Sony notebook memory module incompatibility issue

0x0000007e:system_thread_exception_not_handled

Error Analysis: A system process produces an error that cannot be caught by the Windows Error Handler. It can occur for a number of reasons, including hardware compatibility, faulty drivers or system services, or certain software.

The reason for the blue screen is generally hardware incompatibility, such as memory, etc., driver incompatibility, etc., in addition, the system failure program and the system conflict will also be blue screen, the most important thing is that you should pay attention to the performance of the computer before and after the blue screen, the general blue screen** ordinary people are not incomprehensible, if you will say the performance of the computer before and after the blue screen, what program software, what hardware has been upgraded, or is there anything abnormal about the hardware on the computer? My question will be more targeted (you can add that solving the blue screen requires analyzing the approximate cause of the computer's performance in front of the blue screen and your operation). If you don't often have a blue screen shutdown at boot, you can do it at boot, at most press F8 to do not move to the advanced option when you let go, select "The latest correct configuration" Enter to repair, and it is not possible to restore the system or reinstall the system.

Go to the Device Manager and check if there are any conflicting places with the various drivers, and if there are any yellow ones! If there is a possibility that the device driver is incompatible with the system; Then delete the drivers of the sound card, graphics card, network card and other devices, and then install the drivers one by one, restart the computer every time you install a device, to check which device's driver caused the failure, find out, ** the new version of the driver of the faulty device, and then install it. Then clean the dust in the computer, clean the gold finger of the memory, graphics card and other equipment, and reinstall the memory and other equipment.

In addition, the upgrade hardware is incompatible, memory, graphics card, hard disk, etc. incompatible or faulty can also lead to blue screen failure, and test whether the hardware temperature is too high (if it is caused by hardware, you can't solve it yourself, please repair it).

It is best to change the memory to the same model, the same size.

If you want to have a dual channel, you can buy a brand with the same frequency, and it's definitely no problem.

That is, just buy a Kingston 4G DDR3 1600 notebook memory module.

Go ahead and shop for the Kingston DDR3 1600MHz 4GB Laptop Memory Module.

DDR3's memory module is a good match, be sure to buy the same memory.

Just buy a Kingston DDR3 1600MHz 4GB one. Install 64 as a system? If 32 for the system, it supports up to right and left. 4G is already wasted. It's useless to add it.

Add another strip of Kingston DDR31600 4G and you're good to go. Be sure**.

The safest is also Kingston's.

When the laptop is incompatible with the memory module, there will be a blue screen phenomenon, the laptop will alarm when it is turned on, and the laptop will not turn on.

Now the memory is divided into |The algebra of DDR, DDR2, and DDR3 is useless if the purchased memory algebra does not match the original memory algebra.

1. Memory module.

A memory module is a part of a computer that can be addressed by the CPU and can be read and written.

Memory modules used to be an extension of the main memory in the history of personal computers.

With the continuous update of computer software and hardware technology, memory modules have become the whole of read and write memory.

The size of a computer's RAM is the total capacity of a memory module.

Memory modules are an essential part of a computer, and the CPU can address the memory through the data bus.

There is main memory on the motherboard of a computer, and a memory module is an extension of the main memory.

There is no main memory on the motherboard of the computer, and the CPU is completely dependent on memory modules.

All content on external memory must pass through memory in order to function.

2. Compatibility.

Compatibility refers to the degree to which hardware, software, or a combination of hardware and software systems work in harmony with each other.

The concept of compatibility is relatively wide, relative to hardware, several different computer parts, such as CPU, motherboard, graphics card.

If they can cooperate with each other and work stably when working, it is said that the compatibility between them is relatively good, and vice versa, the compatibility is not good.

As long as the pin of that thing is suitable, you can use it with the same brand model, your memory module is Samsung DDR3 1333MHz 2GB, so it's best to buy Samsung DDR3 1333MHz 2GB, you just plug in two memory sticks, the capacity is 4G, the worst is also equipped with Samsung's goods, in order to facilitate compatibility, or just get a 4G memory stick, just plug in a 4G one.

If there are only 2 hangings you give,I'll choose the first one,The most important thing for dual memory is to match the frequency,Mismatch will cause abnormal displays。

It does not read the memory vendor information when it is displayed normally, so it generally has little to do with the vendor.

It depends on your notebook, what is the original! Mine is also Sony, an original is not Kingston 2G, I bought a 4GDDR3 Kingston on JD.com, it feels good!

