The tire model is 205 55R16, what kind of change is good?

Hello! Depending on the tire specifications you offer, Michelin recommends you:

Primacy 3 st Haoyue is a high-end comfort pattern. It is characterized by comfortable driving and low tire noise when driving. It is suitable for owners who pay special attention to the dry and wet braking performance of their tires, and want to maintain the excellent comfort of their tires while maintaining some handling.

For more information, please refer to:

You can also log in.

Search by tire size and find out the right tires for your car.

In fact, I think that the tires of the car are selected according to the preferences of the owner, and the purpose is to choose ,,, 16 inches is too small, if I install the minimum 18, otherwise it will be too stingy. . . Tires also affect the safety factor and violate relevant Chinese regulations.

Big brands can be trusted.

The original size is good.

The tire model is 205 55R16 for 205 55R16 is good.

First of all, it is recommended that the specifications of the tires purchased should be consistent with the specifications of the tires assembled in the original car, if you need to change the tire specifications, you must go to a professional tuning shop for tire upgrades, or consult the car manufacturer.

There are various factors to consider when modifying tires:

1.Local traffic regulations (will not affect the annual inspection of the vehicle, vehicle warranty, etc.);

2.speed and load index of the tire;

3.Rim specifications, such as width and offset, etc.;

4.Space; 5.the suspension system of the car;

6.The (important) weight radius of the tires remains the same.

The 205 55R16 on the tires is the size of the tire.

where 205 represents the width of the tire section, that is, the width of the tire is 205mm, and the width of the general tire is between 145-285mm, and the interval is 10mm; 55 is the flat ratio.

Tire specifications are usually represented by a set of numbers:

The first number represents the width of the tire section, and the second number represents the diameter of the rim, all in inches. The letter or symbol in the middle has a special meaning: "X" means high-pressure tires; "R" and "Z" are radial tires; "One" refers to low-pressure tires.

The production lot number of a tire is marked with a set of numbers and letters that indicate the date and quantity of production.

The 205 55R16 indicates the size of the tire.

205: Cross-sectional width (mm).

55: The aspect ratio is 55%.

r:r=radial tire structure.

16: Rim diameter is 16 inches.

Hello, on behalf of the tire, width and height, radius.

This is the model number of the tire, which represents the width of the tire, the height of the inner ring size.

205 55R16 tires mean: 205 refers to the cross-sectional width of the tire is 205 mm, 55 represents the flat ratio of the tire, which is the percentage of the cross-sectional height of the tire divided by the tire width, R represents the radial tire, and 16 represents the rim diameter of 16 inches.

Tires are ring-shaped elastic rubber products that are grounded and rolled on various vehicles or machinery. Tires are often used under complex and harsh conditions, and they bear various deformations, loads, forces, and high and low temperatures when driving, so they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, high abrasion resistance and flexural resistance, as well as low rolling resistance and heat generation are required.

Replacement is not recommended. The diameter of the 205 55R16 tire is centimeters, and the diameter of the 205 65R16 tire is centimeters, and the diameter of the whole tire is different by centimeters, so the speedometer is 6% slower than the actual speed, such as running to 100, the speedometer only shows 94. The gap with the original car is relatively large, and it is not recommended to replace it.

If the tire is too large, the most direct impact is that the tire may rub against the wheel arch and lining, as well as the suspension spring base, etc., and the tire may be stuck when steering. The subject wants to change to thick tires to improve comfort.

When changing tires, it is best not to exceed 5% of the size of the original car, if you want to improve the comfort, you can change it to 205 60R16, which is relatively suitable. After the tires are changed, the fuel consumption may increase in response, and the original tires must be changed back to the original when the car is reviewed.

The differences are as follows: 205: The tire width is 205 mm; 55:

It is called the flattening rate of the tire, which means: the ratio of sidewall height (sidewall) to tire width is 55%; r: wire radial tire, 16:

The diameter of the wheel is 16 inches. 205: The tire width is 205mm; 65:

It is called the flattening rate of the tire, which means: the ratio of sidewall height (sidewall) to tire width is 65%; r: wire radial tire, 16:

The diameter of the wheel is 16 inches.

Note: 1. Tires with different specifications and models and different pressure levels cannot be interchanged. 2. Air pressure is the lifeline of tires, too high and too low will shorten the service life of tires.

If the air pressure is too low, the deformation of the carcass will increase, the sidewall is prone to cracks, and at the same time, it will produce flexural motion, resulting in excessive heating, promoting rubber aging, cord layer fatigue, cord breakage, and will also increase the tire grounding area and accelerate shoulder wear. If the air pressure is too high, the tire cord will be subjected to excessive stretch deformation, the elasticity of the carcass will decrease, and the load on the car will increase during driving, and the impact will produce internal cracks and bursts, and at the same time, the high air pressure will also accelerate the wear of the tire crown, and reduce the rolling resistance.

Original 205 55R16 tires, can I change 215 55R16 tires? Why is it not recommended to replace.

Hello! This one doesn't work! The flattening rate of the two is not the same! Hope it helps.

It is very important that the total diameter of the upgraded tyre is the same or similar to that of the original tyre (for the following purposes), and it is not theoretically feasible.

1. Keep the transmission device unchanged.

2. Keep the odometer reading accurate.

3. Ensure that the anti-lock braking system (ABS) works normally, and the ABS system works by monitoring the relative wheel speed. If the total diameter of the tire and rim combination changes too much, it will affect the effectiveness of the ABS.

4. Traction control system: stable control system and so on.

Much larger than the diameter of the original car, it is recommended 215 55R16

Hello, 205 means that the width of the tire section is 205, 55 means that the flattening rate of the tire is fifty-five percent, R means the radial tire, 16 means the size of the tire, I hope it can help you, I wish you a happy car [If you have any questions about the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello! 205 refers to the width of the tire tread, 55 refers to the flatness of the tire, and 16 refers to the size of the wheel!

I hope it can help you, and I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, tire inner diameter, width, flattening ratio. I hope I can help you, if you have any questions, please continue to consult, your satisfaction with my pursuit! I wish you a happy Dragon Boat Festival! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, this is the model of the tire, which represents the tread width, the height of the shoulder, and the diameter of the inner circle [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

This is the specification model of the tire.

Hello tire size, if my answer is helpful to you please set it up thank you very much!

It cannot be replaced.

The diameter of the tire of 225 65 17 is, while the diameter of the tire of 235 55 17 is, and the difference between the diameters of the two is about.

Replacing tires of different sizes and specifications will cause hazards to driving safety.

It cannot be replaced.

225 65 17 wheels.

The tire diameter is, and the tire diameter of 235 55 17 is, and the difference in the diameter of the two is about to replace the tires with different sizes and sizes, which will cause harm to driving safety.

The tire diameter of 225 65 17 is, and the tire diameter of 235 55 17 is, the difference between the diameters of the two is about, although the same wheel hub is used, but the difference in tire diameter leads to the error of the speedometer will be very large, and it is not recommended to interchange it this way.