How to knit a baby bucket hat, how to knit a bucket hat

Prepare the rod needle, yarn and rod needle. Let's take 30 stitches and do demonstration. Assign 3 needles to knit the next needle and start knitting the edge of the hat.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

We knit the edge of the hat, knit the length of one inch, and then change the knitting to a needle up and down the needle. Weave an inch and a half length.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Then change the stitching again and knit the needle to weave the cap to the length you need.

Please click Enter a description.

Then start to reduce the needle, the method of reducing the needle: knit a needle under the needle, and then two needles and one needle, so that one needle is lost. And then weave the loop like this.

Please click Enter a description.

After weaving a circle of needle reduction, then knit a circle of needles, and then a second circle of needle reduction, and the same as the first needle, a needle, then two needles and a needle, after weaving this circle, and then knit a circle of needles. Then start reducing the needle a third time, just like the first two times. In this way, the needle is reduced three times.

Please click Enter a description.

Please click Enter a description.

There are still about 10 needles to be retracted when knitting to the rod needle. Leave the thread 10 cm long and break it, then thread the thread into the coil and tighten it on the reverse side.

Please click Enter a description.

Please click Enter a description.

Then turn it over and tidy it up so that the baby hat is knitted. Finally, sew a few small decorative flowers to make it look even better.

Please click Enter a description.

Please click Enter a description.

1.Prepare the rod needle and wool, first tie the yarn into a slipknot, thread the rod needle into the slipknot, and then wrap the thread with your fingers, and put the winding coil on the rod needle, now there are two coils on the rod needle.

2.Repeat the needle in this way, for a total of 32 needles.

3.After the needle is completed, start to knit a needle on the needle, a needle on the needle, a needle down, as the saying goes, up and down the needle.

4.Repeat to the length you need to knit to the brim.

5.Then start knitting the hat body, after knitting a circle of positive needles, and then knit a circle of reverse needles, and repeat the knitting to the length required for the hat body.

6.After the completion of the knitting of the hat body, you need to knit the top of the hat, the knitting of the top of the hat takes the method of collecting the needle, after weaving two positive needles, two needles and one needle to collect the needle, so repeat the weaving, only to the rod needle and there are 10 needles.

7.After the completion of the knitting of the hat body, you need to knit the top of the hat, the knitting of the top of the hat takes the method of collecting the needle, after weaving two positive needles, two needles and one needle to collect the needle, so repeat the weaving, only to the rod needle and there are 10 needles.

8.Then turn the hat over and sew a small ornament of your choice on the hat, so that the baby hat is knitted.

The milky white squirrel down I used in this bucket hat has a dosage of about 150 grams, a six-gauge rod needle, and three buckles for the sleepy bend. The specific steps are as follows:

1. Flat needle starting method, 120 needles, knitting four circles of flat needles to form a curled brim, and then weaving a false single thread, that is, a circle of positive needles, a circle of positive and one negative.

2. After weaving six circles without adding or subtracting, start to reduce the needle, divide the total number of needles into six parts, the first two needles of each part and one needle, and each circle of fierce ruler slag are combined, and all the needles are used when the needle. Continued until there were fifteen stitches per portion, with a total of ninety stitches, and the brim began to be knitted.

3. The body of the hat, each group of patterns, six needles for twist needles, four needles for washboard needles, one needle for four needles for washboard needles.

4. After weaving two horizontal bars, that is, four circles, start twisting the twist, and then start twisting the second time every four horizontal bars, that is, eight circles, the hat body twists three times in total, and then weaves a horizontal bar, and the hat body ends.

5. The crown of the hat is a false single thread, which is to echo the brim.

6. The number of needles in each copy is required to be double, so we should receive fourteen needles for each copy, and we will collect six needles evenly and dispersed.

7. The top of the hat is divided into six parts, and the number of needles is divided into six parts, and the method of collecting the needles is to pick up the first needle, the second knitting needle, and then pick the first needle to cover the second needle, and always receive the total number of needles to twelve needles, pass through the thread and tie it tightly. The top of the hat is flat and beautiful, and the sisters may wish to give it a try.

8. The total height of the cap body and the top of the hat is 19 cm.

The wool knitting method of the bucket hat is as follows:Tools Raw materials: wool thread, ring needle, sweater needle.

Method steps.

In the first step, prepare a ring needle and a pair of 7-gauge rod needles.

In the second step, the finger is wound with 9 stitches.

In the third step, the first stitch of each row is not woven, and the front is knitted.

The fourth step is to weave 16 lines.

The fifth step, the 9th needle is picked in this one eye.

The sixth step is to weave 8 pieces, and the first circle is pure.

The seventh step is to merge to the last stitch and the last stitch of the first piece, which is always 9 stitches.

The eighth step is to use the upper needle to knit the 9 needles, and then use the upper needle to pick out the 9 needles in turn.

