-
Hello, the ventilation volume of the shot blasting machine strictly refers to the dust removal air volume, the shot blasting machine will clean up the attachments such as oxide scale on the surface of the workpiece during use, and produce a large amount of dust, in order to meet the environmental protection requirements, the dust will be absorbed and filtered through the dust collector, so the ventilation volume refers to the dust removal air volume, and the dust removal air volume is determined according to the equipment and cleaning workpiece requirements of different specifications and models, and the air volume can be changed by the fan power, such as "low air pressure and high air volume" or "high air pressure and low air volume" fan mode.
-
Qingdao Zongtai Foundry Machinery****.
Strictly speaking, the ventilation volume of the shot blasting machine refers to the dust removal air volume, the shot blasting machine cleans the attachments such as oxide scale on the surface of the workpiece during use, and produces a large amount of dust, in order to meet the environmental protection requirements, the dust is absorbed and filtered through the dust collector, so the ventilation volume refers to the dust removal air volume, and the dust removal air volume is determined according to the equipment and cleaning workpiece requirements of different specifications and models, and the air volume can be changed by the fan power, such as "low air pressure and high air volume" or "high air pressure and low air volume" fan mode.
-
The ventilation volume of the shot blasting machine is determined according to the power, and the simple point is related to the shot blasting machine. If you are not very familiar with shot blasting machines, that's all you can say. If you want to know the details, go to Puhua Heavy Industries to find out.
-
Is the ventilation volume of the shot blasting machine of the same model as large as possible? For example, Q378 type has 10,500 cubic meters of hours, while some manufacturers only have 5,000 cubic meters of hours. How much can they cost to manufacture? Thank you.
-
The frequency of the shot blasting machine refers to the index of the number of shots that the blasting machine can complete per minute, and the unit is Hertz (Hz). The shot blasting machine frequency is used to realize the application of continuous processing, key area processing, and a variety of batch processing. It is used in the manufacture of electrical appliances, aircraft and other vehicles, and is also used to polish special shapes and grinding clamping surfaces.
In addition, it can also be used for airtightness cleaning, removal of paints and strengthening of corrosive layers to test their tokens, cleaning, primary painting, etc.
-
Summary. The frequency of the shot blasting machine refers to the number of shots that the shot blasting machine can complete in a certain period of time, that is, the working speed of the shot blasting machine. Generally speaking, the higher the frequency of the blasting machine, the higher the blasting efficiency and the higher the blast quality.
The frequency of the shot blasting machine is usually measured in the number of shot blasting minutes, and the common frequency of the shot blasting machine is: 200 times minutes, 400 times minutes, 600 times minutes, 800 times minutes, 1000 times minutes, etc.
The frequency of the shot blasting machine refers to the number of times the shot blasting machine can complete the orange withering shot blasting machine in a certain period of time, that is, the working speed of the shot blasting machine. Generally speaking, the higher the frequency of the blasting machine, the higher the blasting efficiency and the higher the blast quality. The frequency of the shot blasting machine is usually measured in minutes of the shot blasting chain, and the common frequency of the shot blasting machine is:
200 minutes, 400 minutes, 600 minutes, 800 minutes, 1000 minutes, etc.
If the product is black, how to control the frequency and time?
First of all, it is necessary to determine whether it is because of the improper working frequency and time of the shot blasting machine, which causes the product to turn black.
The working frequency and time of the shot blasting machine in Kongzhou Town can be controlled by adjusting the shot blasting frequency and time of the shot blasting machine. Shot blasting frequency refers to the number of shot blasting per minute, and the general adjustment range is 0-120 minutes. Shot blasting time refers to the continuous positive opening time of shot blasting, and the general adjustment range is 0-30 seconds.
According to the different products, adjust the frequency and time of rough shot blasting to the appropriate range to ensure the quality of the product and the effect of surface treatment.
The culture is low, and it is popularly said.
1.First of all, adjust the solenoid valve of the pill throwing machine so that the frequency and time can be controlled within the specified range. 2.
