Casio watches are not accurate in seconds!! 10

The following is an introduction to the five common reasons for the inaccuracy of the watch time

1: Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2: Insufficient power: If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3: The watch has been hit or impacted: the watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4: Need maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained, and needs to be sent to the designated maintenance point for maintenance services.

5: In addition to the above common situations, some ambient temperatures affect the watch by magnetism: if the balance spring of the watch is magnetized, the watch will not be accurate.

Maybe the machine is designed like this, and if it can become normal, it means that it is not a quality problem. Read the manual carefully, if it can't be solved, see if you can contact the manufacturer.

If you think he can get back to normal and continue to work, then use it first, after all, the clock can't be bad for 1 second. As far as I know, the world's most accurate watch will also have an error of a few seconds or even a dozen seconds, let alone Casio said seconds.

Errors are also instantaneous, and they cannot be eliminated. In objects such as clocks and watches, the error can only be minimized, and it is impossible to eliminate the error, I think it is better to use it first, if his time error is 20 minutes, you need to pay attention.

It is normal for this thing to be inaccurate, and it will lead to inaccuracies due to temperature differences or pressure differences. The manual is marked with a standard error, if it is within that range, it should be no problem, if it exceeds the error, find a professional appraisal department to return it!

Your watch belongs to the electronic watch category, theoretically there should be no such problem, and it has been verified before leaving the factory.

But other reasons are not ruled out, it is recommended to go to Casio after-sales service to test it, if there is really a problem, then it is necessary to discuss the explanation.

I'm also using Casio's, and I've been using it for two years so far, it's no problem By the way, it's ten seconds slower in the front and ten seconds faster in the back, isn't that just offsetting?

Usually everyone looks at the hour hand and minute hand...

If you look at the seconds, there is a stopwatch function on it

Summary. Pro, the calendar and day of the week are 24 hours, first of all, you first adjust the time clockwise to about twelve o'clock (the time of each brand calendar beating is different), if you see the calendar beating, it means that it is zero morning, if it does not jump at noon, the normal calendar is zero morning beating, your watch should be beating at noon, indicating that it is slow or fast for 12 hours, as long as you dial another 12 hours, it is best to adjust clockwise, note: the calendar can not be adjusted counterclockwise.

Casio watch date daytime jump! What to do.

Pro, the calendar and day of the week are 24 hours, first of all, you first adjust the time clockwise to about twelve o'clock (the time of each brand calendar beating is different), if you see the calendar beating, it means that it is zero morning, if it does not jump at noon, the normal calendar is zero morning beating, your watch should be beating at noon, indicating that it is slow or fast for 12 hours, as long as you dial another 12 hours, it is best to adjust clockwise, note: the calendar can not be adjusted counterclockwise.

Jump as soon as you reach twelve.

This is caused by the fact that the angle of the watch hand does not match the calendar jumping time when the watch hand is installed, which does not affect the punctuality of the time. If you want the calendar to jump at 12 o'clock in the morning, the solution is to open the watch cover, slowly twist the handle, and force the second hand, minute hand, and hour hand to 12 when the calendar beats, and then close the watch cover and adjust it to the time at that time.

Or, the watch has a daytime day jump, which is a debugging method error. Pull the handle to the dial and turn the handle, turning the hour and minute hands clockwise. At that time, the minute hand was around 12 p.m., and the change of day ended.

If the date does not match the current date, you can use a quick method to change the day: reverse the hour and minute hands for 2-3 hours, and then dial it to 12 o'clock to change the day, and repeat until the date matches the current date; At the same time, the hour and minute hands should also correspond to the time of day, but it is important to pay attention to whether it is in the morning or in the afternoon. Otherwise, there will be a change of day at 12 noon.

The old bird is coming. The first question, is that what it is?

That's definitely it, don't say that Casio is 10,000 yuan Omega is also like this, unless it is a very expensive perpetual calendar to distinguish the size of the wheel such as a wide month. Your date is 31 days, and April is only 30 days, so your May 1 is actually shown as April 31, and you will need to adjust the time for months with less than 31 days in the future, in addition to 30 days, there are 28 and 29 days in February.

And then there's the date after adjusting it! The date doesn't move, why is that? This is the second question.

For example, you are actually 11 o'clock in the evening, and the rubber socks on the watch have been checked for 12 hours, and the watch shows 11 o'clock in the morning, and naturally it does not jump at night, and it jumps at 12 o'clock at noon the next day.

Is it normal for the second hand to be inaccurate? This is the third question.

Yes, strictly speaking, the vast majority of watches are not accurate, and if you look closely, it will not match the scale, which is normal, as long as it is not particularly exaggerated, you don't need to mind. If you adjust it, you have to change the dial, which is very troublesome and costly, and it is not necessary.

Message me with questions, I hope it helps you.