The electric fan doesn t turn on when it s not turned on, what s going on?

As long as the timing switch is rotated in the direction of opening (it may be necessary to rotate in the direction of opening to rotate to reach the position where the timing is not turned on, and the force should be light). Electric fanIt turns when it doesn't open the timing, because it has been placed in the open position before, after using the timing, the timing stops in the disconnected position, and at this time, it rotates in the opposite direction of the timing to the position that turns when the timing is not opened.

Related Notes:

The fan does not rotate due to overheating. There is a motor in the fan device, and there will be an overheating circuit breaker in the motor, and if there is a short circuit in the coil winding, it will generate heat.

Increase in a short period of time, in which case the motor will "strike" and not move.

If the capacitor capacity becomes smaller and the fan does not rotate, you can remove the capacitor and replace it with a new capacitor of the same model, it is recommended to choose a capacitor that is 20% larger than the original capacitor, which will have a better rotation effect.

In many cases, the reason why the fan blades do not rotate is poor maintenance. If the blade is stiff after turning off the power, you should use some lubricating oil to drip into the shaft so that it can be lubricated so as not to affect the motor to drag the blade.

The above content reference: Encyclopedia - Electric Fan (Electrical Appliances).

Electric fanIf you don't turn on the timer, you won't turn it, what's going on? ”

In this case, the timer is faulty, and the timer can be turned in the normally open position, that is, the knob is turned counterclockwise to the head. If the electric fan still cannot be started after the head is screwed, it means that the contacts of the timer are deformed or displaced, and the contacts cannot be connected. If you have the ability to do it, you can remove it yourself and adjust the contacts, so that the knob is in the normally open state, and the contacts are always kept in the normally open state, that is, the contacts are always close and good.

When the timer is working, the tip of the lever switch "A" leaves the groove, the timer switch contact "B C" will be turned on, and the fan will run. When the timer time expires, the tip of the lever switch returns to the groove, the contacts are disconnected, and the fan stops.

When adjusting, you can adjust the static contact "c" upwards to shorten the distance between the two contacts, so that when the timer is turned on, the two contacts can be in close contact.

This is caused by your improper use, when the timer is twisted clockwise, when it is turned on, the power is turned on, but there is a limit to the use time.

When you need to use it for a long time, you can twist it counterclockwise, and it feels like there is a small pit, but it is not limited by the timer.

The timer is broken, change the timer and it will be normal.

If it is a mechanical timer, because the timer is not in the state of being on the left or in the state of time, it must not rotate. If it's an electronic product, the timing program is out of order.

Rotate the timer counterclockwise to the end and you're good to go.

Dear, hello, I'm glad to answer for you, what to do if the electric fan does not turn when pressed to the timer, the solution is as follows: the electric fan plug is loose or the line is not energized. When the electric fan does not rotate, we must first check whether the power plug is loose, and try to reinsert the socket to confirm.

Then check whether the wire of the electric fan has any traces of breakage, the wire is easy to break when it is in a discounted state for a long time. Reason 2: The electric fan motor lacks lubricating oil.

We all know that the core component of the electric fan is the motor, and only the rotation of the motor shaft can make the electric fan rotate. After using it for a period of time, the electric fan will have difficulty rotating due to the lack of lubricating oil on the shaft, which will eventually cause the electric fan to not rotate. In the case of power failure, use your hand to toggle the fan blade next to the section, if the fan blade rotation is more sluggish, it can be judged that the motor lacks lubricating oil.

The reasons why the electric fan timer does not turn off the electric fan may be as follows:1Timer Failure:

If the timer of the electric fan fails, it may cause the electric fan to turn off and not start again. In this case, you need to check whether the timer is normal, such as replacing the timer or repairing the fault. 2.

Power failure: A malfunction in the power supply of the electric fan may also cause the electric fan to fail to start. You can check whether the power cord is plugged in and whether the power socket is normal.

3.Motor failure: A malfunction of the motor of the electric fan may also cause the electric fan to fail to start.

At this time, it is necessary to check whether the motor is normal, such as replacing the motor or repairing the fault. 4.Power outage or split power outage:

If the fan does not have power**, it will also cause the fan to not start. At this time, you need to check whether the power supply is normal, if you need to contact the power supply department or check the circuit fault. In short, if the timer of the electric fan cannot be started after being turned off and disturbed, you need to check the timer, power supply, motor, etc., and if necessary, you can ask professionals to overhaul or replace parts.

Electric fan at this time.

The switch and the power supply are in a state of disconnection and non-contact, and the electric fan will naturally not rotate. If you want the fan to turn again, turn the timer and continue to time. If you don't want to use the timer function, you can twist the timer switch in reverse to the normally open position, turn on the power supply, and the fan will be in normal operation.