Secondly, adjust the shot blasting pressure of the shot blasting machine to ensure that the shot blasting pressure meets the requirements to prevent the product from blackening. 3.Finally, the height is reduced, and the shot blasting angle of the shot blasting machine is adjusted so that the shot blasting angle can be controlled within the specified range to prevent the product from blackening.
Factory rules we can only move the frequency and time, the other can not swim the sail Qi move, I said the sedan socks said the understanding of frequency and time, you see what I said right? Frequency means: the higher the frequency, the more rotations.
The temperature is also higher. Time is: how long will it last for the shrine?
You are absolutely right.
How to adjust the frequency and time of product peeling? Is it time to shorten the frequency and time?
For the frequency and time of product peeling of shot blasting machine, the rental hall needs to determine Youpai according to factors such as product thickness, material and surface treatment effect. Generally speaking, when the peeling effect is good, the frequency should be lowered and the time should be longer. If the effect is not good, the frequency should be increased and the time should be shortened.
What is the peeling effect? Can our products be peeled? Don't understand your above.
Sorry, I didn't quite understand what you meant by product peeling above.
What do you mean? Either the frequency is turned down and the time is longer, or the frequency is turned up and the time is a little less.
Does it refer to casting peeling?
Generally speaking, the thicker the product, the higher the frequency and time; Conversely, the thinner the product, the lower the frequency and time.
-
Summary. Dear, I am glad to answer for you, the explanation of the frequency of the shot blasting machine is as follows: the running frequency of the shot blasting machine refers to the number of shots blasted per minute of the shot blasting machine, which is determined by the motion parameters of the shot blasting machine, and the frequency of the common shot blasting machine has a working range:
2000-5000, that is to say, the number of shots blasted per minute is between 2000-5000. In general practical application, the frequency selected is determined by the weight of the application coating (g m2), because the more the number of shot blasting, the smaller the quality of the coating particles thrown, therefore, if the coating thickness is larger, the frequency can be reduced, on the contrary, if the particle mass is small, the frequency of the shot blasting machine can be increased to achieve the coating effect.
The frequency of the shot blasting machine is explained as follows: the running frequency of the shot blasting machine refers to the number of shot blasting machines per minute, which is determined by the motion parameters of the shot blasting machine, and the common frequency of the shot blasting machine has a working range: 2000-5000, that is to say, the number of shots per minute is between 2000-5000.
In general practical application, the frequency selected is determined by the weight of the application coating (g m2), because the more the number of throwing shots, the smaller the quality of the coating particles thrown, therefore, if the coating thickness is larger, the frequency can be reduced, on the contrary, if the particle mass is small, the frequency of the shot blasting machine can be increased to achieve the requirements of the coating effect.
I wish you the Year of the Rabbit: famous, auspicious, red and purple, show your skills, cannon and red, amazing, and Malaysia take the lead!
-
Summary. Hello, the frequency of the shot blast machine refers to the number of points or particles that the shot blast machine can throw in a unit of time. Generally speaking, the higher the frequency of the shot blasting machine, the finer the particles thrown, and the better the working effect.
However, the frequency of the shot blasting machine should not be too high, because if the frequency is too high, the thrown particles will be affected by gravity and air resistance, and the thrown particles will be seriously damaged, which will affect the overall working effect.
Hello, the frequency of the shot blasting machine refers to the number of points or particles that the shot blasting machine can throw in a unit of time. Generally speaking, the higher the frequency chaos rate of the shot blasting machine, the finer the particles thrown, and the better the working effect. However, the frequency of the shot blasting machine should not be too high, because if the frequency is too high, the thrown particles will be affected by gravity and air resistance, and the thrown particles will be seriously damaged, which will affect the overall working effect.
How to adjust the frequency and time of product peeling.
Hello, the peeling performance of the shot blasting machine refers to the fact that when the shot blasting machine is blasting on the surface, because of the air flow, the pill culture is thrown away from the surface, and the shot blasting machine can not give correct feedback on the treatment process, resulting in the peeling phenomenon. Usually, adjusting the frequency and time is to adjust the working frequency and time of the shot blasting machine many times, and use different frequency and time with jujube configuration to try to get better results. In addition, it is also possible to adjust the distance between the muzzle and the workpiece and change the injection pressure to achieve a better result.
