Is it okay to change the current tires to 225 60 R16 tires for 215 65 R16 tires?

Tires should be checked every 6,000 to 8,000 km for abnormal wear, tire pressure should be checked and front wheel alignment checked.

Improper use and maintenance of tires can cause danger

Overloading may cause excessive friction of the tires and cause a puncture, so please pay attention to the maximum load of the tires.

The tire pressure is insufficient, it wears to the tire lip, and the fetal belly is easy to burst.

Excessive tire pressure will cause tread wear of the tire**.

Worn-out tires can lead to accidents, and the tread may be smoothed out by the wheels for too long, so replace the old tires as soon as possible.

It's best to use what kind of tires are from the factory, unless you have special needs.

The specifications are not the same, so they cannot be used together.

They can be used with each other, but all tires must be replaced at the same time (all tires must be of the same model), and your 205 55R16 is marked with the model number: 205 for the tire width, 55 for the tire aspect ratio, and R for the tire widthThe radial wheel excites the triumph, 16 indicates the size of the tire rim. So, if you change to an aspect ratio of 60, the tires can be universal, the difference is that the tires have a higher tread.

Tire Introduction:

Tires are ring-shaped elastic rubber products that are grounded and rolled on various vehicles or machinery. Usually mounted on metal rims.

It can support the body body, cushion the external impact, realize the contact with the road surface and ensure the driving performance of the vehicle.

Tires are often used under complex and harsh conditions, and they bear various deformations, loads, forces, and high and low temperatures when driving, so they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, high abrasion resistance and flexural resistance, as well as low rolling resistance and heat generation are required.

Interoperable. The radius of the 205 60 R16 tires is one millimeter larger than that of the 205 55 R16 tires, the tire width is the same, and the hub diameter is the same. If you want to modify, depending on whether your car is front-wheel drive or rear-wheel drive, if it is a front-wheel drive car, then install it on the rear wheels, if it is a rear-wheel drive car, then install it on the front wheels, so that the driving force of the vehicle will not be reduced.

The tire diameter of 205 55R16 is, and the tire diameter of 205 60R16 is, and their circumference is different, which is equivalent to a difference in kilometers for every 100 kilometers driven, and it can also be said that their speed is different. This value exceeds the national speed error standard of no more than 2%, which will lead to inaccurate speed and mileage display.

In addition, the 205 55R16 tires have a smaller flat ratio and less side bias, so it handles better than the 205 60R16 tires and has more precise steering, but it is not as comfortable as the 205 60R16 tires. If the subject wants to replace a higher-level tire, my personal suggestion is to replace the 215 50R16, this tire has a wider tread, better adhesion to the ground, better handling, and a little more than 1% speed error with the original tire, and it looks more beautiful.

205 55R represents tire width, 55 represents tire thickness, and 16 represents tire size, which I believe everyone knows. But you can't deny it all at once. Generally speaking, you will first be asked what year of the model you are going to install and what kind of data wheels you are using now, and then calculate the tires according to your model.

Each model, each wheel data has a range of application value, especially the difference between the diameter of the old and new tires is best controlled within 3%, and then according to the difference value to calculate the actual speed of 100km h, how much the speedometer displays! (Generally, there are tire calculators on automobile forum platforms that can be used as a reference). The thinner the tire, the worse the comfort, and the thicker the tire, the better the comfort.

Of course, in the end, it depends on what kind of nature you are, the modification category or the original factory else, the general modification category of consumers themselves upgraded the wheels in order to look good in the car, with a tire error of about 3% They are also acceptable, but the speedometer is a little wrong. But if you are an original consumer and most of the cars are used at home, it is normal to upgrade the thickness from 55 to 60 to ensure comfort. Finally, let's confirm again:

What car to change? in order to get the final result.

The thickness is not the same, and it can't be interchanged.

This is due to a keypad lock issue.

Find the button with the word fn on the keyboard, find the key with the word num on the keyboard, hold down the fn key, click the key with the word num, and that's it, if you do it again, it will become a number, this is a toggle function.

The specific brand of notebook buttons may be different.

If you need to change the tire specifications, you must go to a professional tuning shop to upgrade the tires, or consult the car manufacturer.

An important rule of thumb for tyre specification changes is that the upgraded tyre is the same or similar to the total diameter of the original tyre.

From this point of view, the outer diameter of 205 55 R16 and 205 60 R16 tires is quite different, so it is not recommended.

It is very important that the total diameter of the upgraded tire is the same or similar to that of the original tire, and the purpose of this is to: 1. Keep the transmission unchanged. 2. Keep the odometer reading accurate.

3. Ensure that the anti-lock braking system (ABS) works normally, and the ABS system works by monitoring the relative wheel speed. If the total diameter of the tire and rim combination changes too much, it will affect the effectiveness of the ABS. 4. Traction control system:

Stable control system and much more.

1. Theoretically, it can be replaced. The rim size is the same, but there is a difference in the tire width: 215 225, the latter is a little wider. And the flattening rate is above: 60 50, the latter is a little "lower", and in layman's terms, it is a "book".

2. The following problems will occur in practical application:

1) Influence driving parameters, such as speedometer.

2) Affect acceleration performance.

3) Reduced safety performance. Non-OEM matching tires.

4) Due to the decrease in flattening rate, in addition to the decrease in safety performance, the adaptation to the road surface has decreased (according to the body design and vehicle weight).

3. It is recommended to replace the original tires of the same model.

Summary. Hello, I am glad to answer for you, the tires of the original car 225 60 R 17 can be replaced with 225 65 R 17 The answer is as follows: tires can be universal.

The inner diameter size is the same, both are 17 inches. The problem is mainly manifested in the flatness of the tire. When replacing tires, you should remember that you can't mix tires with different types, different models, and different carcass structures on the same car, and tires on the same axle should be prevented from mixing, if you want to replace one side of the tire, the other side should also be replaced at the same time.

Can the tires of the original 225 60R 17 be changed to the 225 65R 17?

Hello, I am glad to answer for you, the tires of the original car 225 60 R 17 can be replaced with 225 65 R 17 The answer is as follows: tires can be universal. The inner diameter size is the same, both are 17 inches.

The problem is mainly manifested in the flatness of the tire. When replacing tires, you should remember that you can't mix tires with different types, different models, and different carcass structures on the same car, and tires on the same axle should be prevented from mixing, if you want to replace one side of the tire, the other side should also be replaced at the same time.

The choice of tires is closely related to the performance of the vehicle, some people replace the original tires with wide tires to think it is safer, but in the case of the same engine and car weight, switching to too wide tires will make the tires grip not enough, and it may be unsafe to skid on wet roads. For the car running the highway should pay more attention to the tires, to always check whether the tires are damaged, whether the air pressure is up to standard, because the car on the highway at high speed once the tire burst, the whole car will instantly produce a strong deflection torque, the driver is unable to control the direction of the car, it is very likely to occur the car crash accident, so the quality and selection of tires should not be underestimated.

No, the diameter of the R16 steel ring is large, and the 205 65R15 cannot be installed.

Tire parameter 205 is the cross-sectional width of the tire is 205 mm, 55 represents the flat ratio of the tire, that is, the percentage of the tire cross-sectional height divided by the tire width, R represents the radial tire, and 16 represents the rim diameter of 16 inches.

The size of the tire is generally a set of numbers, the first number indicates the width of the tire section, and the latter number indicates the rim diameter, both in inches. The letters or symbols in the middle have special meanings: x for high-pressure tires, r, z for radial tires, and one for low-pressure tires.