Solid wood pellets are a new type of environmentally friendly substrate, what are the advantages and

The advantage is that the environmental protection effect is particularly good, and it is also relatively resistant to high temperature, and the range of use is relatively wide, which can be used to make a dining table, but the disadvantage is that it is likely to be deformed, and there will be a peculiar smell after being corroded by moisture.

The advantage is that the decoration effect is very good, very strong, the decoration process is relatively simple, the installation method is relatively simple, the disadvantage is that it is very easy to corrode, there will be deformation, there may be wear and tear in the later stage, and the quality is not particularly good.

The advantage is that it is more environmentally friendly, will not cause harm to people's bodies, and the use value is relatively high, but the disadvantage is that it is more expensive, and the shape produced is relatively small, which can not play a waterproof effect.

In home decoration, board is one of the most common decoration materials, mainly used in cabinets, wardrobes, floors, wall panels, beds, sofas, tables and chairs, etc., and the more commonly used boards are blockboard, particle board, large core board, solid wood board, bamboo puzzle, veneer, MDF, finger joint board, melamine board, gypsum board, particle board and other categories, so what is solid wood particle board? Let's take a look with Qeeka Home experts. Sun Ku.

1. What is solid wood particle board?

Solid wood particle board is a new type of environmentally friendly substrate, mainly using wood, wood pole state and other raw materials, which are broken into particles and then added adhesive hot pressing, and will also be finished with melamine board, its cross-section is honeycomb, the surface is smooth and delicate, there is no scarring, insect eye, warping, cracking and other problems, strong decoration, wide range of use, and sound insulation, mildew, heat preservation, good processability.

Second, what are the classifications of home plates?

1. Classification by material.

Home board is mainly divided into two categories: solid wood board and wood-based board, mainly according to the material to distinguish, solid wood board as the name suggests is made of complete wood, the board is not only durable, but also natural texture, strong decoration, but the cost is high, the construction requirements are high, and there are more choices in high-end decoration.

2. Classification according to molding.

Different boards have different forming methods, which can be divided into solid boards, plywood, fiberboard, decorative panels, fireproof boards, particleboards, etc., among which plywood is made of three-layer, multi-layer and other millimeter thick veneer and thin board glue hot-pressed, so it is also known as plywood, decorative panel is made of plywood as the base material, and then the surface is made of single-sided decorative board, particleboard is pressed with wood scraps and glue, and MDF is made of wood fiber, other plant fibers and other raw materials, and is made of urea-formaldehyde resin.

Summary: The above is an introduction to what is a solid wood particle board, I hope to share the inner sail Mingrong can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia to consult.

Nowadays, there are many materials used in home decoration, and the types are different, in the production of furniture or cabinets, wood is often used, and many friends have recently said that they want to buy solid wood particle board to do this kind of decoration, so what is solid wood particle board, what are the characteristics of solid wood particle board? Let's take a closer look with me. Nowadays, there are many materials used in home decoration, and the types are different, in the production of furniture or cabinets, wood is often used, and many friends have recently said that they want to buy solid wood particle board to do this kind of decoration, so what is solid wood particle board, what are the characteristics of solid wood particle board?

Let's take a closer look with me.

What is solid wood particle board

When it comes to solid wood particle board, I believe that many friends only know this product, and do not know about its material, in fact, solid wood particle board is a new type of high-grade environmentally friendly substrate material in modern decoration, and it is also a kind of particleboard, this kind of material is made of wood and other lignocellulosic materials.

As a new, high-grade environmentally friendly substrate, solid wood particle board has been widely used by furniture manufacturers in Europe and the United States, and the domestic high-end panel furniture market has also begun to use this kind of board in a large area. Solid wood particle board is a board produced by the process of particleboard. The principle is the same as that of MDF.

What are the characteristics of solid wood particle board

1. Due to the particularity of the internal structure of this material, they have a good ability to hold nails. For furniture, they are very easy to install and sturdy. The density of this material is relatively high, and they are also made of wood fibers, so they also retain the natural wood material.

Moreover, the environmental performance of the glue is also very guaranteed.

2. The wardrobe of solid wood particle board, if you buy a brand finished product, it is slightly higher, but the workmanship is good, and the details can be seen.

3. The warping and deformation of solid wood particle board are small, the dimensional stability is good, the strength is high, the stiffness is good, and it is not easy to bend when hanging heavy clothes.

