How to weave an octagonal hat? How to weave an octagonal hat

The octagonal hat, also known as the Red Army hat, is a symbol of the Red Army, at the end of the 20s of the last century, with the Jinggangshan base.

The establishment and "red" movement of the Chinese Workers' and Peasants' Red Army.

The team has expanded rapidly, and the need for uniform clothing in terms of combat and management has become increasingly apparent.

March 1929 Changting.

The first battle of Changling Village.

Later, in order to boost morale, the front committee of the Red Fourth Army decided to rush to produce 4,000 sets of regular Red Army uniforms.

Thus, for the first time, the Red Army had a uniform uniform within the confines of an army.

It is also one of the most conspicuous parts of the Red Army's military uniform. The outer mouth of the crown is octagonal, the lower end is connected with a section of brim, and there is a half-moon shaped visor in the middle of the front, and the weaving method is as follows:

1. Start with 8 stitches.

2. Knit a row of needles first, divide 8 needles into 3 needles, put a needle under 1 needle, put a needle and put a needle under the needle, 8 times, become 16 needles.

3. The next row is all flat needles (lower needles).

4. Put a needle on a flat needle, put a needle on a flat needle, put a needle on a flat needle, and put a full flat needle; 3. Put a needle on a flat needle... and a full flat needle; Repeat this until you need a big enough cap (the octagonal cap is bigger and looks better), this one is 30 stitches * 8 = 240 stitches per portion.

5. Then begin to collect the needle, from the last place according to a needle to receive, each line to collect 8 needles, the line is closed so that the horn can grow, 6, the completion of the diagram is as follows.

1. Start the needle, start 8 needles, as shown in the figure below.

2. Knit a row of needles first, divide 8 needles into 3 needles, put a needle and put a needle under the needle, a total of 8 times, become 16 needles and the next line of all flat needles (needles), 8 needles are the same weaving, as shown in the figure below.

3. The second circle, do not add or subtract a circle, as shown in the figure below.

4. In the third circle, weave two needles and add one needle; The fourth lap is neither added nor subtracted; In the fifth circle, knit 3 needles and add 1 needle, as shown in the following retreat.

5. In the sixth circle, knit 4 needles and add one needle. In the 7th circle, knit 5 needles and 1 needle. Repeat this to the desired length, as shown in the figure below.

6. After weaving to the required length, weave 8 10 needles to collect one needle, and complete this circle. Start knitting the hem of your hat. Cap hem weaving: knit one needle after another, knit to the length you need. Then close the needle, break the thread, and hide the thread, as shown in the figure below.

7. In this way, the octagonal hat is woven, which is very simple, as shown in the figure below.

The tutorial on how to weave an octagonal hat is as follows:

1. Knitting at the top of the hat. 8 needles, with these 8 needles as the main line, divided into 8 groups, one group plus 1 needle, one circle plus 8 needles, continuous knitting 11 rows, until 12 needles as a group. There are a total of 96 stitches, all of which are flat stitches.

2. Start weaving patterns. The pattern is a group of 12 needles, a circle of 8 sets of patterns, a total of 96 needles. The first row first knits 7 needles, picks 5 needles without weaving, and the thread is very loose from the front ridge, and then still follows the 7 needles on the needle, picks 5 needles without weaving, and the thread is very loose from the front, so repeat the weaving of 8 patterns.

3. All the needles in the second row.

4. The first row is repeated with the first line of weaving.

5. All the needles in the first row.

6, the 8th line of weaving 9 needles, the 10th needle, from the 4 threads pulled up under the Sakura town Jing weaving a needle, each to pick out the 5 needles in the middle of the 1 needle need to be pulled out of the 4 threads pulled up to weave, repeat until the weaving of 8 groups of patterns, then 8 groups of patterns, the actual number of needles is 12 needles, the middle needle under the needle is pulled up from under the thread to weave.

7. The 9th line is 12 rows, and 4 rows of flat needles are knitted.

8. The 13th row begins to weave a row of patterns, and the weaving method is the same. It's just that the pattern should be staggered with the first row, and the original place where the needle was knitted was picked up to take the needle, and the needle was knitted where the needle was originally picked, and so on.

9. a hat brim. The 1st row is averaged, 96 needles receive 80 needles, 4 rows of upper needles, 4 rows of lower needles, repeat 4 times, and the last 1 row of flat needles is added to 96 needles, and the needle is closed!

