What s the matter with the electric kettle powered on but not heated

Reasons why the kettle does not heat up when it is energized:

1. Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to automatically disconnect from the power supply, or connect the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet, so that the power failure or power on can not be normal;

2. If the electric kettle is energized and the heating plate is not heated, this fault should consider what material the electric kettle is. If it is a plastic kettle, it is generally enough to replace the heating plate directly; However, if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the stainless steel body is welded and there is no way to replace it.

How to buy an electric kettle:

1. The electric kettle is an electrical appliance with water, and special attention should be paid to its electrical performance when purchasing to ensure that there is no leakage.

2. The interface between the heater and the body of the pot should be installed firmly, sealed well, and there should be no water leakage. It can be purchased with a light hand.

Gently toggle the heater to check whether the assembly is firm and there should be no loosening.

3. The connection between the power lead connector and the body of the pot should be reliable, the tightness should be appropriate, and the assembly and disassembly should be flexible.

When purchasing a fully automatic electric kettle with an air pressure water supply device, you should check whether the boiling water ** buckle pin switch is flexible;

The pressure of the boiling water ** button should not be too large; The assembly and disassembly of the outer cover, inner cover, and inner tank should be flexible and convenient, and the sealing performance should be good.

It is very likely that the heating wire of the heating tube is broken, because the indicator light and the electric heating pipe are connected in parallel in the power supply circuit, and the indicator light shows that there is electricity, indicating that there is no problem with the power supply circuit, then it may be an open-circuit fault such as a broken wire of the heating pipe or a power-off connecting wire, you can open it and check it carefully.

The electric kettle is powered on and does not heat? Most of the time it's broken here, poke it back to normal, it's too practical.

Since many people use the health pot for the first time, they are not very clear about its specific use method, so what is the matter with the health pot light fully lit but not heated? PChouse will take you to find out. 1. The indicator light of the health pot is on, indicating that the power supply line is normal.

The reason for not heating may be that the heating plate is burned out, the wiring is damaged, or the heating element is disconnected. 2. Look at whether the switch of the health pot has heating adjustment, if there is no heating adjustment, this situation is that the switch is broken. When the switch is broken, the indicator light is still on, because the indicator light is on only to know that there is a power supply that does not drive the heating pipe and the switch needs to be turned on the heating pipe, so you can't see the obvious reason for not heating.

It is recommended to send it to the maintenance office for repair, if it has been used for a long time, it is recommended to replace it with a new one, which is more cost-effective.