What is the description of the manufacturing process of aluminum alloy doors and windows?

Hello lz. The aluminum alloy process is actually very complicated. Generally, there are wind pressure resistance, appearance performance, production, installation, and practicability (different aluminum alloy doors and windows are designed according to different installation positions.) and other factors, all of which are aluminum alloy processes. ）

The decoration of everyone's home is different, and the requirements for doors and windows are not the same, and the existing door and window styles may not be able to achieve the effect in the hearts of the owners, so there are many aluminum alloy doors and windows in the home are achieved by customization. So what are the steps of the aluminum alloy door and window production process, the following name Ou doors and windows will take you to understand.

Aluminum alloy doors and windows manufacturing process.

1. Broken material. Material breaking, also known as "blanking", is the first process of aluminum alloy door and window production, and it is also a key process. Cutting equipment is mainly used for material breaking, and the length of the material should be determined according to the design requirements and referring to the construction drawings of doors and windows, and the cutting is required to be accurate; Otherwise, it is difficult to ensure the squareness of doors and windows, and the error value of material breaking size should be controlled within the range of 2mm.

2. Drilling. The assembly of the frame sash of aluminum alloy doors and windows is generally connected by screws, so whether it is the assembly of horizontal and vertical rods or the fixing of accessories, it is necessary to drill holes in the corresponding positions. Profile drilling, can be used small bench drill or electric drill, the former because there is a workbench, so can effectively ensure the accuracy of the drilling position; And the latter is because of the ease of operation.

3. Assemble. The profile is assembled with screws through the connector according to the requirements of the construction drawing. There are three assembly methods for aluminum alloy doors and windows: 45° angle butt, right-angle butt and vertical butt.

The connection of horizontal and vertical rods is generally made of special connectors or aluminum angles, and then fixed with screws, bolts or aluminum rivets.

Aluminum alloy doors and windows installation standards.

1. After the aluminum alloy sliding doors and windows are installed and fixed in the door and window frames, the doors and windows with glass are installed in the chute in the frame as a whole, and the gap with the sash can be adjusted.

2. Aluminum alloy casement doors and windows are assembled on the wall with the frame and fan lattice frame, installed and fixed, and then install the glass, that is, first adjust the gap between the frame and the fan, then install the glass into the fan and adjust the position, and finally inlay the sealing strip and sealant.

3. The aluminum alloy floor spring door should be installed and fixed in the door frame and the floor spring host before the door leaf is installed. First, the glass is embedded in the door lattice and put into place together, the gap between the frame and the leaf is adjusted, and finally the sealing strip and sealant of the door glass are filled.

Tips for door and window decoration.

1. When decorating second-hand houses or renovating old houses, the first thing to do must be to replace high-quality and low-cost doors and windows, and at the same time consider the tightness and safety of the doors and windows, so as not to be deceived by the so-called low prices and hidden consumption cables.

2. To buy building materials, you must go to the regular building materials ** and stores to buy, some doors and windows look good, but in fact, the quality is really not good, there may be fake and shoddy or imitation, you must be careful when buying.

3. When checking the door and window accessories, check whether they are genuine and whether the operation is smooth.

4. If you are installing doors and windows with sealing strips, you need to ask workers to replace the sealing strips regularly to ensure that the seals are tight and easy to replace. Secondly, because the sealing strip is made of rubber, its life is much shorter than that of doors and windows.

5. In addition to paying attention to the vertical and horizontal directions when installing doors and windows, the sealing of doors and windows must also be paid attention to. Otherwise, there is a risk of water seepage and ventilation in the windows, and the life of doors and windows may also become shorter.

In building decoration projects, the use of aluminum profiles to make doors and windows is more common. Although the size and style of aluminum alloy doors and windows are different, the aluminum profiles used in the same type of aluminum alloy doors and windows are the same, and the construction method is also the same. The following old carpentry Luban doors and windows will introduce you to the processing technology of aluminum alloy doors and windows

The processing and production of broken bridge aluminum doors and windows should be carried out in the factory, not made at the construction site, the production of doors and windows should meet the requirements of the design and installation and acceptance specifications of heat-insulated aluminum alloy doors and windows, and the heat-insulated aluminum alloy doors and windows should be installed firmly, and the doors and windows should be pushed and pulled and opened flexibly, and there should be drainage holes at the window sill, and a limiting device should be set up. Fasteners should comply with the relevant technical engineering regulations; The model, specification and performance of the hardware should meet the standard.

The processing of drainage holes on the slideway of the sliding window should follow the principle of the inner and outer holes of the inner sash and the inner hole of the outer sash to ensure the sealing performance of the doors and windows, especially the sliding windows with the horizontal direction of the lower horizontal wool strip.

Before assembling the broken bridge aluminum doors and windows, the end processing burrs should be cleaned up, and the end nodes and profiles must be combined with waterproof glue and other sealing measures to prevent water seepage of the structure.

The structural assembly of the hidden frame window must be made and maintained in the purified room. Be sure to use solvents to clean off dust, oil stains and other dirt on the surface of the glass and aluminum frame; Every time a component or piece of glass is cleaned, a clean dry cloth should be replaced; The solvent should be poured on a cleaning cloth and must not be allowed to touch the mouth of the solvent bottle. The glue injection must be full, no bubbles, leakage, and the surface of the glue seam should be smooth and smooth; The remaining glue in the glue receiving seam shall not be reused.

What is the processing and manufacturing process of zinc alloy doors and windows? You should consult the official ** of door and window processing.

Blanking - punching - assembly - gluing - packaging - installation.

It is recommended to go to a nearby aluminum alloy store for an internship for a few months. Look at how people are tidying up. Otherwise, there are too many detours.