I installed a Tenda wireless network card, and I heard that I could use wifi after installing it, bu

The main functions of the NIC and how to set it:

2. It can be set to AP mode to transmit WiFi signals for wireless devices, and the specific steps are as follows:

Is it a wireless router or a wireless network card? It is estimated that most of them are wireless routes, and you can turn on the search wifi signal option when setting up the network of your mobile phone and computer, and then follow the prompts to operate. btw：

It is best to set a wifi password for wireless routing, so as to effectively protect your information from being stolen and leaked.

WiFi small wireless LAN. You have a wireless card installed, but are you sure you have this small wireless LAN around you? There is no network, let alone install a wireless network card, even if you install ten wireless network cards, it is useless.

Tengda this wireless network card does not have a small disc, this put on the *** on the demonstration screen, of course, if you often install computer hardware should also know, first insert the wireless network card after the computer will search for hardware, find hardware, if there is no driver in the computer, you will be asked to put in the disc to install the driver, at this time you can put a small disc (let the computer search and install the driver) to save yourself from clicking to install other useless drivers.

1. The wireless network card is just a platform that can provide wireless Internet access, after installing the driver, there is a wireless network connection icon, and there is basically no problem to search for the wireless signal of the router.

If WZC is enabled, you can try to uninstall the driver and reinstall it.

2. After connecting to the signal, the key to whether you can go to the Internet depends on whether the router is set up to go online, you need to check whether the router can connect the network cable directly to the computer when you don't use the wireless network card.

3. If the router is directly connected to the computer and can access the Internet normally, check the status of the wireless network connection to see if the IP address is obtained from the IP address assigned by the router.

It's very simple, first on the official website of tenda.

How to use a TENDA wireless card? Did you know after reading it?

There are two reasons for this:

1. The AP mode of the router is not set properly, check whether there is any problem with the bridge setting of the main router and the setting of the LAN port.

2. If there is an unlimited network card, check whether the IP address is automatically obtained.

3. If there is no problem with the above, it is recommended to re-create the network card driver.

For detailed solutions, please refer to it.