Be specific. Hello. Here are six scenarios:
1. The casting is not compacted, and there are casting defects such as cold separation, delamination, bubbles and poor alloy flow fusion on the surface. 2. The ejection speed of steel shot is too high. 3. The shot blasting time is too long.
4. The pendant method is unreasonable, unstable and bumps with each other. 5. The shape and quality of steel shot grains are poor, and they are not smooth ridge buckets. 6. Steel shots contain sharp impurities.
In the face of these situations, we should deal with them as follows: 1. The surface of the casting is dark. Sakura sells the mill to notify the die-casting process or the engineer in charge to adjust the die-casting process parameters or equipment parameters; 2. Appropriately reduce the shot blasting speed of the shot blasting machine; 3. Appropriately reduce shot blasting time; 4. Reasonable hangers are used to ensure that the castings are fixed in the shot peening process, and special fixtures can be used if necessary; 5. Buy steel shots with regular shapes; 6. Screen the steel shot or replace the steel shot.
7. If conditions permit, it can be replaced with lead shots.
Our unit regulates the frequency and time of adjustment.
Hello, this is a bit troublesome, one is not to adjust the time and frequency can be solved, it has a variety of factors.
-
Summary. 1. The natural frequencies of the blades are obtained from the modal analysis of the shot blasting machine, and the frequencies of the dynamic loads are obtained from the analysis of the dynamic load. 2. The first 10 frequencies of the shot blasting machine load are far less than the minimum natural frequency of the blade, so it is enough to use static analysis on the blade.
3. Finally, according to the influence of each design parameter of the blade on the strength of the blade, the method of improving the design of the blade is proposed.
Hello, dear, the frequency of the shot blasting machine is understood as follows:
1. The natural frequencies of the blades are obtained from the modal analysis of the shot blasting machine, and the frequencies of the dynamic loads are obtained from the analysis of the dynamic load. 2. The first 10th-order frequency of the shot blasting machine load is far less than the minimum natural frequency of the blade, so it is enough to use static analysis for the blade. 3. Finally, according to the influence of each rough design parameter of the blade on the training strength of the blade, the shot blasting machine proposed a method to improve the design of the blade.
-
No. Shot blasting machine is the core component of the shot blasting machine, relying on the shot blasting machine to eject the steel shot to the surface of the workpiece at high speed for cleaning work, more shot blasting device, which means that the greater the power consumption, in the cleaning process, the more the blasting beam of multiple shot blasting machines overlaps in a large range, resulting in the reduction of steel grit kinetic energy, affecting the quality of shot blasting, the increase of shot blasting machine, the required amount of steel shot circulation will also increase accordingly, so it is not that the more shot blasting machines, the better.
The most reasonable way is to give a professional calculation according to the size of the cleaning parts, and design the angle and quantity of the shot blasting machine according to the characteristics of the blasting machine, which can not only effectively clean the workpiece, but also save energy and reduce consumption.
Shot blasting machine is a common surface treatment equipment, which is mainly used to clean and remove dirt, oxide layer, rust and other impurities on the surface of parts, so as to achieve the purpose of improving surface quality and increasing adhesion ability. >>>More
There are two aspects to the deformation:
The device is deformed. The cleaned workpiece is deformed. >>>More
They don't know what this ID is, so they can't lift it. This type of phone may allow the original owner to lock the screen remotely and be located by satellite. >>>More
At present, there have been a number of products called LED TVs in the domestic market, such as Samsung, Sony, Hisense, etc. Compared with ordinary LCD TVs of the same size, LED TVs are staggeringly expensive - two or even five times higher. In this regard,Industry insiders said,At present, the TV with the name of LED TV on the market is not a real LED TV,It's just an LCD TV with LED backlight,In essence, it's still an LCD TV。 >>>More
MC originally meant to be a rapper, but now with the widespread use of MC, many meanings have gradually been derived, and it can also refer to people who can adjust the atmosphere, people who can speak rap and people who can host and control the audience, so now many rappers will add the prefix of MC before their stage name, which is to imply that their position is a rapper.