What to do if the ecliptic appears on the screen of iPhone5

1.If the cable is broken, the cable connecting the screen and the motherboard is burned or loosened, so it's good to change the cable.

2.The screen is broken, and the LCD screen is broken, this kind of no way, the most troublesome, to replace the entire screen assembly, the cost is very high.

3.If the motherboard is broken, it is also to replace the entire motherboard, but this probability is relatively small, but it is not ruled out, the way is to replace the motherboard, and the motherboard is generally cheaper than the screen.

Users can get Apple after-sales service to repair, do not find a non-Apple repairer.

Reasons for the black screen of your iPhone: It may be caused by an internal conflict in the software you have installed. In serious cases, the screen will restart and so on.

It is also possible that the mobile phone has been used for a long time and the heat is not dissipated in time. As long as you press and hold the power button and the exit button (home) at the same time for about 10 years, it will force the shutdown and then restart it. However, it is generally not recommended to force a shutdown.

There is an impact on mobile phones.

The solution to the black screen of the iPhone:

1.If you enter DFU mode, you will exit according to the exit method of DFU mode.

2.If the screen is normally black, try connecting the phone to the computer iTunes or press and hold the power button until it can turn on.

3.If you accidentally press the recovery mode and cause a black screen, press and hold the home button and the power button together, press and hold together for about 15 seconds and let go, and then press the power button to recover.

4.The black screen is basically a software problem, power button + home button and press and hold for 10 seconds at the same time to see.

5.None of the above methods work, just use iTunes to restore the system.

It's normal for the screen to be yellowed.

The screen of the Apple mobile phone is divided into warm light and cold light, and the situation mentioned above is a warm screen.

The reason is that Apple's screens are all from different foundry factories, LG, Samsung, and Sharp all have foundries. Even different production lines of the same foundry will have different shades of screens. From the day it leaves the factory, the tone of the screen has been decided, and it cannot be adjusted through the system of the phone itself.

Distinction between cold and warm screens and reasons:

Cold screen, white temperature 9300K, white.

Warm screen, white temperature 6500K, yellowish.

Theoretically, warm screens are better for Asians because we have brown eyes. The cold screen is suitable for blue-eyed foreigners.

The actual situation is that Asians will feel a little more colorful when they look at the cold screen front liquid, although in fact, this color reproduction is not real.

In fact, Chinese tend to warm the screen because the colors displayed are more realistic for Asians.

Another closed hall is one way of saying that.

In areas with low latitudes, the preference of the human eye in color temperature is on the high side.

For example, people near the equator see an average color temperature of 11,000 K (8,000 K (dusk) and 17,000 K (noon)), so they prefer a higher color temperature (which looks more realistic) than silver, and conversely, people in higher latitudes (about 6,000 K average color temperature) prefer lower color temperatures (5,600 K or 6,500 K).

The yellowish screen of the iPhone 5S indicates that the mobile phone screen is warm and warm, which is normal.

The iPhone 5S has two screens, one is a warm color temperature screen, and the other is a cold color temperature screen, the warm color temperature is pale yellow, and the cold color temperature is light blue.

Color temperature (colo(u)r.)

temperature) is a scale that represents the light color of a light source, and the unit is k (Kelvin). Color temperature has important applications in photography, video, publishing and other fields.

The color temperature of a light source is determined by comparing its color with a theoretical hot blackbody radiator. The temperature of the Kelvin silver cavity when the hot blackbody radiator matches the color of the light source is the color temperature of the light source, which is directly related to Planck's blackbody radiation law.

It could be a problem with the phone itself. The solution was given in a foreign forum**, and they said that the reason for the yellow screen problem is very simple, because the adhesive used in the digitizer during the production process makes the device screen yellow. During the drying process, the adhesive will cause the screen to appear yellow.

Solution: If it is a problem with the screen of the mobile phone itself, it is recommended to find a mobile phone seller and consider repairing.

It will be fine in a few days, it is possible that the paint is not dry, which will affect the screen and lead to the yin and yang screen. However, if your iphone5s still has a yellow screen problem after a period of time, you can go to the store to find them to change, they will definitely give you a new phone, change until you are satisfied.

There is an eye protection in the settings, and the higher the color temperature, the more yellow the screen will be.

