush while charging.

The reasons why DJI batteries cannot be charged for a long time include the following aspects, and the reasons why the drone cannot be charged can be investigated from the following aspects:

1. The drone battery is broken, try to replace it with a new battery to see if it can be charged normally;

2. The drone charger is broken, if the charger is broken, you have to purchase the charger separately.

You can use a normal battery to charge it and try it, if you can, it should be the battery envy damage, measure whether the voltage is the same as the normal voltage, the general battery damage should be one or more strings of damage, if the damage can be found after-sales maintenance, as long as the warranty period should not be Min Wu will charge money, if it exceeds, it will be charged.

When the flight battery cannot be charged normally, please troubleshoot it according to the following methods:

1.Please use the official DJI charger and charging cable for charging, and it is recommended to use a 5V 2A or above charging bridge or device for handheld products.

2.If you use the charging hub to charge multiple batteries, the charging hub will charge them in order from high to low according to the remaining power;

3.The battery or handheld product body cannot be charged normally after it has just been used, and it is recommended to recharge it after it cools down;

4.The optimal temperature for charging the device is 5-40, if the temperature is too low or too high, it will not be able to charge;

5.If the appearance of the battery is cracked or deformed (bulging), the abnormal charging interface means that the battery has been damaged, please do not recharge;

6.If the battery cannot be turned on or charged due to prolonged storage, it means that the battery has been over-discharged and damaged.

If it does not belong to the above undamaged conditions, and it still cannot be charged after inspection, the battery and the whole set of charging equipment can be sent back for testing.

If your Spark battery won't charge, check the following:

1.It is necessary to confirm whether the battery temperature is too high or too low, such as a battery that has just been used, place the battery and wait for the temperature to drop before charging;

2.It is necessary to confirm whether the charging environment exceeds 5°C to 40°C;

3.It is recommended to use the original charging cable that comes standard with the device;

4.It is necessary to confirm whether the matching power adapter is compliant, and it is recommended to replace the power adapter to try charging;

5.If the battery cannot be charged due to long period of non-use, please charge the battery for more than two hours to see if it can be charged.