Sometimes the mouse works, sometimes it doesn t, and after a while it works again10

What to do if the mouse doesn't move, what to do if the mouse doesn't move, first check whether your computer is installed with remote control software, such as installing a network person.

2.If it is installed, go to the settings and check the "Security Settings" option to see if "Allow the other party to control the local mouse and keyboard" and "Allow the other party to lock the local mouse and keyboard" are checked in the "Controlled Permission Settings". If you make the corresponding check, then the other party can control your mouse and keyboard operation when controlling your computer, and there will be the problem of what to do if the mouse does not move.

3.What to do if the mouse doesn't move, what to do if the mouse doesn't move, the solution is of course very simple. What should I do if the mouse doesn't move?

Solution 1: Go to "Settings" - "Security Settings" - "Controlled Permission Settings" to remove the corresponding control and lock the mouse and keyboard. What should I do if the mouse doesn't move, solution 2:

If it is not a problem with the installation of remote control software, many cases are caused by the computer crash and the mouse cannot be moved. It is recommended to restart the computer.

Whether your mouse is wireless or wired, is it a gaming mouse, or an ordinary optical mouse we use, there are many questions here, such as the brand of the computer and the compatibility of the mouse, the compatibility of the software, and so on....You'd better describe your details with me, so that you can answer.

Your mouse is short-circuited, which is the so-called power failure, if it is a professional mouse, it is good to replace the wire.

Do you need to install the corresponding driver for your mouse? General gaming mice have a dedicated mouse driver, which needs to be installed. Otherwise, you'll be in this situation. An ordinary mouse can be plugged in and used.

You see my question, the same question as yours, it took 100 points, and now I'll tell you, the quality of the mouse, just change to a new mouse, just restart it.

What kind of mouse did you just bought, what is the system, now the mouse is plug and play, plug in and restart, if it doesn't work, consider replacing the mouse.

Also, try it on another computer first.

1.Change to another computer to see if it's time to change the mouse.,2.Try it with someone else's mouse, 3Unplug the power supply and try it with only the battery.

1. First of all, you need to open the main menu of the computer and select the control panel, as shown in the figure below.

2. In the control panel, we find the hardware and sound.

3. Then we find the mouse option in the device and printer.

4. After entering the mouse properties, we click on the hardware.

5. Then check whether the hardware is normal, if not, it means that there is a problem with the mouse itself. If the display is normal, click Properties.

6. You only need to update the latest mouse driver in the driver.

Mouse malfunction generally has the following situations:

1.The keys of the mouse may have long-term aging.

2.The environment in which the mouse is used is not good, such as using it on glass, will definitely cause the mouse to jump around3If it is a wireless mouse, there may also be a battery that is out of charge4

There is still a problem with wireless mice, which is generally not easy to find, that is, some people often disable the computer's Bluetooth, once you disable your mouse, it will never be able to find the signal source!

You can give it a try and rule it out one by one.

Problems with the motherboard, too much computer dust can cause similar situations. Main manifestations: The symptoms are not obvious or frequent when the device is first turned on, and there will be obvious or frequent problems after half an hour of use.

Solution: Find a professional to disassemble the machine and clean up the dust. Too much dust can cause problems such as static electricity on the motherboard, overheating of the CPU, and overheating of the graphics card, which will directly affect the life and running speed of the computer.

Change the battery, or just change the mouse.

If your mouse fails after interlacing, it may be due to a problem with the mouse's driver or a stain on the surface of the mouse. Here are some possible workarounds: Replace the mouse:

If you're using a mouse that's aging or malfunctioning, you may want to consider replacing it with a new one. Clean the mouse: If dirt or dust is present on the surface of the mouse, you can use a cotton swab or a clean cloth to gently clean the surface of the mouse.

Please note that do not use water or other liquids to clean the mouse. Update your mouse driver: You can try updating your mouse driver to make sure it's compatible with your operating system and working properly.

Adjust mouse settings: In some cases, the sensitivity or speed settings of the mouse can cause it to fail after interlacing. You can try adjusting these settings and see if that fixes the problem.

Check the cable connection: If your mouse uses a wired connection, check that the mouse cable is properly connected to the computer and make sure it hasn't been damaged. If none of the above methods solve the problem, you can try contacting the mouse manufacturer or computer repair professional for further help.

The most common possible sex is the following:

1.The keyboard PS2 port socket on the motherboard is in poor contact, which is due to the fact that the interface is enlarged due to frequent plugging and unplugging of the mouse, resulting in poor contact. You'll need to change the plug or change the mouse to see if it improves.

2.The inside of the mouse data cable is broken, because the mouse needs to move frequently. Therefore, the place where the most movement is easy to cause breakage.

You need to find out the place where the dark break is, and then pick it up again, this requires a certain amount of hands-on ability, if you don't have the tools and experience, it is recommended to buy a new one (after all, the new one is also cheap). If the mouse is expensive, you are reluctant to throw it away easily, and you can't fix it yourself, so take it to the computer city and find someone to repair it.

Poor contact, re-plug! No, reinstall the drive.

Is there a problem with the battery?