Huawei Enjoy 20pro how to restore factory settings

1. Factory reset will clear the personal data of Huawei Mate20 Pro mobile phone, such as **Ben, information, etc., it is recommended that the mobile phone that can be used normally use the Huawei mobile phone assistant to back up the data and then perform a double clear factory reset.

2. Keep the phone fully charged, first press the power button to turn off the phone, and then press and hold the volume up button and the power button at the same time to enter the official recovery mode, as shown in the figure below, 3. Release the power button when the boot screen appears, and then release the volume up button after 3 seconds, you can enter the recovery mode interface, as shown in the figure below, 4. The screen cannot be touched in recovery mode, so we need to press the volume up and down keys to select, and select "Factory Reset", Then the screen may prompt you to enter "yes", after entering OK, you can clear the data, or you can select "Clear cache partition"."Do it.

5. When the HUAWEI Mate20 Pro factory reset is completed, click the first item "Restart the device", and then the phone will automatically turn on and restore to the factory state, at this time, the lock screen password is also cleared!

Then you can just go and flash the phone.

Hello! Huawei Enjoy 10 This phone does not factory reset by itself. There is a high probability that there will be a system failure.

Personally, I recommend that if you have any problems with Huawei Enjoy 10, go to the Huawei official customer service center for a comprehensive inspection, or go to the customer service to reset the system. The official customer service has professional system software. And the official customer service is both safe and secure.

Some suggestions. Wish. Thank you.

If you do a factory reset, you will have no stored stuff and installed software in your phone, as well as some personal data.

There are two ways to restore the factory value, one is to restore the factory value by setting, the other is to double clear the phone, you may need the phone password through the setting, and you only need to turn off the phone and hold the power button and the volume button.

Please note that a factory reset will delete some of the data in your memory device, including your account, system settings and data, installed apps and their data, etc., in order to avoid loss of important data, please back up in advance.

Here's how to do a factory reset: Open Settings. Click Advanced Settings > Backup & Reset. Click Factory reset and, if necessary, choose whether to format the internal storage.

Hello, the method to restore the factory settings of Huawei Enjoy 20Pro is as follows:1Back up your data:

A factory reset will erase all data from your phone, so be sure to back up important data before proceeding. 2.Go to Settings:

Open the main interface of your phone and tap the "Settings" icon. 3.Select System & Updates:

In the settings interface, select the "System & Updates" option. 4.Select "Factory Reset":

In the "System & Updates" screen, select the "Factory Reset" option. 5.Confirm the action:

In the pop-up prompt box, select the "Clear All Data" option and confirm the operation. 6.Waiting for recovery:

The phone will automatically reboot and start a factory reset, this process may take some time, please be patient. 7.Set up your phone again:

After the factory reset is completed, you need to set up your phone again, including the language, network, account, etc. It should be noted that a factory reset will erase all data, including apps, contacts, and more, so be sure to back up your data. In addition, a factory reset will also erase all settings and configurations, including Wi-Fi passwords, Bluetooth pairing, wallpapers, and more, so you'll need to reset those options.

In order to pursue a larger screen and better touch, mobile phone manufacturers have gradually eliminated physical keys, and now full-screen touch is the mainstream, and we need to return to the operation through virtual navigation keys or gestures. So how to set the back button for Huawei Enjoy 20 Pro?

1. Under the settings menu, click to open [System and Updates].

2. Click to enter [System Navigation Mode].

3. Check [Three-button navigation in the screen], and the triangle button is the return button.

Note: This article applies to the Huawei Enjoy 20 Pro mobile phone EMUI system.

In this article, the HUAWEI Enjoy 20 Pro is used as an example for EMUI systems.