I want to reboot after shredding files in the computer and crashing, but why doesn t it come halfway

Updated on number 2024-08-07
21 answers
  1. Anonymous users2024-02-15

    1. Try to boot up, after a complete computer brand, press F8, Safe Mode, Cursor Selected: Last correct configuration, Enter, Enter, press Down! [Critical step].

    2. If not, enter safe mode, press enter, and after going to the desktop, antivirus software, carry out full antivirus!

    Quarantine" stuff, completely removed!

    3. Reuse: 360 security guard, in the "function encyclopedia": "360 system first aid kit", point: start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

    System Repair, Select All, Fix Now! [Critical step].

    Network Repair, Start Repair, Restart PC!

    360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

    Kingsoft First Aid Kit, Check: [Extended] Scan, Scan Now, Process Now, Restart Computer!

    4. If not, unplug the graphics card and memory, eraser eraser, then use a brush, clean the slot dust and fan, replace the memory slots, etc! [Desktop].

    Uninstall the redundant only one, because the same kind of software, incompatible with each other to leave! [Critical step].

    7. If that doesn't work, you need to "One-click Restore" or "Reinstall System" too!

    8. Hardware Issues, Fix!

  2. Anonymous users2024-02-14

    NTLDR is Missing The boot file of the system is missing, redo the system, or use PE

  3. Anonymous users2024-02-13

    Without. Check whether the computer power supply is powered first (there is a power indicator at the power supply behind the general desktop, which is green.) After the laptop is powered on, there are also on or under the operation panel, red or blue light), make sure that there is a power background machine, open the case, and see if the power light on the motherboard is on, if it is not lit, it may be a problem with the motherboard, if it is on, check whether there is a problem with the switch button.

    It is recommended to install hardware monitoring software such as Master Lu or 360, always pay attention to whether there is overheating, and regularly clean up the dust of the hardware.

    It is best to prepare a system CD or make a U disk to start when the computer can't be turned on, and start the U disk production can be searched on the Internet. Solve it yourself!

    It is recommended that you check the heat dissipation of the machine first.

    See if there is a hard disk and if there is any abnormality, just use it if you have nothing to do.

    Top data recovery software to restore oh, thanks.

    You can go into safe mode with the next 360 first aid kit and see if it works. If that doesn't work, then redo the system, and if the problem persists, format your hard drive and redo the system.

    If you have set up auto-save, CDR will save backups, but the content of the saved backup file is not necessarily the file displayed in the CDR file when you force the shutdown, and some operation records may be lost.

    Consider backing up your files and reinstalling your system.

    If the computer can't be turned on anymore, and you can't even enter the safe mode, it is recommended that you reinstall the system.

    There was no choice but to reinstall the system.

    It shouldn't be recovered, and it may be that the hard drive is broken.

    Beg. **And install the data recovery software finaldata cracked version (note not to put this software** and install it under the disk where the files were lost, be sure**and install it on other disks) Start this software You want to find that disk and put that disk on the checkmark Enter on it, this software will automatically search for all files deleted If you find more files, don't save them to the disk where you lost your data, save them to another disk, and then put them on the disk where you lost your files When all the files are retrieved, you can put them on the disk where you lost your files.

  4. Anonymous users2024-02-12

    I guess the system files shredded it for you. It is recommended to give it a try.

    1. Restart the computer, press the F8 key as soon as it appears, select "Last Correct Configuration" and press Enter.

    2. If the "last correct configuration" does not solve the problem, choose to enter the safe mode, use 360 or other software to repair the system files, and check for viruses and Trojans.

    3. If it can't be repaired, you can enter the safe mode for system restoration.

    4. None of the above methods work, it is recommended to reinstall the system.

  5. Anonymous users2024-02-11

    The system files placed in the C drive are generally the system files, and the system will not be able to boot due to the lack of files after deleting and shredding.

    When it can't be turned on, it must be reinstalled to answer the system:

    1. Optical drive reinstallation: Install the disc with Microsoft Windows, click [Install Now], select [Custom Installation], select the disk that needs to be installed, if it is overwritten and reinstalled, click Install directly; If it is a complete reinstallation, select [Format] and then install it.

    2. If there is no Windows installation CD, you can also use a USB flash drive to reinstall: **A Windows system ISO image file guess selling, and then use [UltraISO] to burn to the USB flash drive (note: this will empty all files in the USB flash drive, please pay attention to the backup spike teasing) Select the USB disk in the BIOS settings to boot, you can install it like a CD-ROM drive reinstallation.

