Can honeysuckle be replanted? Please, 3Q

Honeysuckle, also known as honeysuckle and double flower, is a honeysuckle family, with flower buds and vine (honeysuckle vine) human medicine. It has the function of clearing heat and detoxifying, and is mainly used to treat heat poisonous swelling and ulcers, carbuncle boils, external wind heat, acute pharyngitis, tonsillitis, heat poisoning diarrhea and other diseases. It is mainly produced in Shandong, Henan and other provinces, and is now cultivated all over the country.

Honeysuckle is hardy, drought-tolerant, and salinity-tolerant. Prefer sunshine. Acidic, alkaline and saline-alkali land can grow, and the adaptability is strong.

The taproot is deep, the root system is well developed, and it grows well on loose and fertile sandy loam soils. It can be planted in mountains, hills, plains, dikes, and around the courtyard in front of and behind the house. Seed propagation and cuttings are used, but the production is mainly propagated by cuttings, with high survival rate and early returns.

Cuttings propagation is divided into two methods: direct cuttings and cuttings for seedling rearing. Direct cuttings in the rainy season of summer and autumn, when the soil and air humidity are large, select 1 2-year-old, disease-free pest-free strong branches cut into 30 40 cm long cuttings, cut off the lower leaves, cut the end of the lower branches into an inclined plane, be careful not to hurt the plant, and then dig the hole according to the plant row spacing of 130 cm x 160 cm, and insert it directly in the hole while it is fresh. The depth of the hole is 25 30 cm, 2 3 plants are inserted in each hole, the cuttings are 24 human soil, the ground is exposed 1 3, the soil is filled tightly, and the cuttings are watered so that the cuttings are closely combined with the soil.

If the lower end of the branch is soaked in 2000 mg needle solution of naeacetic acid for 15 seconds or in human urine for a few minutes before cutting, it can promote hair roots and greatly improve the seedling rate. Cuttings seedlings in spring and summer, select the lot with water source, apply manure 2000 kg per 667 square meters 2500 kg, plough the soil, 20 25 cm deep, and make a seedbed of 1 3 meters after leveling the rake. According to the row spacing of 25 cm x 25 cm, open a 20 cm deep furrow.

Select 1 2-year-old strong, pest-free shoots, cut them into 25 30 cm long cuttings, remove the lower leaves, and leave a pair of leaves on the upper part. According to the previous method, the ditch is obliquely inserted, the soil is compacted, and the water is immediately watered. In case of drought, water once every 2 3 days after cutting, and it can take root and sprout after 20 days.

Transplanted in late autumn or spring of the following year.

I can insert it alive and mix it with mud and sand and keep plenty of water!

If you want to make the honeysuckle cutting, then it is best to carry out it in the rainy weather in summer and autumn, the branches need to be robust and disease-free and 1-2 years old, the cuttings should have a certain depth, after the cuttings are good, you need to water appropriately, and then the honeysuckle should be sprayed every 2 days or so, and the plants can not be exposed to the sun.

1. Cutting time

If you want to make honeysuckle cuttings, then you need to do it at the right time, according to the habits of the plant, it is best to take cuttings in rainy weather in summer and autumn, which is most conducive to the growth of honeysuckle roots, and the survival rate can also be improved a lot, and it is not suitable for cuttings in winter and dry season.

2. Branch requirements

If you want to make the honeysuckle cuttings, then we need to choose a strong and disease-free 1-2-year-old honeysuckle branch as a cutting, the length of 30-35 cm can be, after the cuttings are cut off from the mother plant, the imitation leaves at the bottom of the honeysuckle should be cut off, and the rooting agent can be used to treat it before cuttings, which is more conducive to its survival.

3. Cutting method

When cutting honeysuckle, the soil substrate is required to be loose and breathable type, first dig out a 16-18 cm pit of the soil, and then put the honeysuckle branches in, and fill the soil compacted, the ground part can be exposed 7-10 cm, after the cuttings are good, the appropriate amount of hail should be watered, so that the soil is in a slightly moist state.

4. Maintenance management

After honeysuckle cuttings, it is also necessary to do a good job of maintenance management, at this time it is best to spray water every 2 days on the left and right for it, during which attention can not be allowed to let the plant be exposed to strong light, so that honeysuckle can survive, if the maintenance is done properly, about half a month honeysuckle can take root, and wait until the spring and autumn of the second year to be planted.

Honeysuckle cuttings can be planted.

Honeysuckle is a very adaptable plant, but if you want its cuttings to survive a little better, we need to choose thick branches that grow more robustly and disease-free to cuttings, and before cuttings, you need to put them in a ventilated place to dry the water on the surface of the incision.