Detailed steps for hand-knitting an octagonal hat:

2. Knit a line of needles first, divide 8 needles into 3 needles, put a needle and put a needle under the space, a total of 8 times, become 16 needles and the next line of all flat needles (needles), 8 needles are the same weaving.

3. The first two circles of the god of fighting skin, do not add or subtract a circle.

4. In the third circle, weave two needles and add one needle; The fourth lap is neither added nor subtracted; In the fifth circle, knit 3 needles and add 1 needle (each needle must be added next to one of the 8 needles). Blind.

5. In the sixth circle, knit 4 needles and add one needle. In the 7th circle, knit 5 needles and 1 needle. Repeat this process to the desired length.

6. After weaving to the required length, weave 8 10 needles to collect one needle, and complete this circle. Start knitting the hem of your hat. Cap hem weaving: knit one needle after another, knit to the length you need. Then close the needle, break the thread, and hide the thread.

The octagonal hat and the red five stars are the symbol of the Red Army and one of the most conspicuous parts of the Red Army's uniform. There are various theories about the origin of the octagonal hat of the Red Army, of which at least four are widely circulated. It was designed by Zhao Pinsan.

After the establishment of the Chinese Soviet Republic in November 1931, the Red Army School was established in Ruijin, the Red Capital. At the beginning of 1932, he was transferred to the Red School as the principal.

After he arrived, he saw that the cadets drawn from various units were dressed in a variety of clothes and the queue was very untidy when they went out for exercises or gatherings, so he found Zhao Pinsan, director of the school club, and said: "The students' dresses are too messy, and the country has been established, and you can have the conditions to make a unified school uniform. ”

Prepare thick needles and thick wires. Start with 8 stitches. Dispense on 3 needles.

In the first circle, add a needle, and then weave a needle. All 8 stitches are knitted in the same way. The second circle, do not add or subtract a circle.

In the third circle, knit two needles and add one needle. The fourth lap is neither added nor subtracted; In the fifth circle, knit 3 needles and add 1 needle.

Each time you add a needle, you must add one of the 8 needles next to each other) the sixth circle, knit 4 needles, add one needle.

In the 7th circle, knit 5 needles and 1 needle. Repeat this operation to the length of the required Birang Tong. After weaving to the required length, knit 8-10 stitches to close one stitch, and complete the circle.

Then close the needle, break the thread, and hide the thread. Thread the top of the hat and tighten it, tie it, and break the thread. Slide and dig so that the octagonal hat is woven.

The weaving of the octagonal hat is as follows:Preparation materials: wool, sweater needles.

Knitting steps: 1. The needle is more than literal, a multiple of 16, I started 144 needles, single-thread gardening.

2. Single-turn thread weaving 26-28 rows.

3. Synthesize a double layer, leaving 10 stitches to be placed on the brim.

4. After synthesizing a double layer, weave 2 rows of single threads, and divide them into eight groups with 4 bamboo needles, and weave 36 needles.

5. Add 1 needle at the back of each circle and each group.

6. Add 14-16 needles to each group, that is, 64-68 needles for each bamboo needle.

7. After adding the needle, weave 2 rows without adding or subtracting, and start to reduce the needle.

8. Start to reduce the needle, and lose 8 needles in each row.

9. When the needle is reduced to 8 stitches left, you can thread it with a needle.

10. What it looks like after wearing eight stitches.

11. Finally, put the brim of the hat in and sew it up.

Tools: rod needle, rod needle thread.

Steps: 1. Prepare to grind the thick needle and thick wire. Start with 8 stitches.

2. Distribute on 3 needles. For the first circle, add one stitch and knit another. All 8 stitches are knitted in the same way.

3. The second circle, do not add or subtract a circle.

4. In the third circle, weave two needles and add one needle; The fourth lap is neither added nor subtracted; In the fifth circle, weave 3 needles, and add a needle. (Each addition must be next to one of the 8 needles.)

5. In the sixth circle, knit 4 needles and add one needle. In the 7th circle, knit 5 needles and 1 needle. Repeat this process to the desired length.

6. After weaving to the required length, weave 8 10 needles to collect one needle, and complete this circle. Start knitting the hem of your hat. Cap knitting: knit a cover of key needles on the stitch, knit to yourself and then close the needle, break the thread, and hide the thread.

7. Tighten the thread at the top of the hat, tie it up, and break the thread. So that the octagonal hat is woven.