How to remove limescale from the kettle

1. Vinegar to remove scale.

Vinegar, which is commonly used in our lives, is an acidic substance. Not only can it remove limescale well, but also relatively clean and hygienic.

When there is limescale in the kettle, according to the amount of limescale, add an appropriate amount of vinegar and a certain amount of water to ensure that the mixture of water and vinegar will submerge the scale in the kettle, and then heat, boil, and soak the water. Generally, after half an hour to an hour, the indoor water is cold, and the scale in the kettle will basically dissolve into the water.

Drain the water and wash the kettle with clean water. If the first wash is not clean, you can repeat the above steps several times until it is clean.

2.Coke removes limescale.

Drinking soda and cola every day can also remove dirt. Specifically, take a bottle of Coke, pour it into a kettle with limescale, try not to dilute it, then heat the kettle and boil it directly, preferably for a while, the limescale will dissolve in the cola solution, and then pour the cola out.

If the limescale is too thick, you need to soak it for a while, and when the limescale becomes soft, you can brush it off with a cleaning ball. Finally, wash the kettle with clean water.

3. Special scale cleaning agent to remove scale.

There are specialized descalers on the market today. To buy food grade, its composition is mainly citric acid. Pour an appropriate amount of detergent into the kettle, then add clean water, heat the kettle, boil, and soak for a while. Removal is the best.

Here it is important to note that the ratio of limescale cleaner is generally 1:20. Don't use too strong ones, as too strong acids can corrode metal bottles. Especially aluminum kettles, special attention should be paid to.

Descaling principle. Removing limescale from a pot is not complicated. By following the above three methods, you can completely remove the limescale in the pot and find a pot that is as bright as new. A common feature of all three methods is the use of edible acids for descaling, which requires heating and soaking.

The process is the same, but the acid used is different. This is mainly based on the principle that scale reacts with acidic substances. In fact, there are many ways to clean limescale in life, such as lemon slices, sour pears, etc. , which can be boiled in a kettle.

Tips for removing limescale in the kettle: vinegar to remove scale, cola to remove scale, special limescale cleaner to remove scale.

1. Vinegar to remove scale.

Vinegar, which is commonly used in our lives, is an acidic substance, which can not only remove scale well, but also be relatively clean and hygienic.

The kettle has scale, according to the amount of scale, add an appropriate amount of vinegar in the kettle, and add a certain amount of water to ensure that the mixture of water and vinegar submerges the scale in the kettle, and then heats it, boils the water, and soaks it, generally half an hour to an hour later, when the water in the house is cool, basically the scale in the kettle will be dissolved into the water.

Pour out the water and clean the kettle with clean water. If it is not cleaned at one time, you can repeat the above steps several times until it is clean.

2. Cola removes limescale.

Daily drinking soda and cola can also remove limescale. The specific method is to take a bottle of Coke, pour it into a kettle with scale, try not to dilute it, and then heat the kettle, you can boil it directly, it is best to boil it for a while, the scale will dissolve in the cola solution, and then pour the cola away.

If the scale is too thick, you need to soak it for a while, and then when the scale becomes soft, you can use a cleaning ball to brush it off. Finally, wash the kettle with clean water.

3. Special scale cleaning agent to remove scale.

At present, there is a special scale cleaner on the market, and to buy edible grade, its ingredient is mainly citric acid. Take an appropriate amount of detergent and pour it into the kettle, then add water, heat the kettle, boil, soak for a period of time, and the removal effect is the best.

Here you should pay attention to the proportion of scale cleaning agent, generally 1:20 is OK, do not use too thick, too strong acidity will have a certain corrosive effect on the metal kettle. Special attention should be paid to aluminum kettles, in particular.

Principles of scale removal

The removal of scale in the kettle is not complicated, according to the above three methods, the scale in the kettle can be completely removed, and a bright kettle is as bright as new. One of the commonalities of these three methods is the use of food-grade acidic substances to remove scale, which requires heating and soaking in the process.

