Which battery is good for natural gas meter? What is the function of the battery of a natural gas me

Natural gas meters are generally equipped with electronic displays, such as IC card meters, and Internet of Things meters require the installation of batteries. As for which battery is better, to be honest, the power consumption of the display screen of the gas card meter is particularly low, the most common No. 5 battery, both can be used for several years, so there is no need to equip the battery with a good one, the simplest alkaline No. 5 battery can be two.

The role of the battery:

1. It is used to supply power to the circuit board inside the natural gas meter and complete the metering of your gas consumption.

2. If there is an abnormality, the natural gas meter will also close the internal valve through the electricity of the battery, especially when someone steals gas.

3. If your gas meter has an LCD display, the battery is also used to display your gas consumption information.

So the role of this battery, such as the power supply of remote signal data transmission, such as the power supply of the liquid crystal display panel liquid crystal display, such as the power supply of the operation button. This is done by using its battery as a power source.

The natural gas meter needs to be equipped with a battery, and some battery card slots will have a card bar stuck with the battery, and the battery with a large space can be removed to install the battery.

The gas meter is generally equipped with four No. 5 batteries.

The period of use is about three months to six months. There is no danger in replacing the gas meter battery, and residents can replace it themselves. When the battery voltage is too low, the gas meter will give an audible and visual alarm to prompt the battery to be replaced.

If the battery is not replaced in time, the gas meter will alarm again in a short time and automatically close the valve and cut off the gas.

The appearance and model of the gas meter of each gas meter manufacturer are different, so before preparing to install or replace the battery, you need to understand the specific model of the gas meter and judge the battery ** setting, opening form, battery model and quantity.

Summary. If you have a gas meter, it's powered by the line.

Does the gas meter have a battery.

Hello customer, I am Mr. Muchen of the resource library, I have seen your problem, now I am calling the resource library and experts to analyze your problem, from which to choose the most suitable and closest to your actual situation to solve the solution for you, please give me a little time, I will solve it for you perfectly, right away

There are batteries. The model of the gas meter in each community is different, and the battery needs to be replaced according to the specific model of the gas meter, which may be on the top, bottom or under the LCD screen. The battery cover of the gas meter is fixed with screws, so the public can check it carefully when replacing it.

This customer, has already received the answer I provided for you, huh? Please ask me to provide you with the answer and service are you satisfied, you can give me a little attention, any follow-up questions can be asked to me, if you think my service is not bad, you can give me a small five-star it. 

I can't find the battery cover for this one.

Hello, yours doesn't have a battery. Is there no power on your side?

There is also a special seal, which cannot be moved. There is no gas supply at home, and there is no arrears, I think it is a battery problem.

It doesn't have a battery if you do it. It's not the battery.

Didn't you say they all have batteries?

I'm talking about most gas meters. But you're obviously the best. There is no battery. This kind of is also very rare, and most people are still using the boss's gas meter.

There are old versions.

If you're not in the middle of nowhere, there's no power outage. Then it's the line fault inside. Not a problem with the battery.

Do gas meters use external electricity?

If you have a gas meter, it's powered by the line.

The old version is battery-based.

Can't find a power line?

His power line won't be exposed. Otherwise, if you use it for a long time. He is prone to aging very quickly. It must have been hidden somehow.

You can go to a gas meter master here. He'll fix it for you.

I can only help you analyze the reasons. As for the problem of repairing the watch, it still depends on the master.

The difference between them is that dedicated batteries are safe and durable, while ordinary batteries are not as durable as dedicated ones.

Gas Meter Replacement Battery:

Due to the large number of gas meter brands on the market, the model of the gas meter in each community may be different, and users need to judge the battery location according to the specific model of the gas meter when replacing the battery, on the top of the gas meter or on the LCD display.

Below. Generally, the gas meter battery is used for about one year, and when the gas meter shows lo, it means that the gas meter needs to replace the battery, and you can directly open the box lid to replace the battery. The specific steps are as follows:

1.Open the lid of the natural gas battery card slot box as shown. Vistar watches three No. 5 batteries.

Zhengzhou Enron table four No. 5 battery intelligent remote transmission table four No. 5 battery.

2.Turn the three batteries at will to observe whether there is a digital display, and some indicate that the battery is still charged, and the power failure is caused by poor contact. If it still doesn't appear, follow the steps above to replace the battery with a new one.

3.If there is an electrolyte.

outflow, a small blade or screwdriver should be used.

Clean up the electrolyte that flows out of the used battery.

4.Once cleaned, install the new batteries in order. Priority is given to the inside of the gear strip, and then the outside of the gear strip is installed. After the installation is completed, you will hear a "click" sound, and the LCD screen will be displayed normally. Close the battery card slot cover, and the battery replacement process of the natural gas meter is completed.

It generally uses a No. 5 battery, but the number of cells used in the battery will be different because the design of each gas meter will be different. For smaller gas meters, you only need to install three No. 5 batteries to use, while for larger gas meters, you need four No. 5 batteries, depending on the type of gas meter you use.

Notes:If the natural gas meter needs to replace the battery, first close the valve, then locate the battery cover and open it. Then take out all the old batteries and replace them with new ones, and then close the lid and you can use it.

However, when installing, you need to pay attention to the position of the positive and negative poles, and you can't install it wrongly, otherwise it can't be used. Also, do not mix old and new batteries, as this will affect the service life of the gas meter.

The battery inside the natural gas meter supplies power to the metering system and also controls the solenoid valve. When there is a leakage alarm slag, the alarm will give a signal to the solenoid valve relay, and then the electric hail magnetic valve will be closed, and if the balance of the pre-stored natural gas quantity is insufficient, the solenoid valve will also act. All this electricity comes from these batteries.

Card reading, metering, opening and closing solenoid valves.

Natural gas meters with batteries are prepaid gas meters, and the role of the battery:

1. It is used to supply power to the circuit board inside the natural gas meter to complete the measurement of gas consumption 2. If there is an abnormality, the natural gas meter will also close the internal valve through the electricity of the battery, especially when someone steals gas.

3. If the gas meter at home has an LCD display, the battery is also used to display gas consumption information.

4. After the battery is removed, the valve inside the natural gas meter will be closed.

The battery on the natural gas meter is used according to the package. Batteries without a lead seal are the energy source that displays flow data and is not metered. The availability of electricity does not affect the metering. Batteries with lead seals participate in the metering function, and the metering function is dysfunctional and cannot be metered when there is no electricity.

Prepaid household natural gas meter battery is involved in the display of flow data, but also in flow control, and the battery is removed to cut off the gas supply.