How much is the dust bag, and how much is the dust bag recycling

The ** of the dust bag is about ten or twenty yuan per piece, and there are dozens of expensive ones. Different types of dust bags** are also different. As far as the category is concerned, the processing method is mainly divided into three types: woven filter material dust removal bag, non-woven filter material dust bag and composite filter material dust removal bag.

1. Woven filter material dust collector filter bag: use a loom to weave the warp yarn and weft yarn arranged vertically with each other according to a certain organizational law, which is represented by the letter W; 2. Non-woven filter material dust collection filter bag: without going through the general spinning and weaving process, the fiber is directly formed into a network or yarn into a layer, staggered, bonded, acupuncture, meltblown or spun into a sheet filter material, which is represented by a composite letter composed of the letter NW and the code of the specific processing method; 3. Composite filter material dust removal bag:

The dust bag filter material made by two or more methods or composed of two or more materials is represented by the letter C. 2. Fabric structure, according to the fabric structure, it is mainly divided into three types: plain grain filter material dust removal bag, twill filter material and forged filter material. 1. Plain weave:

This is a relatively simple weaving form, each warp yarn and each weft yarn alternate up and down, but the plain weave has the shortcomings of difficult to clean ash and easy to block, therefore, this weaving weave has rarely been used as dust removal filter material; 2. Twill weave: It is formed by interweaving the warp yarn on the two and four under the weft yarn at the same time, and the warp and weft yarn interweaving point gradually moves to the left or right; The twill weave is divided into single-sided twill and double-sided twill; The flexibility and elasticity of twill weaving are better than that of plain weave, the mechanical strength is slightly lower, and it is easy to be misaligned after stress, but its wear resistance is good, and the dust removal efficiency and ash cleaning effect are also good, which is a very commonly used structure of woven filter material; 3. Forging structure: according to the warp or weft seen on the surface of the fabric, it can be divided into warp forging and weft forging pattern; The forging weave is characterized by smoothness, a shiny surface, very softness, good elasticity and air permeability, and at the same time easy to clean due to the migration of the yarn.

3. The cross-sectional shape of the filter bag is mainly divided into three types: round, flat and special-shaped according to the cross-sectional shape of the filter bag. 1. Round: The dust removal filter bag is cylindrical.

Its specifications are expressed by the diameter and length, i.e. d l (mm); 2. Flat: The filter bag of the dust collector is flat, including rectangular and trapezoidal, and its specifications are expressed by the circumference and length, that is, p l (mm); 3. Special-shaped: the specifications of the filter bag with specific shapes are expressed by the characteristic parameters of its structure.

Fourth, the filtration method is mainly divided into two types: internal filter type and external filter type according to the filtration method. 1. Internal filter dust removal bag: After the dust-containing gas is filtered through the inner surface of the filter bag, the dust is blocked on the inner surface of the filter bag, and this filtration method is called internal filter; 2. Cloth bag of external filter dust collector:

After the dust-containing gas is filtered through the outer surface of the filter bag, the dust is blocked on the outer surface of the filter bag, and this filtration method is called external filter. If you want to know more about the dust bag, you can consult Jiangsu Xinquan environmental protection materials, thank you!

There is a direct relationship between the amount of money and the material of the dust bag. For example, anti-static, anti-corrosion fluorine film is not the same as ordinary ones. Generally** in. Between 10-100 RMB.

Ordinary type dust bag. **Between $10 and $50.

The high-temperature dust filter bag is slightly more expensive, some, between 30 and 100 yuan. The internal acid and alkali anti-corrosion dust removal filter bag is currently the most expensive dust removal filter bag**, generally more than 100 yuan.

Hello, the dust bag is more transparent, not very high, it is recommended to find some manufacturers specializing in the production of bags, it will be lower.

The dust bag varies from region to region and specific situation, generally ranging from 1000-6000 yuan per ton. The following is the detailed process of dust removal with high cloth bags**: Collect dust removal bags:

The company will go to the customer's site or the customer will send the used dust bag to the designated place. Preliminary treatment of dust bags: **The company will carry out preliminary treatment of dust bags, including dust removal, cleaning and drying.

This step removes dust and stains from the dust bag. Classification of dust bags: Dust bags are classified according to the model, material, use time, damage degree, etc.

Dust bag retreatment: **The company will reprocess the sorted dust bag, including surface treatment, sterilization, disinfection and ironing, etc., to make it clean and tidy. Reinforcement and Transformation:

Repair the damaged fingers of the cloth bag so that it can be reused. Sales of dust bags: The dust bags that have been treated above will be re-entered into the market for sale, or sold through export.

Profit: The company makes a profit by selling the processed dust bags, while also contributing to environmental protection and resource conservation.

Storm environmental protection, Fangyuan environmental protection, Qingtian environmental protection, Hongyue environmental protection, Jiehua environmental protection. The above manufacturers have rich production experience and good dust absorption effect, which is worth recommending.

1. Storm Environmental Protection:His bag filter has a dust concentration within tens of mg m3 of the outlet gas, and has a high classification efficiency for fine dust with sub-micron particle size. The filter material is 208 or 901 polyester velvet cloth, glass fiber filter bags treated with silicone resin, and the service temperature is up to 250 °C.

2. Fangyuan environmental protection:The characteristic of his products is that they are not sensitive to the characteristics of dust, and are not affected by dust and resistance. The void rate in the filter material is as high as 80%, which greatly improves the service life of the product.

The oil absorption is up to 12 20 times the weight of the filter bag itself, and the filter adopts a flat bag group, and each bag is equipped with a spring steel wire mesh, which has a good filtration effect.

3. Qingtian Environmental Protection:His dust bag blower, filter, and dust collector are all housed in a vertical frame, making them very convenient to use. The range of air volume is wide, the small one is only 1 min m3, and the large one can reach 1 min and tens of thousands of m3.

When using high-temperature resistant filter materials such as glass fiber, PTFE, P84, etc., it can operate under the condition of more than 200 high temperatures.

4. Hongyue environmental protection:His dust bag blower, filter, and dust collector are all housed in a vertical frame, making them very convenient to use. The outer layer is a thickened depth filter material, which is formed by hot melt spray of pure polypropylene capillary fibers.

to provide hierarchical filtration; The maximum filtration accuracy is 3um, and the collar is a plastic ring.

5. Jiehua environmental protection:His dust bag is available for nylon monofilament mesh, polyester monofilament mesh, and polypropylene multi-strand wire mesh. The cloth bag is equipped with an access door, which is convenient for maintenance and bag changing.

As a purification dust concentration of 30g nm3, particles are above the device. The dust removal efficiency can reach more than 99%.