How to knot the belt of the trench coat looks good, how to knot the belt of the trench coat

Nowadays, people especially like to wear windbreakers, and if the bands of the windbreaker are knotted and knotted and look particularly elegant and good-looking, then the appearance of the whole person will be improved a lot.

A universal method of tying a knot with a belt.

1.Bow the right side of the belt to the left side, wrap the belt from the back, wrap the upper belt around half a circle, pass through the middle, and arrange it evenly; 2.Sweet bow, the belt is tied in a regular knot, the right belt is folded inward, the left belt is discounted, and it is passed through the right belt and neatly tidied.

Here are 4 fashionable and good-looking knotting methods.

Single-tail type. 1. Put the belt into the buckle.

2. Make a circle and pass the initial end of the belt through the buckle from bottom to top.

3. Go through the freshly made circle from top to bottom.

4. After completion, you can also freely adjust the length of the sagging part by passing through the circle just made many times.

Double-tailed type. 1. The initial end of the belt is at the top, and the belt buckle is at the bottom and crosses each other.

2. The initial end is threaded from the bottom to the top through the belt that clings to the part of the garment, and a knot is tied up.

3. Make a circle and let the initial end pass through the belt that is attached to the part of the garment from top to bottom again.

4. Let the initial end pass through the circle just made, and adjust the shape to complete.

Firming. 1. Buckle the belt to the last hole.

2. Thread the initial end through the hole on the left side of the belt to fix it.

3. Go through the part that was originally close to the innermost layer of the garment.

4. Walk through the hole on the right side of the fixed belt again.

Bow tie type. 1. The initial end of the belt is at the top, and the belt buckle is at the bottom and crosses each other.

2. Wrap the initial end of the belt around the end with the buckle and make a circle.

3. Wrap the initial end of the belt around the back of the cross and pass it through the loop from the bottom up.

4. Adjust the shape of the knot to the bow tie and you're done.

No matter what specific method of knotting the trench coat you use, as long as you make it delicate and beautiful, it will make your trench coat look more delicate and beautiful than others.

How to knot the trench coat belt looks good? It's a matter of personal preference. Some robbed in the back. Particularly chic and charming. Some are knotted in the front. Exceptionally beautiful and charming.

1.One-sided bow tie method. Thread the waistband into the garment where the waistband is placed, cross the waistband of the pants, then thread the unlocked side into the waistband and wrap it around, then tie the knot. Crisp and neat, full of capable style.

2.Diamond Tie Method. This binding method is very simple. Put the belt on, then cross it out, and finally tie a knot that we usually use. Casual and natural, easy to learn.

3.Double bow tie method. This double bow tie will be more complicated compared to a one-sided bow tie. You can tie the bow by following the steps below. The style is sweet, playful and cute.

4.Bow tie and bow tie jujube town limb method. As the name suggests, this way of wearing is similar to our usual tie. Put the tie on your belt.

5. A simple way to tie it, you can directly cross the belt around the town, and then let the belt on both sides droop naturally. Very simple. When you're in a hurry, you can tie it like this.

6.In the hemming method, one end of the strap is wrapped around the belt near the waist, and then threaded through the hole of the formed stool, which is quite distinctive.

7. Upgrade the winding method, wrap the belt around the waist twice, and then wear it out.

Here's how to tie the trench coat belt:Tool: Trench coat.

1. Leave one end of the belt short and cross the long end on top.

<>4. Wrap the other end around the folded part of the assembly, pass it through the belt, and wrap the entire fold.

5. The pulled out end is then passed through the bow-shaped hole to form a knot, which can be adjusted.

6. The key point of the technique is that during the folding process, it is necessary to fold it to the old one.

Here's how to tie a knot at the back of the trench coat belt:1. First of all, hang the windbreaker and simply tie a knot with two spike naiko crosses.

2. Then, fold one end of the windbreaker belt into two layers towards the missing key, as shown in the figure below.

3. Press the other end of the windbreaker belt on top of the folded end, as shown in the figure below.

4. Wear the end pressed on it through the back of the belt, as shown below.

5. Pull it out gently, and the bow at this time has begun to take effect and looks looser.

6. Then a little Fu people skillfully tidy up, tie the belt tightly, and the bow is tied, as shown below.

Here's how to tie a knot at the back of the trench coat belt:Tool: Trench coat.

1. First, lay the trench coat flat on the back side up, and put the short side under the long side.

2. Then wrap the short belt of the men's belt trench coat and put it under the long belt and tighten it.

3. Then the long belt goes up from under the short belt.

4. Fold the short belt in half and then wrap the long belt up from under the short belt, and the long belt can be discounted.

A guide to buying a trench coat1. Color selectionThe color of the trench coat should be chosen with your skin tone and the occasion in mind. For example, people with a fair complexion can choose a dark-toned trench coat to look mature and stable; For those with darker skin tones, you can opt for a light-toned trench coat for a fresh and natural look.

Second, style selectionThe style of the trench coat should also be chosen according to the individual's body shape and preferences. If you are tall and thin, you can choose a long trench coat, preferably below the knee. If you're slim in shape, opt for a trench coat with a cinched waist to accentuate your waist.

3. Material selectionThe material of the trench coat is also very important, and a good material can ensure the crispness of the trench coat and the smoothness of the lines. Generally speaking, we recommend high-quality trench coats made of wool, cotton, hemp, polyester and other materials, which are soft to the touch, feel good and comfortable to wear. Of course, you can also choose according to your preferences and economic situation.

As follows:

Tools Ingredients: Belts. Cavity beats with.

1. Step 1: First cross the two ends of the belt, fold one end back, and press the other head.

2. Step 2: Use the other end of the belt to bypass its front and fold the tail in half.

3. Step 3: Drill out the pinched part of the belt from the circle that was bypassed before, pull it tight, and flatten the position of the bow.

4. Step 4: Adjust the length after tying the knot, and an elegant bow will be tied with a smile.

1. Cross knots:

Pull the belt to the front first, then cross the knot once, and then cross the knot again.

<>2. Unilateral knots:

Pull the ends of the belt to one side, then cross it once, pull one end out from above, and finally tighten the belt.

3. Back knot:

Pull the ends of the belt behind your back, cross the ends, tighten the belt, hold the tail of a section of the belt, make a small loop, then wrap the other end of the belt around it, and finally tighten it.

4. Button-type windbreaker belt back knot:

Slip the belt into the buckle first, then make a loop, pass the initial end of the belt through the buckle from bottom to top, and finally pass it through the freshly made loop from top to bottom.