How to quickly remove limescale from a kettle

Tricks. 1. Use vinegar.

It is more common to use vinegar to remove limescale from stainless steel kettles. Because the main ingredient in limescale is calcium carbonate, it can react chemically with acetic acid in vinegar to produce minerals and carbon dioxide gas, which is also the principle of using vinegar to remove scale. The specific method is also very simple, that is, pour white vinegar or vinegar (the effect of white vinegar is better than vinegar) into the kettle, the dosage is 10% of the scale of the kettle, then add water to boil, let it stand for an hour and then wash, you can easily clean off the scale in the electric kettle.

Generally, after a few more attempts, you can completely clear the scale on the kettle.

Tricks. 2. Tea.

You can also make full use of the leftover tea leaves to clear the scale in the electric kettle, by pouring the tea residue and hot water into the electric kettle, shaking it a few times, and leaving it for half an hour, after which the scale will naturally fall off. The principle is to use theophylline to remove scale.

Tricks. 3. Baking soda.

Baking soda is also a little helper to remove limescale from electric kettles. Boil a pot of boiling water in an electric kettle, add a spoonful of baking soda after the water boils, and then boil for a few more minutes to remove the scale. Or pour 500 grams of baking soda with a concentration of 1%, shake the electric kettle, and the scale can be removed immediately.

Tricks. Fourth, potato skins.

If the limescale in the kettle is thin, you can remove it by adding potato skin. Put the potato skins into the kettle, then add water and boil, boil for about 10 minutes, and the thin scale in the stainless steel kettle will go out.

Tricks. 5. Sweet potatoes.

Few people should know the method of removing limescale from sweet potatoes, but this method is very good and can be done once and for all. The newly bought stainless steel kettle is best with this method. Put more than half a kettle of sweet potatoes in the kettle, then fill it with water and cook the sweet potatoes.

In the future, it will not be easy to scale when boiling water in a kettle, but it should be noted that after boiling sweet potatoes, the inner wall should not be scrubbed, otherwise it will lose its descaling effect. If it is an old electric kettle that has accumulated limescale, it will take one or two times to remove the scale with sweet potatoes before the scale will gradually fall off, and then it can also prevent the limescale from accumulating again. This method is good, you can give it a try.

Tricks. 6. Eggshells.

The egg shell can also remove scale, after the egg shell is broken, put it in the electric kettle, add a little detergent and an appropriate amount of water, block the mouth of the kettle with a bottle stopper, rotate and shake, and then rinse it with clean water, and soon the scale in the stainless steel electric kettle can be rinsed clean.

Thank you.

If the kettle is used for a long time, there will be a layer of white scale inside the kettle, which is not easy to clean. Try filling a pot of strong salt water and vinegar before going to bed at night, and brush it with a steel brush and some dish soap the next morning. The scales fall off easily.

There are several simple and easy-to-do methods. You can also try it.

Put the sweet potatoes in a pot and boil to remove limescale. Put more than half a pot of sweet potatoes in a new kettle, fill it with water, cook the sweet potatoes, and boil the water later so that there will be no limescale accumulation. However, it should be noted that after the potatoes are boiled in the pot, the inner wall should not be scrubbed, otherwise the descaling effect will be lost.

For the old kettle that has been full of limescale, after boiling it once or twice with the above method, not only will the original scale gradually fall off, but also play a role in preventing the scale from accumulating again.

Baking soda descaling When boiling water in an aluminum kettle with limescale, add 1 teaspoon of baking soda and boil for a few minutes to remove the scale.

Boil the eggs, remove the scales and bring the water to a boil. Over time, limescale is difficult to remove. If you boil eggs twice with it, you will get the desired results.

Potato peel descaling aluminum pot or aluminum pot will have a thin layer of limescale after being used for a while. Put the potato skins in, add an appropriate amount of water, bring to a boil, cook for about 10 minutes, and remove them.

Scales are removed by thermal expansion and contraction. Place the empty kettle on the stove to dry the water in the limescale. When there is a crack or pop in the bottom of the pot, remove the pot and quickly fill it with cold water, or wrap the handle and spout with a rag and hold it with both hands and quickly sit the dry pot into the cold water (do not let the water pour into the pot).