  6. Anonymous users2024-02-10

    You'd better reinstall the system or use a system repair tool to repair it.

  7. Anonymous users2024-02-09

    System Restore or Redo System!!

  8. Anonymous users2024-02-08

    First. Caused by hardware problems, poor heat dissipation, excessive dust in the computer, overclocking CPU settings, bad sectors in the hardware, loose memory modules, etc.

    Second. There is too little space left on the hard disk or too much debris.

    Third. Virus Trojans are the cause of frequent computer crashes: Virus Trojans damage system files that cause computers to crash frequently. It also tampers with desktop icons, and adds a lot of favorites to the browser that can't be deleted. The browser's home page for the desktop is locked.

    Fourth. When using the beta version of the software, pirated software, due to the application software is purely addictive to some bugs or the program is unstable, resulting in incompatibility with the system and resulting in computer crashes.

    All of the above can be caused.

  9. Anonymous users2024-02-07

    First soft and then hard, repartition and install the genuine system to try, otherwise it is a compatibility problem with the host accessories!

  10. Anonymous users2024-02-06

    Let's see if there's a problem with the heat dissipation of the book.,Is the fan loud? Use Master Lu to measure the temperature, the temperature may cause you to do this. You can clean the soil under the fan and the heat vents.

    Let's see if it's going to be a little better. It may also be that there is a problem with the system, so try the system without redoing it.

  11. Anonymous users2024-02-05

    1. If you press the power button of the host, the power light will not light up or turn off when it is on, replace the switching power supply first.

    2. If the power light is on after replacing the switching power supply, but it still can't start, press the num lock key, the num lock light will not light up, this situation is generally the motherboard can not start normally. Please shut down, take out the memory, clean the memory gold finger, and then plug it back in.

    3, and then check the graphics card, clean the gold finger of the graphics card, reinsert the motherboard, and then try to boot the computer, if the keyboard light is on after booting, press the num lock key, the corresponding light will also be on, which is basically a problem with the graphics card.

    4. If the screen is still black, but the display can be normal if you change to another monitor, the display of the trapped cavity is damaged and needs to be repaired. If the same is true after replacing the monitor, try to replace the graphics card, if the ruler and replace the graphics card are normal, the graphics card is damaged and needs to be repaired or replaced.

    5. If it is just that the system cannot boot, there is an error or a blue screen, it can be solved by using the new installation of the original system heavy ruler shirt.

  12. Anonymous users2024-02-04

    Need to reinstall the system!

  13. Anonymous users2024-02-03

    If the boot speed is too slow, it may be that there are too many startup items loaded, which do not match the computer configuration, making the computer run slowly.

    You can take a look at the startup items to reduce some unnecessary startups.

  14. Anonymous users2024-02-02

    Maybe there are too many files in your computer, the virtual memory is too low, you can use Windows Optimizer to try, it really doesn't work, it is recommended that you redo the system, so that your computer will return to the same speed as before, I hope it will help you, of course, don't do the system in the last resort, downstairs!!

  15. Anonymous users2024-02-01

    You can take a look at the startup items to reduce some unnecessary startups. I delete the useless files and take a look. It should solve your problem.

  16. Anonymous users2024-01-31

    Reinstall the system My family uses this method, and it works very well.

  17. Anonymous users2024-01-30

    There are too many files on the computer, the unnecessary ones are deleted, and the system is updated.

  18. Anonymous users2024-01-29

    Maybe it's because there are too many things on the C drive, ......

  19. Anonymous users2024-01-28

    There is a problem with the computer, sit down again.

  20. Anonymous users2024-01-27

    You can right-click on the taskbar - show the desktop - if it doesn't work, you can simply check it first to see if there is too much dust in the host. If it's all right, reinstall the system.

  21. Anonymous users2024-01-26

    This is also the case with my computer.

Related questions
6 answers2024-08-07

The file shredding is completely deleted from your machine. >>>More

8 answers2024-08-07

Other systems can be turned on"My computer"In the top left corner, enter the name of the file you're looking for. >>>More

10 answers2024-08-07

How to create a LAN shared folder:

1. Write down the name of your computer, and see how to modify your computer name for details, you can check the references later. >>>More

3 answers2024-08-07

1. Let's say these three files or folders.

We don't need it anymore. We right-click and the menu pops up. >>>More

3 answers2024-08-07

Recently, a friend asked in a private message in the background how to transfer files between two computers. Therefore, in response to this problem, I will organize a tutorial on transferring files between two computers, and I will bring it to you now. >>>More