Which is cost effective to choose oak, pine, birch, and rubber wood for the dining table?

Rubberwood is actually not so bad, it is relative to other woods, just like you said, there are also good ones, you get what you pay for. To choose a better wood, of course, birch or oak, birch is used in many furniture, oak is better. In addition, you have to look at the solid wood composition.

So it's up to you to choose.

Birch is elastic, easy to crack and warp when dry, and is not wear-resistant. Good processing performance, smooth cutting surface, good paint and gluing properties. It is often used for carved parts, but it is rarely used nowadays.

Characteristics of oak furniture: advantages:

It has a relatively distinct mountain wood grain, and the touch surface has a good texture.

The grade is high, suitable for making European-style furniture.

Disadvantages: 1) There are relatively few high-quality tree species, and if imported, ** is higher.

2) Due to the hard and heavy texture of oak, it is difficult to remove water.

It took a year and a half to start deforming.

3) The phenomenon of replacing oak with rubberwood in the market is common if the customer has professional knowledge.

No. Enough, it directly affects the interests of consumers.

Rubberwood is native to Brazil, Malaysia, Thailand, etc. Produced in China, Yunnan, Hainan and coastal areas, it is the raw material of latex. The color of rubberwood is light yellow-brown, the annual rings are obvious, the ring boundary is a dark band, and there are few pipe holes.

The wooden structure is coarse and uniform. The grain is oblique and the wood is hard.

Advantages: smooth cutting surface, easy to glue, good paint coating performance.

Disadvantages: Rubber wood has a peculiar smell, because of the sugar content, easy to change color, decay and insect eaten. It is not easy to dry, not wear-resistant, easy to crack, easy to bend and deform, easy to process wood, and easy to deform when processing plates.

Compare for yourself.

It is better to use rubber wood for the dining table, or fir wood.

Dear, I'm glad to answer for you: is it better to make rubberwood for the dining table, or fir is better to answer rubberwood. 1. Rubber wood itself is not a precious wood, it is used to make building materials and furniture after the old wood is cut down by rubber farmers in Southeast Asia.

The growth cycle is not long, and it can be grown in ten years, so it can be said that it is inexhaustible. 2. This kind of wood is not easy to crack in the dry areas of the north. 3. Rubberwood has good plasticity in the process of making furniture, so it can be suitable for making products with beautiful shapes and soft curves.

4. Rubber wood has good wood texture, beautiful texture and uniform texture. 5. Light color, easy to color, can accept all types of color dyeing and coatings, easy to match with the color tone of other woods, and has good paint coating performance. 6. Good hardness, natural high strength and wear-resistant, especially suitable for stairs, floors, tables, countertops, etc.

Disadvantages of rubberwood furniture 1, rubberwood is a tropical tree species, no matter from the hardness, material, texture, performance is one of the poor tree species 2, rubberwood has a peculiar smell, because of the sugar content, easy to discolor, decay and moth-eaten. It is not easy to dry, not wear-resistant, easy to crack, easy to bend and deform, wood is easy, and the board is easy to deform.

Summary. Dear, I am glad to answer for you: which is better for the slate dining table oak and pine.

Answer: The oak of the rock slab dining table is better, the wood of the oak furniture is harder, the stability is stronger, the texture is clearer, and the furniture made is durable, very simple and fashionable. The furniture made is very high-end, especially suitable for European furniture.

It also looks very high-grade at home, the wood grain is clear and the appearance is beautiful, and it is the delicate person in the furniture. 2. Oak has a rough structure, elegant color, wear resistance, and a large number of decoration, furniture, flooring and other materials are made of oak. The practicality is relatively wide, the water absorption is very strong, and it is also corrosion-resistant, and the quality of the solid wood furniture made with it is very good.

It is very strong, has a very long service life, and has preservation value.

Which is better for slate dining table oak pine.

Dear, I am glad to answer for you: rock slab dining table oak pine which is good to answer: rock slab dining table oak is better, the wood of oak furniture is harder, the stability is stronger, the texture is clearer, and the furniture made is durable, very simple and fashionable.

The furniture made is very high-end, especially suitable for European furniture. It also looks very high-grade at home, the wood grain is clear and the appearance is beautiful, and it is the delicate person in the furniture. 2. Oak has a rough structure, elegant color, wear resistance, and a large number of decoration, furniture, flooring and other materials are made of oak.

The practicality is relatively wide, the water absorption is very strong, and it is also corrosion-resistant, and the quality of the solid wood furniture made with it is very good. It is very strong, has a very long service life, and has preservation value.

What about pine. What about people.

Hold on. 1. The selection, design and manufacture of pine furniture belong to coniferous forest species, due to the high coverage rate of the forest, the trees are basically not pruned artificially, so that after the processing into wood, the branches leave traces of natural growth. When making furniture, it can fully show the authenticity, simplicity and natural beauty of the material.

2. Most of the pine furniture is simple and generous, the lines are full and smooth, the processing techniques with less carving are environmentally friendly and healthy, and it looks more natural and beautiful. 3. Good pine furniture after irregular maintenance, generally has a long service life, maybe it can also be used as an heirloom from generation to generation, the pine itself is solid wood, not easy to damage, the quality of pine furniture made of pine is even better, and pine furniture has the value of preservation, longer than the general wood life!

The main material of the oak dining table is oak wood, which is a beech plant, with elegant color and beautiful texture, excellent touch, and excellent toughness. The texture is firm, the practical life is long, the grade is high, suitable for the production of all kinds of European, Chinese classical furniture, thick and solid comparable to mahogany furniture, but cheaper than mahogany furniture. In addition, oak is also corrosion-resistant, and dining tables made from it are very waterproof and have a long service life.