The process is the same, but the acids used are different. This is mainly based on the principle of the reaction between scale and acidic substances. In fact, there are many ways to clean scale in life, such as lemon slices, sour pears, etc., boiled in a kettle can have the effect of cleaning scale.

Teach you how to quickly remove limescale from an electric kettle.

After the kettle has been used for a long time, there will be large limescale on the inner wall, so how to deal with it to clean it? Today I will teach you a little trick to remove it easily.

How do you remove limescale from the inside of a kettle? Let's take a look.

The scale of the kettle is very troublesome to clean up, teach you a trick, and it will fall out automatically.

How do you remove limescale from a kettle? Star Awareness Project

The more limescale there is in the kettle, the more likely it is to grow bacteria. Not only that, but limescale build-up on the walls of the kettle will also cause fuel loss. Let's take a look at how to remove limescale.

First, vinegar scale removal This method is the simplest and most practical method, we all know that the main component of scale is calcium carbonate and other carbonates, the acetic acid in the vinegar will react with it, producing minerals and carbon dioxide gas dissolved in water, the general supermarket can buy white vinegar, put in the kettle scale of 10 white vinegar, and then fill with water, boil for about an hour, and then brush it, aged vinegar can also, but the effect of aged vinegar is not as good as white vinegar. 2. Boiled yam in the electric kettle to remove scale In the new electric kettle, put more than half a kettle of yams, fill up with water, cook the yams, and then boil the water in the future, so that there will be no scale. However, it should be noted that after boiling the potato, the inner wall should not be scrubbed, otherwise it will lose its descaling effect.

For the old kettle that has been full of limescale, after boiling it once or twice with the above method, not only the original scale will gradually fall off, but also can play a role in preventing the accumulation of scale. 3. Baking soda to remove scale When the electric kettle boils water, it is easy to form scale, generally we can put 1 teaspoon of baking soda, boil for a few minutes, and the scale will be removed. Or you can pour about 500 grams of baking soda with a concentration of 1%, shake it gently, and the scale can be removed.

Fourth, boiled eggs to remove scale general electric kettle, with a long time of hard and difficult to remove the scale, such as boiling eggs twice with it, will receive the ideal effect, the two egg shells slightly broken, put into the bottle, and then fill in half a pot of water, stir with a blender or spoon, and then boil, leave for about half an hour, pour out the eggshell, and then wash twice with water.

When boiling water in an aluminum kettle with limescale, put 1 teaspoon of baking soda and boil for a few minutes to remove the limescale.

If the kettle has scale, you can put a few evenly vinegar into the water, boil for one or two hours, and the scale will be removed. If the main ingredient in the scale is calcium sulfate, the soda ash solution can be poured into the kettle and boiled to remove the scale.

The kettle of boiling water is hard and difficult to remove after a long time. If you boil eggs twice with it, you will get the desired results.

Here are some tips for removing limescale from your kettle1. Lemon limescale.

Lemon is the most common fruit in daily life, we can take a lemon and chop it, then pour about one-third of the judgment water into the kettle, put the chopped lemon into the kettle and boil it with the water, when the lemon is soaked in the water for a period of time, the water is poured out. At this time, we will find that the limescale in the kettle has been removed, and there is a smell of lemon in the kettle.

2. Vinegar to remove scale.

Vinegar is an indispensable condiment for every household. In addition to seasoning, it has many wonderful uses in life. The main component of limescale is a calcium and magnesium compound that is insoluble in water.

If there is limescale in the thermos, you can soak vinegar to remove it. The principle of vinegar scale removal is that acetic acid can react with insoluble calcium, magnesium salts and alkalis in scale to form soluble acetate, so as to achieve the purpose of removing scale.