In the ninth step, the 9th stitch picked at the end is directly merged with the next piece.

The tenth answer is to step forward, which is what it looks like when you drop 4 stitches.

The eleventh step, the first piece of the 2nd circle is completed.

The twelfth step, which is to complete the 8 pieces, the second round is completed.

The thirteenth step, continue to weave, and such a beautiful hat is knitted.

Different types of hats are also great for modifying the face shape. For example, you can choose an angular hat for a round face, but it is not suitable to wear a round hat; For square faces, don't wear angular hats, but round hats to make the face more rounded. The main function of wearing a hat in winter is to keep warm.

Therefore, winter hats should be chosen with strong warmth.

The tutorial on how to weave a bucket hat is as follows:

1. Start the needle. Prepare the yarn and crochet needle to start the needle, wrap the coil around the left finger twice, and hook out 3 braid needles to complete the needle.

2. a cap top.

1) Then the part of the needle continues to hook 14 long needles, and the 3 braid needles of the needle are a total of 15 long braid needles, and the head circumference is connected to hook a pull needle to end the first circle.

2) In the second circle, hook 3 braid needles, hook 2 long needles in each braid, connect head to tail, and end with a pin extraction.

3) Start with 3 braid needles in the third auspicious branch circle, hook a long needle in the first braid, and then hook 2 long needles in the second braid to complete the weaving of the top part of the hat.

3. A cap body part.

1) In the fourth circle of the cap body, the same 3 braid needles are started, a long needle is hooked out of the same hole, and then a braid needle is hooked, and then 2 long needles are hooked in a braid, and the operation is repeated.

2) The fifth and sixth circles start 3 braid needles, hook 2 long needles in the same hole and add 3 braid needles to 3 long needles, and then hook a braid needle, and then separate a braid in the slag enough for 3 long needles, repeat the operation.

3) In the seventh circle, the same 3 braid needles start, hook out 4 long needles in an empty space in the beam cover, then hook a braid needle, continue to hook 4 long needles in the next braid, repeat the operation, until the 14th circle, or the required length, hook a circle of short needles, and the cap body part ends.

4. a brim part.

1) In the 16th circle, there is enough for a circle of fishnet needles, pick up 5 braid needles, hook a short needle in the braid connected by two aquatic plants, and then hook 5 braid needles, and repeat the operation.

2) In the 17th circle, hook 8 long needles and a short needle in the fishing net needle, then hook a short needle and 8 long needles in the front fishing net, repeat the operation, break the thread and hide the thread, and the brim is knitted.

The knitting method of the baby hat is as follows:

1. Calculate the number of stitches required.

2. Thread the eye of the needle on 3 rod needles on an average and place them on the table in a triangle. When carefully placed into a triangle, the eye of the rod needle will be reversed.

3. Pick up the bottom rod needle, use the 4th rod needle to knit one needle high and one needle low from the bottom to the top with a ring knit, and weave it into a cylindrical shape.

4. Cap top shrinkage needle. Cut the yarn, thread the thread with a needle, thread the eye of the needle in a clockwise direction, and tighten and tie it tightly. You can add accessories such as hairballs to the top of the hat.

5. At the beginning of the knitting, the first row should be sewn with a thread. There will be a concave in the knitting place, and the thicker the yarn, the more obvious it is, because when weaving the second row, the thread needs to be stitched together from the first row to the second row. The stitching is complete.

Benefits of Knitting:

1. Effectively relieve stress and prevent depression.

Craft-making activities such as knitting can be a sky-high antidepressant, it can lower heart rate and blood pressure, reduce stress, prevent brain aging, and even be effective in post-traumatic stress disorder.

2. Prevent various chronic diseases.

Weaving can prevent Alzheimer's disease, and also has a spine relieving effect on the anxiety and irritability symptoms of women's "premenstrual tension" and "menopausal syndrome", can prevent muscle atrophy and low muscle strength, and can also prevent and treat "writing syndrome" such as hand numbness and pen weakness caused by long-term writing and painting.

Knit a small hat for your baby to give your little one gentle protection. A small hat for babies that is simple and soft. Let's learn how to knit a baby hat.

<> prepare the yarn and knitting needles. We start weaving from the top of the hat. Start with 9 stitches.

The first row is shot with one shot and one shot. The second row is all weaved.

One more shot plus one shot in the 3rd row. The 4th row is all knitted. This adds 68 stitches.

68 needles on 4 needles, each with 17 needles.

Then weave to the desired length without adding or subtracting.

<> the length of the weaving is enough, start weaving, first knit the upper and lower needles, knit 2 cm, and then knit the next needle 4 cm. Finally, all the knitting needles are collected. Finally, the thread is broken and the thread is hidden. Finish.

<> finished product drawing. <>