Compared with the pine dining table, although it also has a natural color, in addition to the clear texture and practicality, and strong thermal conductivity, there are many shortcomings of pine furniture that are not suitable for kitchen furniture. For example, pine furniture is soft and easy to deform and crack, and the most important point is that pine furniture is easy to crack when the water content is high. In a restaurant, an environment that needs to be kept clean at all times, the moisture content is very high.

This characteristic of pine furniture determines that its practical life is not long.

Secondly, the pine dining table is extremely sensitive to sunlight and takes more effort to maintain than the oak dining table. In addition, pine dining tables are easy to change color, and the spray brushing of many lacquer surfaces is not environmentally friendly. The oak dining table, on the other hand, does not require too much effort in maintenance, and the oak dining table is dominated by its natural characteristics, with little spray paint, and is more convenient than pine furniture.

1.Oak is not easily deformed, whereas pine is prone to deformation. 2.The grain of oak is superior to that of pine. 3.The texture of oak is also superior to that of pine. So, oak is better than pine.

Birch is better for a desk.

One is that birch wood is definitely more expensive than rubberwood; In addition, rubber wood is poisonous, and it is generally used by some traitors to pass it off as oak.

Birch bark is also known as birch, birch bark is smooth, resinous, white or variegated, with transverse skin holes, usually broken horizontally and peeled into thin sheets, and the bark of the old trunk is thick and deep grooved, cracking into irregular fragments. The young tree has short, slender branches lifted upwards in a narrow tower-shaped canopy. The wood of birch is light brown to reddish-brown and is used as flooring, furniture, pulp, interior decoration materials, vehicle and ship equipment, plywood, etc.

Hardy, fast-growing, and more immune to pests and diseases, it is used for reforestation, soil erosion control, protective mulch, or tree conservation. Wet, fertile sandy or loam soils, sowing and grafting are required. Found in the cold regions of the Northern Hemisphere.

The disadvantage is that there is no grain and wood grain, unlike oak, catalpa, and ash.

If you consider the best factor, you can paste a layer of veneer on the countertop; If you have a larger budget, you can choose to change to a different kind of wood, and use the above ones to make it, and the effect is definitely much better.

Birch must be much better, one is that birch is definitely more expensive than rubber wood; In addition, rubberwood is poisonous.

1. Determine the dining area.

The size of your restaurant is the first thing that determines the size of your table. Therefore, before decorating, it is best to measure the area of the restaurant, and then choose a suitable size table according to the area of the restaurant. If the table occupies more than two-thirds of the entire restaurant, it will look very crowded.

2 According to the style of the room.

The style of your room determines what kind of dining table you should choose. There are different styles of dining tables, but if you want to mix and match, remember not to mix and match with too many conflicting colors. The rest of us should understand, that is, European style, Chinese style or pastoral style, just choose the corresponding style of dining table.

3 The shape of the dining table.

At present, the dining table on the market, some are square, some are round, and the main shapes are these two. The square dining table is relatively ordinary, so you can pay attention to the above two points when choosing. The round dining table should take into account the size and layout of the dining room.

The round dining table can invisibly shorten the distance between people, and the atmosphere of dining will be better.

4 Look at the brand.

Nowadays, most of the dining tables are made of wood. Don't be greedy for cheap when buying, and if you think it's cheap, you don't care about anything and buy it home. It is still necessary to look at the materials and materials used in the dining table.

Some dining tables are made of good materials, but the workmanship details are too poor. Some of the workmanship is passable, but the materials are too poor, and the first manifestation is that the dining table is very light.

1.Oak furniture material.

The oak wood texture is uniform and compact, the grain is beautiful and unique, and the wood has a strong decorative effect. Right.

2.Oak furniture wood grain.

Oak home has a unique wood grain, the clearer the wood grain, the higher the value, like the rain stone, the surface of the natural pattern of the pattern and "pictographic" stronger the better, the pattern and the real facts in the world closer to the higher the value.

3.Oak furniture color.

Naturally grown oak mainly has two classified tree species: red oak and white oak, and there is little difference between the two oak in the product material, and the core of the two oak wood is yellow-brown or reddish-brown. When buying oak furniture, you can carefully observe that there is a small amount of paint on the part of the furniture (such as whether the board is not combined, the back of the furniture board, etc.) or the part is protected by grease and oil to compare whether the color of the solid wood is pure.

4.Whether the oak furniture is dry.

Due to the particularly hard and heavy texture of oak, it is difficult to remove moisture. Many furniture manufacturers make furniture before the wood is dry, and it is easy to deform after a year and a half.

5.Oak furniture craftsmanship.

Whether the production is beautiful. The level of production of oak furniture on the market varies greatly. Some are quite beautiful, while others are rough. Whether the production is exquisite or not is also one of the references for identifying oak furniture.

1. Look at the color, that is, the lighter the color of the source paint, the better, and vice versa. Basically, the lighter the better, but there are still some laymen who will choose some darker colored furniture and floors, thinking that they look good.

2. Test weight, in addition to other decorations, the weight of wood means that its density is large, and the heavier the better.

3. Look at the whole, the appearance and wood can not be cracked, if there is a representative wood moisture when making. This not only affects the aesthetics, but also shortens the service life.

4. Look at the modeling, this is basically the wisdom of the benevolent and the wise, but the overall should be coordinated and matched with the interior decoration style, area, etc., including the use, and choose the right one for yourself.