Repeat 2 to 3 times, and the scale at the bottom of the pot will fall off due to thermal expansion and contraction. (Be careful with this!) )

Remove limescale with vinegar. If the kettle has limescale, put some vinegar in the water and boil for an hour or two to remove the limescale. If the main ingredient in limescale is calcium sulfate, you can pour the soda solution into a kettle and boil it to remove the limescale.

Masks to prevent limescale build-up. Put a clean mask in the kettle. After the water is boiled, the limescale will be absorbed by **.

If you want to quickly remove limescale from the kettle, you can add it to the kettle and add some cooking vinegar. After soaking for a while, the limescale in the kettle will come off.

Teach you how to quickly remove limescale from an electric kettle.

Teach you how to quickly remove limescale from an electric kettle.

After the kettle has been used for a long time, there will be large limescale on the inner wall, so how to deal with it to clean it? Today I will teach you a little trick to remove it easily.

The scale of the kettle is very troublesome to clean up, teach you a trick, and it will fall out automatically.

How do you remove limescale from a kettle? Star Awareness Project

The method of removing limescale with vinegar is relatively common, and the specific method is also very simple, first pour white vinegar or vinegar into the container that needs to be removed, and then add water to boil. In addition, you can also use tea, baking soda and other methods.

Each of us should have a kettle at home, it is very convenient to boil water, we also want to drink as much as we want, and we will not be cold because we can't finish drinking, but our kettle often appears layer by layer of east and west, so what is that thing? It is scale, scale is due to some containers in contact with water will produce a thick layer of impurities after a long time, these impurities will always remain on the kettle, it is not easy to clean off with water, some people with cleanliness must be very unbearable this, if you know that there is such a layer of things in the water you drink, you will try to remove the scale, in fact, it does not take a lot of effort to remove the scale, so what is the best way to remove the scale in the kettle?

Method 1: Put the vinegar into the kettle, then fill it with water, boil it and leave it for about an hour, then brush.

Method 2: Put an appropriate amount of baking soda in a kettle, then boil for a few minutes, then rinse.

Method 3: Break the eggshells of the two eggs a little bit, put them in a pot, boil half a pot of water, stir quickly with chopsticks, pour out the eggshells after half an hour, and wash them several times.

Method 4: Take a lemon out and cut it into slices, put the lemon slices into a kettle and boil, let it sit for half an hour, and then wash it with water.

There are many ways to clean scale, we just need to find the most convenient method for ourselves, and the material for removing scale is also a very common thing, in fact, sometimes there will be water in the kettle, other things that boil water will also have, we can also use the same method to remove scale.

The scale in the kettle can be removed by white vinegar + water, cola, scale remover, etc., and the specific operation method is as follows:

1. Pour an appropriate amount of white vinegar and water into the kettle with scale, and then soak for 1 hour.

2. After soaking, bring it to a boil, and then scrub the scale with a rag.

Scale remover:Specialized limescale removers can be purchased online, as long as you follow the instructions for the remover.

Coke:Coke is a common drink, go to the store and buy a bottle of Coke, then pour the Coke into a limescale kettle and wait for a while.

The above is today's very heartfelt sharing, you can choose a method to remove the scale in the kettle. We must not be lazy and regularly clean up the scale in our kettle to ensure the health of our drinking water.

The stone can be soaked in a three-percent oxalic acid solution.

Oxalic acid is a complexing agent, its role is a reducing agent and bleaching agent, generally cleaning stones with alkaline substances, such as precipitating calcium, magnesium ions, and the surface attachment of the stone is basically silicon, calcareous, you can use pH test paper to measure the acidity and alkalinity of the stone skin, if it is alkaline, you can use three percent oxalic acid solution to soak the stone in, while observing the reaction, the general alkaline rust sand bubble can be removed.

The way to clean the limescale in the kettle is relatively simple, we can break the tomatoes or rotten tomatoes, and then put it in the kettle and soak it in 1:1 water for half an hour, and the inside of the kettle will disappear.