Tips for clamping the crane machine, how to make the crane machine clamp tighter

The tips for clamping the crane machine are as follows:

1. Quickly rotate the joystick 360 degrees, the clamp will rotate and swing, and the angle will change. When the clamp stops shaking, it's time to grab it.

2. It is a very practical technique to push the doll, such as a larger doll, or a two-headed doll like a bear and a piglet, it is best to grasp it from the body and neck of the doll, if you clamp it from the head of the doll that is sitting, the clip has no grip point, and the doll is easy to fall off.

Before starting, press the left, right, left and right, and then press twice to grasp it to adjust it tighter.

Before starting, press the left and right, left and right, and then press twice to grab, you will hear a beep, and the claw will directly recover to the fifth level of sensitivity. The crane machine is set with a sensitivity of one to five levels, one episode is the loosest, five levels are the firmest, and it will be randomly selected every time it starts, of course, the probability of randomization to level five is the lowest, and it will be restored to level five sensitivity.

Doll catching tricks

To grasp the machine with 2 layers of dolls, do not grab the machine with fewer dolls, when grabbing the dolls, aim at small places, such as the head, neck, if it is a big doll, grab the limbs, especially those dolls with embellishments on the limbs, sometimes, a flower on the big doll can be the focus point.

Observe the shape of the claws in the crane machine, the claws do not grasp if they have two claws (it is too technical), and they can grasp if they have three claws (more stable).

The trick of the crane machine clipping doll is as follows:

1. The clamps of the crane machine are generally composed of 3 pieces. When grabbing a doll, it is often encountered that the angle of the claws does not match the expectation, and when the clip falls, one of them will fall on the doll or deviate from the gripping point, so it is very important to turn the clip.

Turning the clip is actually very simple, it is to quickly turn the joystick 360 degrees, and the clip rotates and swings, and the angle will change. When the clamp stops shaking, it's time to grab it.

2. How to control the button of the doll.

Catch the doll. There is also a saying that pressing a button to drop the clip will increase the claw force when the clip catches the doll. Specifically, it is at the height of the doll 1 3 press or just hold the whole when pressed, when the clamp is completely to the end, the power of natural access is usually not enough.

Most of the machines with strong claws will be stronger if they press twice, and it is useless to press with weak claws.

It is actually useful for some machines, which can make it easier to grip by tightening the clamp at the right time.

3. Throw the clip.

This method is more difficult. First of all, the target doll should not be too close to the glass or the acrylic of the outlet, otherwise it will be knocked by the clip. After confirming that there are no obstacles next to the target doll, throw the clip left and right, let the clip swing sharply from side to side, find a good time to press the drop button, and when the claw clamps the doll to retract, it will throw the doll to the exit.

4. Roll into the hole.

This method is to let the doll clip up and fall down, and then roll directly into the hole. Generally speaking, it is easier to roll in a slope of more than 45 degrees, and it is more difficult to roll in a slope of less than 30 degrees.

The method is that when the clip falls, don't be in a vertical line with the doll, and the clip should be slightly closer to the hole, so that when the clip ** comes up, there will be a pull to the exit.

This method is suitable for machines with low opening heights. It's better to be the kind of machine with a lot of dolls.

1. Observation.

Every time you go to the crane machine, it is not for no purpose to put coins to clip, so most of them can not be clipped, observe which crane machine is clamped, and leave without clipping. Such, you can go on.

Another way, that is, if someone else is holding the doll you want, don't clip it. Because 99% of the crane machines like this are programmed, as long as one is clamped, the program will start from scratch. Unless you fill in the coins from scratch.

Or, you're lucky, the clip hangs on the rope, this kind of shit luck.

2. Determine the location.

You can press the button next to the joystick to lower the claw, and when you go down the claw, you have to press the button again to see the claw reach the doll's body or half of the head (this is the key, and it is also the direct reason why many people grab the claw and release it), and then the claw will come up with the doll, you just have to wait.

Tip: The second press is to increase the power of the claw, and the reason is that you know the fundamental difference between pressing once and twice.

3. If the doll you catch is near the exit of the baffle, as long as you catch the doll within 3 times according to what I said, you will definitely be able to come out, if the doll you want is far away.

It's repeated a few times like this, but it's just a process of moving the doll slowly, moving little by little, and when it comes to the exit of the baffle, there must be a doll within 3 times.

The skills of the claw machine include the selection skills of the claw area, the skills of the predecessors planting trees and the skills of the later people enjoying the shade and so on.

1. Clip doll area selection skills.

Each crane machine can be divided into many areas. Of all the areas, the success rate is highest near the entrance of the cave, and it is close to the water. Next to the hole, basically as long as the clip can be clamped up and lifted into the air, the success rate is very high.