4. At the same time, the density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is retained, and the content of solid wood particle board is generally less than 5% in the use of adhesives, and the environmental protection is better.

5. The decorative performance of solid wood particle board is relatively strong.

Solid wood particle board is made of wood scrap as a material, and adopts certain physical and chemical essentials to participate in the processing of adhesives or other additives. Compared with natural firewood, it has a wide board surface, smooth appearance, no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc.

The above is a detailed introduction to what is solid wood particle board, the characteristics of solid wood particle board, solid wood particle board is a new type of environmentally friendly material, stability is also good, is a modern family favorite furniture material.

At present, there are many types of furniture panels on the market, and the owners are also dazzled in the selection of materials when decorating. Solid wood particle board has been widely used and will be used in many furniture. Solid wood particle board is one of the man-made boards, also known as particleboard, which is a new type of board, because of its good environmental performance, so it is well received by the majority of consumers.

Next, I will explain in detail what is solid wood particle board and what are the characteristics of solid wood particle board.

1. What is solid wood particle board?

1. What is solid wood particle board, solid wood particle board is made of log branches and branches after chipping and planing to form qualified shavings particles, and then drying, sieving (surface, core layer shavings), glue mixing, paving, continuous hot pressing, health preservation and sanding and other processes.

2. The inside of the solid wood particle board is composed of criss-cross shavings, which makes the board structure more stable, the bearing capacity is stronger, and it also has a stronger ability to resist deformation. The continuous hot pressing makes the shavings closer to each other and has a stronger nail grip force; And high-quality moisture-proof particle board will be produced by adding waterproof agent to bring better moisture-proof performance to the board.

Second, what are the characteristics of solid wood particle board.

1. The decorative performance is relatively strong.

Compared with natural wood, this kind of board has a wider board surface, a smoother appearance, and no disadvantages such as knots or insect eyes.

2. The warpage is not easy to deform.

3. Because its stability is very good, and the strength is also very high, even if it is hung with heavy clothes, it is not easy to bend, and the European furniture market is basically using this kind of solid wood particle board man-made board.

3. Strong nail grip.

Nail round nails, screws, etc. can be used.

4. Good processing performance.

Solid wood particle board has high density, good physical and mechanical properties, and is close to wood and better than wood in various wood-based panels. Its longitudinal bending strength is much larger than that of transverse and can be sawed, sanded, planed, drilled, nailed, filed and other processing, which is a good material for the furniture industry.

5. Wide range of uses.

Solid wood particle board is similar to Zen good plywood with good mechanical properties, suitable for decoration structural materials, solid wood particle board is an ideal material in furniture making and interior decoration.

6. Affordable.

Solid wood particle board is more competitive, in the case of increasing scarcity of forest resources and the reduction of large diameter wood, the use of cavity Xiang wood-based panels will only increase day by day, compared with solid wood, it is cheaper, practical, and easy to maintain. Its environmental protection is also relatively reassuring, and it is worth everyone's choice.

The above is the relevant knowledge shared for you about what is solid wood particle board and what are the characteristics of solid wood particle board, I hope it will help you. If you want to know more about solid wood particle board, please stay tuned.

I believe that everyone knows very well, the most popular building materials board on the market is solid wood particle board, but there are still many people who do not know much about solid wood particle board.

One. Five advantages of solid wood particle board:

1. Superior environmental performance.

2. Strong decoration ability.

3. Good processing performance.

4. The solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and it is not easy to bend when hanging heavy clothes.

5. The advantages and disadvantages of solid wood particle board are that the inside of solid wood particle board is granular with a cross and staggered structure. Therefore, the nail holding force is good, and the nail can be repeatedly hit many times, and the round nail and screw can be nailed. These machinability properties are significantly better than MDF 2, solid wood particle board has a higher density, the wood fiber particles in the board are larger, and more retains the essence of natural wood, and the content of solid wood particle board is generally lower in the use of adhesives.

Disadvantages of solid wood particle board:

Two. Six disadvantages of solid wood particle board.

1: MDF can be done with a certain amount of heterosexity and engraving.

2: Bright lacquer.

3: Light weight.

4: Engraving often sacrifices the load-bearing performance of the material.

5: MDF baking paint, it will change color after a long time and look old.

6: The ability to hold the nail is not enough, the weight bearing is not enough, and it is easy to deform after a long time.