3. Baking soda to remove scale:

Baking soda is also a small mountain sail helper to remove limescale from electric kettles. First use an electric kettle to boil a pot of boiling water, put a spoonful of baking soda after the water boils, and then boil for a few more minutes to remove the scale. Or pour 500 grams of baking soda with a concentration of 1% and shake the electric kettle to remove limescale.

Tips for removing limescale from a kettle include lemon, baking soda and egg shells.

1. Lemon

Lemon has a strong effect on removing limescale. Put the cut lemon in the kettle, boil the water by hand, after boiling the water several times, the scale will naturally fall off, and this method can also remove the odor in the electric kettle.

2. Baking soda

Baking soda is not only a small assistant in the cooking process, but also effective in cleaning limescale in electric kettles. Boil water in an electric kettle, add 2 tablespoons of baking soda, let the water boil for a few minutes, and soon the limescale will come off automatically. You can also take an appropriate amount of baking soda and mix it into a paste with water, and rub the cloth stained with baking soda in the place where there is scale in the electric hot water tung vertical mu pot, and the scale will be removed soon.

3. Egg shells

The egg shell can also remove scale, because the egg shell is rich in calcium carbonate, which can change the electronic valence of the calcium in the scale, so that the scale is dissolved, and the egg shell is very hard, which can be fully rubbed to scrape off the scale. Boil the egg shells twice in a kettle and clean the kettle with clean water.

Generation of limescale in electric kettles:

The main components of boiling scale are calcium carbonate and magnesium hydroxide, which are calcium ions and magnesium ions in hard water that react and precipitate in the process of water being boiled, and accumulate in the electric kettle to become a thick white scale.

Limescale is a substance that is misunderstood as "rusty" when everyone uses an electric kettle. Therefore, it is normal for the kettle to have scale, and it is enough to remove the scale regularly.

The scale in the kettle can be removed by white vinegar + water, cola, scale remover, etc., and the specific operation method is as follows:

1. Pour an appropriate amount of white vinegar and water into the kettle with scale, and then soak for 1 hour.

2. After soaking, bring it to a boil, and then scrub the scale with a rag.

Scale remover:Specialized limescale removers can be purchased online, as long as you follow the instructions for the remover.

Coke:Coke is a common drink, go to the store and buy a bottle of Coke, then pour the Coke into a limescale kettle and wait for a while.

The above is today's very heartfelt sharing, you can choose a method to remove the scale in the kettle. We must not be lazy and regularly clean up the scale in our kettle to ensure the health of our drinking water.

1. The first step is to prepare a bag of baking soda powder first, as shown in the picture below.

2. In the second step, put an appropriate amount of morning water in the kettle, add baking soda, and boil the water, as shown in the figure below.

3. The third step is to boil the water in the kettle water, as shown in the figure below.

4. Finally, brush the kettle with a brush, as shown in the figure below. Missing pins.

If you want to quickly remove the scale in the kettle, you can pour vinegar into the kettle, use vinegar to decompose the scale, you can also add lemonade or lemon peel to the kettle, and heat the kettle, you can remove the scale, you can also put potato peel and water into the kettle, and heat, boil the water to remove the scale.

1. Vinegar descaling

If you want to quickly remove limescale from the kettle, you can use vinegar treatment. First of all, you need to pour vinegar into the kettle, submerge the bottom of the kettle, then plug the kettle into the heat, wait for the water to boil, let it stand for five minutes, pour the vinegar in, and use clean water to remove the scale.

2. Lemonade descaling

If you want to quickly remove limescale from the kettle, you can also use lemonade treatment. First of all, you need to add lemon juice and lemon zest to the kettle, then add water to the kettle and plug it into a boil, wait for the water to cool, pour it out, and wipe the inside of the kettle with a wet towel to wipe off the scale.

3. Descale the potato skin

If you want to quickly remove limescale from the kettle, you can also use potatoes. First of all, you need to wash and peel a potato, put the potato skin into the kettle, add water to boil, let it stand for half an hour, then pour out the potato peel and water, and use a paper towel to wipe the inner wall of the kettle.