So first of all, you have to see if there is a doll in a good position around the hole of this crane machine. If not, look at other areas.

2. After the predecessors planted trees, this noisy people enjoy the cool skills.

The meaning of this skill is that when you arrive at the scene of the crane machine, don't blindly start clamping. In fact, the popularity of this kind of machine is generally very high, and there are many people around the machine, and there are a lot of people playing and watching. If you're going to play with this machine and the person in front of you happens to have one in front of you, 99% of the time you can give up, unless you want to waste money.

How do the claws of the crane gripper open and close?

The claw of the crane machine is controlled by an electromagnet, and there is an electromagnetic magnetic switch on it, which is open when it is not energized, and it closes as soon as it is powered on.

Before pressing the button, the paw movement is controlled by the slider, and the left and right movements. When the button is pressed, the paws will begin to descend, and when they descend to a certain height, the claws will close. When the claws are closed, they begin to rise and return to their original position, and when they return to their original position, the claws begin to loosen.

This is done until the sensor presses the button and gives the command.

The force with which the gripper retracts and spreads is determined by the electromagnet mounted in the palm of its hand. The strength of the magnetic field generated by the electromagnet depends on the magnitude of the current. If the voltage is artificially lowered, the current will inevitably become weaker, causing the magnetic force of the electromagnet to decrease, which will weaken the strength of the gripper, that is, the player's mouth will become looser.

Therefore, as long as the operator of the crane machine adjusts the voltage, he can achieve the so-called strong grasp and weak grasp.

The operation skills of the crane machine: choose a good crane machine, look at the tension of the claws of the crane machine, use the strong grip correctly, choose the doll close to the hole to clamp first, and choose the position of the doll.

1. Choose a good crane machine

There are some dolls, which are lined with cassia seeds, and the center of gravity is difficult to fix, and the crane machine like withering is definitely not the first choice. At present, some businesses are ingenious - use the crane machine to catch cigarettes, the doll is made of cloth, and the cigarettes are made of cartons, the surface of the cigarette is much more slippery than the crane machine, if the crane machine is used to catch cigarettes, it is much more difficult.

2. Look at the tension of the claws of the crane machine

Many crane machines have a hard time catching dolls because the claw tension is too great. Some of the crane machine itself is very tense, when the doll has not moved before it falls off, if you want to catch a doll, then you must be optimistic, loose claws of the crane machine do not play. You can watch others play and judge the tension of the machine's claws.

3. Use the strong grip correctly

The strength of the claws of the crane machine can be set, and generally a strong grasp will occur after several weak force grabbing. Each machine is designed differently. You can play it a few times by yourself and calculate the approximate probability. When grabbing strongly, try to catch the doll as much as possible.

4. Choose a doll close to the hole to clip first

When the crane machine grabs the doll, it will move to the hole. Judging from simple common sense, the closer to the hole, the higher the probability of being caught. You can choose those more obvious crane clamps next to the hole.

5. Choose the location of the doll

A lot of friends like to scratch the hands and feet of dolls, which is not right. The gravity of the doll is concentrated in the center, and if it is not pinched, then there is a high probability that it will fall off.

The tips for clamping the crane machine are as follows:

Tip 1: Clip the doll area selection. Each crane machine can be divided into many areas. Of all the areas, the area near the cave entrance has the highest success rate! It's close to the water.

Next to the entrance of the cave, basically as long as the clamp rock hengsan can be clamped up and rise into the air, the success rate is very high. First of all, you have to see if there are dolls with good positions around the hole of this crane machine. If not, look at other areas.

Skill 2: The predecessors planted trees, and the descendants enjoyed the shade This skill means that when you arrive at the scene of the crane machine, don't blindly start clamping. In fact, the popularity of this kind of machine is generally not high, and there are many people around the machine, and there are a lot of people playing and watching.

This is when you have to observe that if you're going to play with this machine, and the person in front of you happens to have one in front of you, then 99% of the time you can give up, unless you want to waste money.

Skill 3: It is best not to grasp the machine with few dolls First of all, this trick is for the conventional crane machine, and the size of the doll is about 20-30 cm in height and length. The oversized or extra-small ones are out of the discussion.

Tip 4: Smooth material doll carefully grasp This skill involves the problem of the doll's external materials. In fact, it is very simple, some relatively smooth fabrics, such as silk type, this kind of material itself is relatively smooth, even if the clip is clamped, considering the tightness of the clip, it may be slippery, so if you think this thing is particularly smooth, then be careful.