My combine harvester is always running a high 30

The heat dissipation is too poor, the first step is to wash the filter outside the water tank, and the second step is to check the belt, especially the 6 belts, to see if the belt is overworn. This basic is done, you have to hit ** to three packs, otherwise everyone wastes time, of course, if the engine power you use is too small, it is recommended that you change the harvester.

There are too many heat conditions and a field visit is required.

I don't know how to solve it for you.

Is the fan belt loose? What model.

Summary. Hello dear, I'm glad to answer for you, what's going on with the high temperature of the harvester?

Answer: Harvester high temperature is one thing, 1Grass clippings, dust and other debris are adsorbed on the front windshield of the locomotive and the radiator of the water tank, resulting in the inability to ventilate and cool down, affecting the heat dissipation effect.

2.The thermostat malfunctioned and could not be opened, preventing the cooling water from circulating.

3.Poor belt tension caused the fan to run at insufficient speed, resulting in a significant reduction in cooling capacity.

4.Insufficient cooling water due to leakage or seepage of pipes, or overflow pipes, or faulty tank covers.

What's going on with the high temperature of the harvester.

Your question has been received, it will take a little time to type, please wait a while, please don't end the consultation, you can also provide more effective information, so that I can answer for you more coarsely and dry.

Hello dear, I'm glad to answer for you, what's going on with the high temperature of the harvester? Answer: Harvester high temperature is a big deal, brother cover, 1Grass clippings, dust and other debris are adsorbed on the front windshield of the locomotive and the radiator of the water tank, resulting in the inability to ventilate and cool down, affecting the heat dissipation effect.

2.The thermostat malfunctioned and could not be opened, preventing the cooling water from circulating. 3.

The belt tension is not suitable for control, which makes the fan speed insufficient, resulting in a significant reduction in cooling capacity. 4.Insufficient cooling water due to leakage or seepage of pipes, or overflow pipes, or faulty tank covers.

Thank you for your patience. The above is my full reply, do you have any other questions? I can continue to answer your questions, I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you at this time.

Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up, and once again wish you all the best! Peace and joy.

Boil too much water. Check whether the ventilation duct between the radiator chips of the cold mold is covered with dust, grass clippings, etc., and clean it. It is strictly forbidden to overload the operation, and the load in the high temperature season is controlled at about 90% to prevent the temperature from being too high.

The main reasons for the high temperature of harvesters are as follows:

1.The engine is overheating. The harvester engine will generate a lot of heat when it runs for a long time, and if the fan or radiator can't dissipate the heat in time, the engine will overheat.

2.Flat tires. When the mechanical tire pressure is improper or the tire is over-damaged before grinding, it will cause the tire to burst and produce high temperatures.

3.The oil circuit is blocked. If the harvester's oil circuit is blocked, it will lead to poor oil flow and the oil temperature of the engine will be too high, which will lead to high temperatures.

4.Harvesting work environment. The harvester operates in a hot, dry weather environment, which increases the temperature of the machine itself.

If the harvester is in a high temperature state for a long time, it will not only affect the normal operation of the machine, but also may cause damage to the machine, thereby affecting the operation efficiency and output. Therefore, when using the harvester, it is necessary to regularly inspect all parts of the machine to ensure the normal operation of the machine, pay attention to the working environment of the machine, and take timely measures to prevent high temperatures.

It should be that the thermostat is broken.

Hello, it may be that there is not enough coolant.

There are many reasons for this, such as insufficient horsepower, poor heat dissipation performance of the water tank, blocked waterways, poor water circulation, and possibly, ignition timing, too early or too late can lead to high water temperatures.

Hello question. Answer: If there is a high temperature in the engine, first of all, to see if the coolant is enough, to add coolant in time, and then to see if the fan can work normally, and to see how the water pump works, these will cause the engine to be high.

Ask about the new water tank that was replaced last year.

Question: If you go to work in the fields at 80, won't the temperature be higher? The empty run is 80, and it won't be higher if there is a negative combination.

Question: Run on the road, increase the water temperature of the throttle, and see this rise.