If you want to use the cuttings of honeysuckle, you need to use suitable soil, it is best to choose a relatively loose and breathable and well-drained soil type, it is best not to use too clay soil, and the soil needs to eliminate jujube guessing before use, so as to avoid the cuttings being infected with germs and rotting.

If you want to put the cuttings of honeysuckle alive, you also need to take cuttings at the right time, according to the growth habit of honeysuckle, it is most suitable to take cuttings in the spring of each year, the weather is warm at this time, it is in the vigorous growth period, it can quickly take root after cuttings, so that the survival rate can be improved.

Methods of maintenance of honeysuckle

1. Soil preparation.

Honeysuckle likes loose and fertile, acidic soil with strong water and fertilizer retention ability, in the process of maintaining the plant, you can mix sandy soil and pine needle humus to prepare soil, pay attention to the soil to be sieved before use, when the honeysuckle is potted, you need to cover a layer of broken tiles.

2. Plenty of sunshine.

In the process of maintaining honeysuckle, it is necessary to ensure that the sunlight provided to the plant is sufficient, and the honeysuckle can be placed in a sunny place to promote the photosynthesis of the leaves, which is conducive to the growth of the plant, and if the sun is sufficient, it will lead to the small leaves of the honeysuckle.

3. Watering method.

It is best to use river water or rainwater to water honeysuckle, if you want to use tap water, you need to dry the tap water, reduce the amount of watering in winter to prevent frost damage to the plants, and gradually increase the amount of watering in spring and autumn to promote the growth of honeysuckle.

OK. There are many methods of propagation of honeysuckle, mainly cuttings, striping and branching. The most commonly used method is cuttings, because the rooting speed of this method will be relatively fast, and the technology is also very simple and easy to promote.

Cuttings can be made in the spring or during the rainy season.

After the cuttings take root, transplant them to pots, first slow down in a cool place for 5-7 days, and then move to a sunny place to dry more.

Summer is the season when honeysuckle grows fast and blooms more, so the amount of watering must keep up, and if you find that the potting soil is completely dry, you will water it to ensure that it is moist, but don't let the pot accumulate water, once the water accumulates, it is easy to drop the leaves.

Honeysuckle lives in sunny and rain-rich places, and can grow better in hilly and hilly slopes, so when cultivating, it is necessary to pay attention to choosing a place with better sex, and the thickness of the soil should be sufficient, and it should be more fertile.

Honeysuckle branches can be inserted, the survival rate is relatively high in the correct way, and the cutting method is as follows: cut the cuttings: the cuttings are selected for 1-2 years, and must ensure that the growth is robust, and each section is 20-25 cm long.

Preparation substrate: pure river sand can be used, can also be doped with humus, must be disinfected before it can be used. Cuttings into the soil:

Start by poking a hole in the surface of the soil, inserting cuttings, compacting the soil and watering thoroughly. Later maintenance: ensure that the soil is slightly moist and well ventilated, and it can take root in about half a month.

The thick branches of honeysuckle can be inserted, and it is a very adaptable plant. If you want to make its survival rate higher, you need to choose a relatively robust and disease-free thick branch to cutting, the soil needs to be loose, breathable and well-drained soil type, the best time for cuttings is in the spring of each year, and maintenance management is also needed after cuttings.

1. It can be plugged in

The thick branches of honeysuckle can be cut alive, it is a very adaptable plant, but if you want its thick branch cuttings to improve the survival rate, we need to choose a relatively robust and disease-free thick branch to cutting, and before cutting, it needs to be placed in a ventilated place to dry the moisture on the surface of its incision.

2. Soil requirements

If you want to use the thick cuttings of honeysuckle, you also need to use suitable soil, it is best to choose a more loose, breathable and well-drained soil type, it is best not to use too sticky soil, and the soil needs to be disinfected before use, so as not to infect the cuttings with germs and rot.

3. Cutting time

If you want to put the cuttings of honeysuckle alive, you also need to take cuttings at the right time, according to the growth habit of honeysuckle, it is most suitable to take cuttings in the spring of each year, the weather is warm at this time, it is in the vigorous growth period, it can quickly take root after cuttings, so that the survival rate can be improved.

4. Cuttings maintenance

After cuttings, it is necessary to do a good job of maintenance management, at this time it is necessary to water appropriately, keep the soil slightly moist is the most appropriate, not too dry or too wet, and at the same time to maintain it in a semi-shaded and ventilated environment, it is best to control the temperature at about 20 during the period, so that it is easier to survive.