Some fruit fans asked what to do if the screen of iPhone5S is yellow? Green tea has brought the solution to the yellowing of the iphone5s screen, after reading the following, router settings, you will be able to know which is the culprit that causes the yellowing of the iphone5s screen Let's find out together

The first hand to get the iphone5s users found that there are some small problems on the device, such as the screen will be yellow when used, how to set up a line reason, foreign forums ** gave a solution, they said that the reason for the yellow screen problem is very simple - the adhesive used in the production process for the digital converter is the "culprit" of the yellowing of the device screen. During the drying process, the adhesive will cause the screen to appear yellow.

It is normal for the iPhone 5 screen to turn yellow, and it may be because the night mode is turned on.

Locate "Settings" on your iPhone's desktop.

2.Click to go to "Settings" and find "Display & Brightness".

3.Click on "Display & Brightness" and select "Night Shift".

4.Go to "Night Shift" and turn off the "Set Time" switch to turn off Night Mode.

It's normal if it's a little warmer.,Warm screen.,There's also a cold screen.。 These are not quality issues, if one place is warm and others are normal, then it is not right.

Normal. The screen warmer is not a quality problem.

The reason for the yellow screen problem is simple – the adhesive used in the digital converter during the production process is the "culprit" behind the yellowing of the device's screen.

During the drying process, the adhesive will cause the screen to appear yellow. In addition, it means that the yellow screen will disappear after a few days (about a week).

However, if the iPhone 5S still has a yellow screen problem or other problems after a period of time, then you can consider replacing it.

It may be that the color is warm, and there is a lower white point value in Settings - General - Auxiliary. When I opened it, I found that the screen had changed from a warm color to a cool color. The screen is not yellowing.

It helps you, thank you, and learn from Comrade Lei Feng. Happy New Year.

Apples are in such a hurry to ship that the air-drying process is not yet complete. After a day or two of use, especially if the screen is left on, the glue will quickly dry and the "yellow dots" will disappear quickly.

This phenomenon occurs because the adhesive has not completely dried. Once the glue is dry, these problems will disappear and it will take a few days. Apple uses an adhesive called Organofunctional Silane Z-6011 to bond the glass front cover.

Introduction: A screen, also known as a display screen, is an electrical appliance used to display images and colors. The screen size is calculated according to the diagonal of the screen, usually in inches, and the current mainstream size is"etc., which refers to the diagonal length of the screen.

Commonly used displays include standard screen (narrow screen) and wide screen, with a standard screen aspect ratio of 4:3 (and a small number of ratios of 5:4) and a widescreen aspect ratio of 16:

10 or 16:9. With a constant diagonal length, the closer the aspect ratio value is to 1, the larger the actual area.

The widescreen is more in line with the shape of the field of view of the human eye.

It's a little hard to see.,It should be the macula.,I have a friend's 4S has a similar situation.,It's heavier than your color.,Go directly to Apple customer service to replace it.,The reason is unknown.,But I think if the customer service changes it, it should be a quality problem.。

When Sony LY26i was first launched, some machines also had this macular spot, and Sony customer service replaced all of them.

This has not been the case, have you consulted with a local seller? Go ask about it, and if you can't get it, you can replace it.

You can go and flash the machine to try it.

Gently wipe with alcohol or a glass of water.

You might be bad too. Go for it.

The version made by each factory of LCD is different, and the Apple screen has a Sharp version, LG version, and Toshiba version, and if it does not affect normal use, it is no problem.

Open the system settings to see the background white of the settings, or the engineering mode test color! The yellow screen means that the screen you bought is inferior,Usually people don't change the machine for this reason.,You want to change it for individual reasons, some people will say that this is a warm screen, that is a cold screen, or something.。 In fact, there is no such statement, playing Chinese consumers, or some brain-dead people have made up their own brains But some screen yellowing problems can be adjusted kernel color or color temperature RGB adjustment software improvement (fierce blue + lower r = white, colder), these cases are rare, and its essence is still yellow screen and normal put together is obvious.

American sales love crazy, consumers find that their screens are much more yellow than others, you can disassemble more than 10 checks, until you are satisfied, the official statement is that the glue is not dry.