You can do it according to the instructions of the electric fan manual. Common problems and solutions of electric fans: 1. The fan blades do not rotate or the speed is slow

Electric fans need regular maintenance, check whether there is something entangled in the bearings of the fan blades, clean up the dust at the bearings, and lubricate them properly with lubricating oil. 2. Fan overheating: When using the fan daily, it is necessary to control the use time of the fan, and do not let the fan work for too long, as long-term work will lead to an increase in the heat of the fan, and the circuit current will continue to increase, which may cause the wire to burn out.

Therefore, in summer, don't use a fan to blow too much for a long time, and let the fan rest and dissipate heat regularly. 3. Smaller capacitance: As the service life of the fan increases, the wear and tear of various functions of the fan will be more serious, and the capacitance capacity of the fan will gradually decrease, which may cause the fan to fail to rotate.

In this case, a new capacitor can be replaced. 4. The fan switch is damaged or in poor contact: After plugging in the power supply, it is found that the fan does not rotate when the switch is turned on.

It may be that there is a problem with the internal circuit contact of the fan switch, so open the fan switch and check the relevant circuits of the switch for maintenance. If the switch is an integral switch, it can be replaced as a whole.

The electric fan can only be timed, and it can't be turned on when it doesn't work.

The electric fan can only be timed, and it can't be turned on when it's not timed, what's going on, hello dear, the timing of the fan is turned off, and the fan doesn't turn, generally because the timing switch of the fan has not been restored. When the timing of the fan is turned off, the switch contact inside the timer of the Nianqi fan will always be disconnected, and if the fan is turned on again, the fan will naturally not run. You can rotate the timing switch of the fan in the direction of the opening of the orange tomb, and it may be necessary to rotate in the direction of opening until you can not rotate Wu Wang, so that you can reach the on-on position of the timer not opening, and the force must be light when rotating, not too strong.

If the electric fan is the same as the ordinary washing machine, turn the timer motor and spin up. Now the electric fan plug is plugged into the power supply, and the electric fan is rotated, indicating that the timer has not retreated to the stop position, which means that the electric fan has been used for a long time, and the spring steel plate inside is old and damaged, and the timer can not be withdrawn to the stop position. Twist the timer in the opposite direction by hand to return the timer to the stopping position, so that the electric fan will not spin up when the timer is not turned on.

An electric fan timer is a mechanical clockwork that actuates a power switch. The timer knob turns the ruler counterclockwise to close the timer, and closes clockwise for the timing state. This one of yours may be closed in a broken state and in a normally closed state, so as long as you press the switch button, the fan will automatically rotate.

Summary. Kiss Hello thank you for waiting I am happy to answer your question when the timer of the electric fan is turned off and the fan does not turn Kiss This is a normal phenomenon, after the timing ends, the internal circuit of the electric fan is disconnected, so the electric fan will not rotate again. If you want to exit the timing state of the electric fan, you can turn the timing switch in the opposite direction and turn it to the open position, and the fan will rotate normally after the normal power-on, and there will be no more timing.

When turning the timer switch, pay attention to the strength to control.

Kiss Hello thank you for your waiting, I'm happy to answer your questions, the electric fan timer is turned off, the fan won't turn off, kiss This is a normal phenomenon, after the timing ends, the circuit of the electric fan is disconnected, so the electric fan will not rotate again. If you want to exit the timing state of the electric air and the buried fan, you can turn the timing switch in reverse and turn it to the open position, and the fan will rotate normally after the normal power-on, and there will be no more timing. When turning the timer switch, pay attention to the strength to control.

Kiss <>

Precautions for daily use of electric fans: 1. In the process of daily use of electric fans, it is necessary to lubricate the shaft of the electric fan regularly, which can reduce the loss of the shaft in the working process and prolong the service life of the electric fan. 2. Clean the fan blades and other parts of the electric fan regularly, because the fan will generate static electricity during rotation and absorb dust, so the fan hole needs to be cleaned regularly.

When cleaning the fan blades, be sure to cut off the power supply, pay attention to the strength when disassembling the fan blades, wipe carefully, and prevent the fan blades from deforming and affecting subsequent use. 3. During the use of the electric fan, if the temperature of the electric fan is found to be high and the heat is abnormal, cut off the power supply in time and cool it down. Find out if the fan is overheating because the internal components of the fan are damaged, and repair and replace it in time.

4. Turn on the fan at home and try to use the low gear as little as possible, the speed of the low-gear fan is relatively slow, but the current is larger than usual, which will affect the service life of the fan. 5. Before using the electric fan, the electric fan should be comprehensively inspected, whether the plug is damaged, whether the wire contact is poor, whether the screws of each part are fixed, and then use it after checking that it is correct.

Kiss Sorry, I can't add a third party for the time being, because it will cause both of us to be banned.