Use the following Samsung's, but the frequency is 1600, and the one in front of you is 1333, so add the two together, and your memory frequency is still 1333, it is recommended to buy Samsung Samsung DDR3 2G 30nm, 1333Mbps notebook memory.

Anyway, my Sony laptop is added to Kingston, and there is no problem at all.

1: Kingston Kingston DDR3 1333 2G notebook memory module compatible with 1066, I added OK.

If you want to add memory to this notebook, it's best to add a 512M,But you only have one memory slot, and you can only change it1G.

Kingston DDR1-333

512m185 yuan.

Kingston DDR1-333

1g350 yuan.

Hello,If you add memory,It is recommended to use the same brand and frequency,Compatibility will be the best,At present, almost all notebooks support dual channels,Add to 6G memory,There is still a certain improvement in system operation,If you don't know much about hardware upgrades,You can get Lenovo service station to upgrade work。

Lenovo service outlets:

I think it can be added, the possibility of incompatibility is very small.

However, it is estimated that the performance improvement will not be significant.

It is recommended that you change the operating system win7 32-bit will be much better.

Existing brands of notebook memory are available, and this one is compatible with each other.

The key is to understand that the memory used in the notebook is the first generation of DDR memory, such as DDR2 and DDR3 memory modules, which cannot be mixed with each other.

Then figure out the working parameters of the notebook's memory. This can be used with e.g. Master Lu or hardware detection tools such as CPU-Z software to detect what the hardware is, and you will know the brand of your memory and the working parameters.

If you want to mix old memory, you need to disassemble the notebook and check whether there are any free memory slots inside the notebook. If there is no free slot, then if you want to use more memory, you can only take the old memory and replace it with a new larger memory.

Replacing memory can theoretically be mixed with the same generation of memory, and the same parameter and brand are different. But it's just a theory, and it actually needs to be connected to the boot test, which is generally no problem.

VGN-CS36 series most of the Samsung memory,You can take it apart and take a look at it yourself,There is a removable cover under the background,It is not recommended that you add memory,Because you install the Vista Ultimate system,32-bit system supports up to 3G or so memory,Installation can not be fully utilized,It is recommended that you downgrade the system XP,With your configuration,You will feel the speed like flying,Sony officially has a complete set of drivers,You don't have to worry about compatibility problems, If you like the effect of Vista, it is recommended to upgrade to Windows 7The speed has also been improved. Now you know, there is no 4G memory book sold, o(o

Use Kingston's, the compatibility is good. I also use his 2g **, which is about 200.

What brand of memory did you use before, what brand of memory do you use now! But now it's all dual-channel, and any brand can be used.

The notebook can generally be inserted with two memory sticks, should be equipped with DDR31600, but it is not recommended to buy it at will and install it, because there is a compatibility problem with the original memory, if it is not good, there will be a blue screen or even can't turn on the machine, then you have to find a merchant to replace, so it is recommended to bring the notebook to the computer city to find a notebook memory and let him help you expand a 2G DDR3 1600 memory, the reason is that when the problem of expanding the memory is easy to solve, it is cheap and will not have a problem.

DDR2667 to 800 should be fine, but it's best to check with a Sony store. In addition, I don't think it's necessary to add 3-4G at all, because it won't be used at all. Generally, a maximum of 3G is enough, because the maximum limit it can use is actually only memory.

You can buy DDR2-533 memory of this model, plus a 1GB capacity, **Around 140, if you are a brand, Kingston, ADATA, Apacer, etc

You can directly take the computer to the merchant, and let the merchant install it on the spot after buying the memory to ensure compatibility.

It seemed to rattle happily. Drought is its love song.

The Remembrance Day poem is dedicated to those who died in the war.

But the generation of remembrance is also dwindling and dying, half of them are old and the other half is about to die, and who will remember those who remember.

According to your words, your memory is 2 generations of memory, and if you want to upgrade, you can disassemble one and add a 1G enterprising.

It is recommended that you add another 512 memory, because it is also a waste to add 1G to your allocation.

You go to the computer city to buy a memory module, and ask the technician to help you install it, so you don't have to worry about it.

Yes, it would be better to buy a compatibility with the same frequency.

The same memory as my VGN-C12C B, I took it apart and looked at it, a 512 and a 256 bar, I am hesitant now whether to directly change to a 2G DDR2 bar, or buy a 1G DDR2 bar. Don't know which one to buy?