How to use 3D shutter glasses Konka

You can point the infrared signal receiving window on the glasses at the 3D TV, press the power button, and the waiting indicator flashes blue, indicating that the glasses have been opened, and you can ** 3D TV, you can enjoy the 3D effect. Pay attention to the effective reception range of the glasses. Press the power button in the power-on state to enter the standby state, the blue light will no longer flash, the glasses will stop working, you need to use it under the 3D film source, thank you for your consultation, I wish you a happy life, goodbye!

First of all, open a 3D format of the film(left and right format,Up and down can be,Red and blue are not),Then turn on the TV's 3D mode(Generally, someone on the remote control3D button can be pressed once),See if there is a ghost display on the screen,If you feel that there is a ghost, it means that the TV ** is no problem。 Finally, turn on the switch of the glasses, and you can see the 3D effect.

Shutter 3D glasses require batteries,You can find a small button-shaped switch on the glasses,Turn on the button switch to use,In addition, it should be noted that the shutter 3D glasses are used together,That is to say, it can only be used with the purchased shutter 3D TV,Other brands of shutter 3D TVs are not compatible so they cannot be mixed。

Another point is that the requirements for TVs are not only to match TVs of the same brand,At the same time, hard-screen polarized 3D TV shutter glasses are ineffective。

Only those who meet the above conditions can be used together, and the same is true for computers, and shutter glasses cannot be used on computers. Usually, the computer uses**software**The effect is similar to that of a hard-screen polarized 3D TV,That is to say, you can only use polarized 3D eyes to see on the computer,This kind of glasses is lighter and cheaper than the consumption,Buy a hard screen polarized 3D TV on the market will generally send two more polarized 3D glasses。

In fact, ordinary computer software can also see 3D effects, but you need red blue light or red and green light glasses to watch 3D effect movies on the computer.

Dear users:

Hello, sorry for the inconvenience caused by the product!

According to your description, please refer to the manual of the random 3D glasses to pair and use;

The steps to use shutter 3D glasses are as follows:

1) Align the infrared signal receiving window on the glasses at the 3D TV, press the power button, and the indicator light to work flashes blue, indicating that the glasses have been opened, and you can enjoy the 3D effect on the 3D TV. Pay attention to the effective reception range of the glasses.

2) Press the power button once in the power-on state to enter the standby state, the blue light will no longer flash, and the glasses will stop working.

The glasses are with batteries, and a small button switch can be found in the glasses, and you can turn it on, and the shutter glasses can only be used with the purchased shutter 3D TV, and cannot be mixed with other brands of shutter 3D TVs. At the same time, it is ineffective for hard-screen polarized 3D TV shutter glasses, even if it is of the same brand.

The analysis is as follows:

Steps for using Changhong shutter 3D glasses:

1. Turn on the shutter 3D glasses start switch.

2. Code. There are two kinds of Changhong shutter 3D glasses (single button, double button), and the author will talk about how to match the code for these two glasses.

There is only one button shutter type 3D glasses,Press and hold the power button in the shutdown state for 3-5 seconds,When the indicator flashes rapidly,Put the glasses to the bottom of the Changhong TV,As shown in the figure;

Changhong 3D glasses with two buttons, one button is the power button, and the other is the code key. After turning on the power button, press and hold the glasses to the bottom of the TV when the indicator flashes rapidly.

Note that when the 3D glasses are under the 3D TV, the indicator light will become on, and the TV will prompt that the code matching is successful.

Between these bai formats it is not possible to make a du

Software can be transformed.

Zhi, their 3D technology.

DAO is fundamentally different, active shutter style is.

Shutter 3D glasses should be charged before use, and the transfer switch on the glasses should be turned to "3D" mode when in use.

The TV has a 3D synchronizer,Turn on the 3D function on the TV after plugging it in,Turn on the power of the eyes,You should be able to receive the signal,Generally, the small light on the glasses will flash when there is a signal。 That's where you can!

Dear Konka users:

Hello, thank you for your support to Konka! KonkakktvTV,Use bluetooth3D glasses,In the middle of the glasses frame,There is a switch button,Before use,Need to match the code,The way of the code is:Bluetooth3D glasses are facing the TV50cmor so,There is a switch button on the glasses,Press and hold for 3 seconds,The red light on the glasses、The blue light flashes alternately a few times,The matching code of the TV and glasses banquet is successful。

Press the switch button on the glasses once, and the blue light flashes to indicate that the 3D glasses have been turned on; Just open the 3D source**. Press the switch button on the glasses again, and the red light flashes to indicate that the 3D glasses are turned off.

Note: If the glasses cannot receive the 3D source signal for a period of time, the glasses will automatically enter the standby state, and there will be no 3D effect when **. If you want to ** 3D sensitive travel fruit, you need to turn off the 3D glasses and turn them back on.

It is usually in the frame close to the frame.