If you want to lay wooden floors at home, how to distinguish the quality of wooden floors?

To judge the quality of wood flooring, it is necessary to distinguish many details such as paint and moisture content on the surface of the floor, as well as cracks in the floor, texture and color difference.

Nowadays, when many people are decorating, they may choose to lay wooden floors on the entire floor, thinking that this is very natural and looks environmentally friendly. In fact, in terms of wood floor selection, there are many problems that need to be paid attention to, otherwise it is easy to buy some inferior wood flooring, which will affect the later life.

1. Paint on the surface of the wooden floor.

Normally, solid wood flooring will be coated with a layer of paint film on the surface during the manufacturing process to make the floor look more textured, so when we buy wood flooring, we must check whether the paint on the surface is leaking. Good paint will make the floor look more high-end, while poor quality paint will ruin the whole floor and easily affect the foot feel in the later stage. In addition, it is also necessary to see if there are air bubbles on the surface of the wood floor, which will also affect the quality of the solid wood floor.

2. The texture and color difference of the surface of the wooden floor.

Since our solid wood flooring is extracted from some natural wood blocks in nature, there will be some irregular texture and serious color difference, which are normal phenomena. If there are cracks on the surface of the wooden floor, it proves that the quality of the floor is not very good, after all, the crack and the texture are not the same texture, and the color difference will not change in the later stage, and the crack will seriously affect the quality of the floor after a long period of use.

3. Moisture content of wooden flooring.

To distinguish between high quality and inferior wood flooring, we have a very important judgment index, which is its moisture content. Under normal circumstances, the moisture content of the high-quality solid wood floor will meet the national standard requirements, but if the moisture content is insufficient or seriously exceeds the moisture content to a certain extent, it proves that there is a certain quality problem in the wood floor. Therefore, the moisture content is not always better, and it must be within a certain range to prove that the quality of the wood flooring is very good.

You can choose some international brands of flooring, check whether his wood board is reprinted, the degree of fineness, you can ask the merchant for a sample wood floor, with metal or nails to scratch hard, if you can't see the scratch, it means that the scratch resistance is better.

To choose a heavier quality floor, such a floor has good stability, too soft the floor will be easy to expand, depending on whether the wood contains oil, the stability of the floor he uses will be very good, and cracks will not appear easily.

It is necessary to know about wood flooring, pay attention to the density of the color, and also pay attention to the structure of the material, through which it is possible to distinguish the quality of the wood floor.

You should understand the common sense about wood flooring, pay attention to the density of color, and pay attention to the layout of the data, and perhaps distinguish the benefits and disadvantages of wood flooring through these asana patterns.

To decide on a heavier floor, if the floor stability is good, the floor that is too soft will easily expand, depending on whether the wood contains oil, the stability of the floor will be very good, and it will not easily crack.

To distinguish the quality of wood flooring, you can check and accept it according to the following methods:

1. There is no jagged expansion joint on the floor;

2. The nut shall not be higher than the surface of the buckle;

3. The flatness of the floor surface is within the standard range;

4. The length and position are appropriate, and the height difference of the joints on the floor surface is not more than 0;

5. The floor should be laid firmly, the door can be opened freely, the contact surface of the baseboard should be smooth, and the turtle banquet should be cracked, not loosened and stained;

6. Scratches and other appearance quality problems, the distance from the wall is 8-12mm, the corner is dropped, there is no abnormal sound when stepping on it, and the paint film falls off The beam will be accepted within 3 days after the floor paving is completed;

7. The strip should be fixed firmly;

8. The cutting of the door and door sleeve is straight and smooth, the gap is not more than 0, and there is no glue mark on the surface of the floor;

9. The nail eye is repaired, and the corner is straight.

You can ask the merchant for the floor head of the selected floor, scrape and scratch the surface of the floor several times with a metal key or nail, and then rub the scratch repeatedly with the palm of your hand. If you can't see scratches at all, it means that it is more scratch-resistant; If you can see obvious scratches or see the bottom plate, it means that the wear resistance of the floor is not up to standard, and the quality is not good.

The problem is too broad, there are so many indicators involved in the quality of wood flooring that you can't compare them all, and it makes no sense to do so. The quality of wood flooring is a comprehensive index, and the indicators that often need to be considered are: what material?

Is there a dead knot and how many dead knots there are? Is it a surface patch? Paint fastness?

How dry is it? Is it insecticidal? Color, color difference, and finally ** and installation and so on.

Generally speaking, the brand has a certain guarantee for the quality of the floor.

If you can, consider something new with a bit of technology, such as solid wood multi-layer flooring.

Acceptance will be carried out within 3 days after the completion of floor paving;

1. The door and door sleeve are cut straight and smooth, and the door can be opened freely;

2. The fastener should be fixed firmly, and the nut should not be higher than the surface of the fastener, and the length and position should be appropriate;

3. There are no appearance quality problems such as glue marks, stains, corners, cracks, paint film peeling, scratches and other appearance quality problems on the surface of the floor;

4. There is no jagged expansion joint on the floor, and the distance from the wall is 8-12mm;

5. The flatness of the floor surface is within the standard range, measured with a 2-meter ruler, and the gap between the ruler and the ground should be less than 3mm;

6. The contact surface of the baseboard is smooth, the corner is straight, and the nail eye is repaired;

7. The height difference of the joints on the surface of the floor is not greater than that, and the gap is not greater than;

8. The floor should be laid firmly, not loose, and there should be no abnormal sound when stepping on it;

9. The special cushion blocks at the seams are taken out.